可控表面磷原子修饰提升超细W2C纳米颗粒电解水析氢反应性能

研究高活性和稳定性的非贵金属基析氢催化剂对解决当前能源危机和环境污染问题具有重要意义.碳化钨具有与贵金属Pt类似的d带电子结构,因而成为一类新兴的非贵金属析氢催化剂,受到广泛关注.磷掺杂是提高催化剂析氢活性的有效方法之一,然而目前最常见的构筑磷掺杂方法是使用多金属氧酸盐(POMs,如H3PW12O40),其固定的W/P原子比导致W2C中的掺杂浓度难以调控,并且磷掺杂主要是进入碳载体而不是碳化物本身,从而导致无法明确杂原子对其电催化析氢活性的贡献.本文采用植酸(PA)为磷源设计合成了可控磷掺杂W2C纳米颗粒,并探讨了催化剂组分、杂原子掺杂位置与析氢性能之间的关系.深入研究了磷掺杂碳化钨(WCP)的化学结构和析氢活性.与原始的W2C催化剂相比,WCP具有更高的本征活性、更快的电子转移速率和更多的活性位数量,并且在酸性和碱性条件下均表现出较好的析氢性能.特别是过电位为-200 mV时,WCP催化剂的本征活性在酸性和碱性条件下分别为0.07和0.56 H2 s-1,高出纯W2C(0.01和0.05 H2 S-1)数倍.同时,在电流密度为-10 mA cm-2时,优化后的WCP催化剂在酸性和碱性条件下的析氢过电位分别降低了96和88 mV.XPS及EDS元素分析结果表明,随磷源添加量增加,磷掺杂从碳化钨表面逐渐向内部扩散,进一步说明磷取代位置与析氢活性之间的构效关系,高浓度的表面磷取代可以加速质子捕获过程,从而显著提高其析氢活性,而过量的内部磷取代会破坏W2C结构,降低电子转移速率,从而导致析氢性能下降.利用密度泛函理论计算深入研究了WCP具有较好析氢性能的原因,与内部磷取代相比,表面磷取代会使碳化钨表现出更合适的氢吸附自由能,并且更加有效地降低了氢释放势垒,从而优化了析氢反应动力学.综上,本文为元素掺杂工艺提供了新的思路,同时研究了表面异质原子对析氢活性的关键作用,为该类催化材料的构效关系研究提供了新思路.     

SnO2表面卤化提高钙钛矿太阳能电池光伏性能

钙钛矿太阳能电池(PSCs)成为近几年来迅速发展的新型太阳能电池,其中将SnO₂纳米粒子层用作电子传输层(ETL)的钙钛矿太阳能电池器件得到了广泛的关注。SnO₂有着更低的制备温度,使其具备应用于柔性器件的潜力,但与钙钛矿层能级不匹配等问题限制着其发展。而在界面处加入钝化层,尤其是表面卤化的方法或可解决这一问题。本文综合研究了SnO₂表面卤化对钙钛矿太阳能电池光伏性能的影响,选用四丁基氯化铵(TBAC)、四丁基溴化铵(TBAB)和四丁基碘化铵(TBAI)三种钝化材料对SnO₂表面进行钝化处理,并对钝化材料溶液进行了浓度梯度研究。通过材料形貌、结构和光学性能表征以及电池器件性能测试分析等方法,证明了SnO₂表面卤化可提高钙钛矿层的质量和PSCs光伏性能,并从器件内部电荷传输动力学等角度解释了器件性能改善的原因。为进一步说明其性能改善的机理,采用基于密度泛函理论(DFT)的第一性原理计算方法对材料表面性质进行了深入研究,从能量、结构、电荷密度、态密度、功函数等角度解释了表面卤化提高SnO₂/钙钛矿界面处电子传输特性的原因。实验和理论计算均表明TBAC对于SnO₂具有较好的钝化效果,并随着溶液浓度的提升钝化作用越明显。SnO₂表面卤化作用的深入研究不仅对提高电池器件性能具有实际意义,还能够帮助理解太阳能电池界面现象,为界面改性提供新的研究思路。     

基于RST-QFD-Bayes的新型装甲装备通用质量特性评价指标体系构建研究

针对新型装