Assessment of corrosion resistance of surface-coated galvanized steel by analysis of the AC impedance spectra measured on the salt-spray-tested specimen

In the present work, corrosion resistance of surface-coated galvanized steel was quantitatively determined by an analysis of the alternating current (AC) impedance spectra measured on the salt-spray-tested specimen. To evaluate the corrosion resistance of the surface-coated galvanized steel, AC impedance spectroscopy was performed on the salt-spray-tested specimen previously exposed to salt-sprayed corrosive environment. From the analysis of the impedance spectra, the area fraction transient of white rust θ ₂(t) was theoretically derived from the equivalent circuit equation by using two fitting parameters. The values of the two fitting parameters were determined by fitting the empirical transient equations to the area fraction of the resin coating layer and to the total resistance obtained from the impedance spectra measured, respectively. From the analyses of θ ₂(t) for four kinds of surface-coated galvanized steels with various resin coating layers, it is indicated that as the values of the two fitting parameters decrease in the order of CP, GI, OD and OM (commercial trade names) specimens, the corrosion resistance increases in that order as well. Furthermore, from the quantitative comparison of the two fitting parameters with the polarization resistance of the upper resin coating layer R _p determined from the potentiodynamic polarization curve, it is suggested that the two fitting parameters decrease in value as well with increasing R _p.     

Carbon dioxide fixation by microalgae photosynthesis using actual flue gas discharged from a boiler

To mitigate CO₂ discharged from thermal power plants, studies on CO₂ fixation by the photosynthesis of microalgae using actual exhaust gas have been carried out. The results are as follows.

Intramolecular Dynamics and Molecular Structure of Europium(III) Chelate Complexes with Crown Ethers as Studied by NMR Spectroscopy

Earlier the intramolecular inversion of the 18-crown-6 molecules was found in the complex ion pairs [Ln(ptfa)₂ (18-crown-6)]⁺ [Ln(ptfa)₄]⁻ (H₂O)₄ where Ln = La(1), Ce (2), Pr (3), Nd (4), and ptfa is 1,1,1-trifluoro-5,5-dimethyl-2,4-hexanedione. In this work the peculiarities of the molecular structure and dynamics were studied for [Eu(ptfa)₂ (18-crown-6)]⁺ [Eu(ptfa)₄]⁻ (H₂O)₄ (5) by NMR spectroscopy techniques. Through VT-NMR spectra analysis the temperature dependence was obtained for the rate constant. The free energy ΔG^‡(320) of 18-crown-6 ring inversion activation was found to be 65 ± 5 kJ mol⁻¹ for 5 in CDCl₃. This result is comparable with the earlier data [S.P. Babailov and D.A. Mainichev: J. Inclusion Phenom. Macrocyclic Chem. 43, 187–193 (2002)] for complexes 2, 3, 4 in deuterated toluene (ΔG^‡(320)=65 ± 9, 64 ± 9, 64 ± 9 kJ mol⁻¹ respectively). It was found by relaxation NMR spectroscopy that the effective distance between Ln and protons of the crown molecule is 4.5 ± 0.2 Å. The analysis of structural parameters testifies that the crown ether and chelated anions are in the first coordination sphere of a Ln cation. Obtained geometrical parameters show that the complex cations of Eu, Ce and Pr have similar spatial structures.This revised version was published online in July 2005 with a corrected issue number.     

Orthokinetic Aggregation in Two Dimensions of Monodisperse and Bidisperse Colloidal Systems

Orthokinetic aggregation of colloids trapped at the air–liquid interface was studied by direct imaging in a couette cell. This method allowed us to follow the temporal evolution of both the cluster-mass distribution and the cluster structure at a shear rate where Brownian aggregation is suppressed. The interactions between the monodisperse latex particles floating at the air–liquid interface were controlled either by varying the electrolyte concentration or by creating a bidisperse system through the addition of small particles. The results show that the clusters in all of the systems are characterized by a high fractal dimension, indicating that the clusters are rearranged and densified by the shear. Kinetic analysis suggests that aggregation of monodisperse systems mainly proceeds through homogeneous aggregation, i.e., large clusters sticking to other large clusters. The bidisperse system, finally, with a size ratio around 10, favored a more heterogeneous aggregation among small and large clusters throughout the aggregation process; a slightly lower fractal dimension was observed compared to the strongly aggregated monodisperse system.     

A result on hypothesis testing for a multivariate normal distribution when some observations are missing

Let U_i = (X_i, Y_i), i = 1, 2,…, n, be a random sample from a bivariate normal distribution with mean μ = (μ_x, μ_y) and covariance matrix

. Let X_i, i = n + 1,…, N represent additional independent observations on the X population. Consider the hypothesis testing problem H₀ : μ = 0 vs. H₁ : μ ≠ 0. We prove that Hotelling's T² test, which uses (X_i, Y_i), i = 1, 2,…, n (and discards X_i, i = n + 1,…, N) is an admissible test. In addition, and from a practical point of view, the proof will enable us to identify the region of the parameter space where the T²-test cannot be beaten. A similar result is also proved for the problem of testing μ_x ? μ_y = 0. A Bayes test and other competitors which are similar tests are discussed.     

The use of silicon in the preparation of apolar glass capillary columns

As an extention of previous reports, variables affecting the performance of columns modified by silicon deposition have been optimized. The aim of this work was to produce thermostable apolar glass capillary columns regardless of the glass type used and to maintain column performance under stressful conditions. The main parameters studied were the influence of glass type, leaching effects, and silicon layer thickness on column activity. Deactivation and stationary phase conditions were held constant. Both coated and uncoated columns were tested. The thickness of the silicon layer was found to be relatively unimportant. There was no difference whether soft glass or borosiiicate glass was used and leaching before silicon deposition did not influence column activity. Bare silicon surfaces showed considerable activity especially in respect to interactions with free acids and bases. There are indications that the surface consists of silicon oxide and other oxygenated forms of silicon rather than of the element. Treatment of the silicon layers with dilute hydrofluoric acid and the strict exclusion of traces of oxygen and water did not improve the situation. In spite of such specific interactions, silicon surfaces were easily deactivated by heat treatment with polysiloxanes. Silicon surfaces deactivated by baking with octamethyltetrasiloxane at 400°C are inert and temperature stable and show characteristics similar to persilylated surfaces.     

Dynamic covalent approach to [2]- and [3]roxtanes by utilizing a reversible thiol-disulfide interchange reaction

A dynamic covalent approach to disulfide-containing [2]- and [3]rotaxanes is described. Symmetrical dumbbell-shaped compounds with two secondary ammonium centers and a central located disulfide bond were synthesized as components of rotaxanes. The rotaxanes were synthesized from the dumbbell-shaped compounds and dibenzo-[24]crown-8 (DB24C8) with catalysis by benzenethiol. The yields of isolated rotaxanes reached about 90 % under optimized conditions. A kinetic study on the reaction forming [2]rotaxane 2 a and [3]rotaxane 3 a suggested a plausible reaction mechanism comprising several steps, including 1) initiation, 2) [2]rotaxane formation, and 3) [3]rotaxane formation. The whole reaction was found to be reversible in the presence of thiols, and thermodynamic control over product distribution was thus possible by varying the temperature, solvent, initial ratio of substrates, and concentration. The steric bulk of the end-capping groups had almost no influence on rotaxane yields, but the structure of the thiol was crucial for reaction rates. Amines and phosphines were also effective as catalysts. The structural characterization of the rotaxanes included an X-ray crystallographic study on [3]rotaxane 3 a.     

Electron beam pretreatment of sewage sludge before anaerobic digestion

The pretreatment of waste-activated sludge (WAS) by electron beam irradiation was studied in order to improve anaerobic sludge digestion. The irradiation dose of the electron beam was varied from 0.5 to 10 kGy. Batch and continuous-flow stirred tank reactors (CFSTRs) were operated to evaluate the effect of the electron beam pretreatment on anaerobic sludge digestion. Approximately 30–52% of the total chemical oxygen demand (COD) content of the WAS was solubilized within 24 h after electron beam irradiation. A large quantity of soluble COD, protein, and carbohydrates leached out from cell ruptures caused by the electron beam irradiation. Volatile fatty acids production from the irradiated sludge was approx 90% higher than that of the unirradiated sludge. The degradation of irradiated sewage sludge was described by two distinct first-order decay rates (k ₁ and k ₂). Most initial decay reaction accelerated within 10 d, with an average k ₁ of 0.06/d for sewage sludge irradiated at all dosages. The mean values for the long-term batch first-order decay coefficient (k ₂) were 0.025/d for irradiated sewage sludge and 0.007/d for unirradiated sludge. Volatile solids removal efficiency of the control reactor fed with unirradiated sewage sludge at a hydraulic retention time (HRT) of 20 d was almost the same as that of the CFSTRs fed with irradiated sludge at an HRT of 10 d. Therefore, disintegration of sewage sludge cells using electron beam pretreatment could reduce the reactor solid retention time by half.     

Rapid and sensitive determination of ephedrine and pseudoephedrine by micellar electrokinetic chromatography with on-line regenerating covalent coating

A rapid, sensitive and reproducible micellar electrokinetic chromatographic method using hexamethyldisilazane as on-line regenerating covalent coating was developed for the quantification of ephedrine (E) and pseudoephedrine (PE). E and PE were derivatized with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazol for laser-induced fluorescence detection. The on-line regenerating covalent coating formed a combinative double coating with the subsequently produced dynamic SDS coating. The total coating can be easily removed and conveniently regenerated on-line. The simple coating procedure was described. By a series of optimization, a running buffer of 20 mm Na(2)B(4)O(7) + 16 mm SDS was applied for the separation of the derivatives. Linear relationships for E and PE were obtained in the range of 0.044-6.60 microg mL(-1) (correlation coefficients: 0.9975 for E, 0.9981 for PE), and the detection limits for E and PE were 1.71 and 0.67 ng mL(-1), respectively. The separation speed, the reproducibility and the sensitivity were much improved over those of other capillary electrophoresis methods more recently reported. The method was applied to the analysis of the two alkaloids in traditional herbal preparations with recoveries in the range 92.8-104.8%.     

Fast and reversible migrations of N,S-centered groups around the perimeter of cyclopropene and cycloheptatriene rings

The kinetics and mechanism of circumambulatory rearrangements of N-centered (NCS) and S-centered (SPh, SC₃Ph₃, SC(OEt)=S) groups in corresponding derivatives of 1,2,3-triphenylcyclopropene and cycloheptatriene were studied by dynamic¹H and¹³C NMR spectroscopy. Migrations of the isothiocyanate group occur by the dissociation-recombination mechanism with intermediate formation of a tight ionic pair. Migrations of the phenylthio group around the perimeter of cyclopropene and cycloheptatriene rings occur by the 1,2-shift mechanism. It was found that rearrangements of theO-ethyl dithiocarbonate group inS-(1,2,3-triphenylcyclopropen-3-yl)-O-ethyl dithiocarbonate occur by the 3,3-sigmatropic shift mechanism. The molecular and crystal structure ofO-ethylS-(1,2,3-triphenylcyclopropen-3-yl) dithiocarbonate was studied by X-ray analysis.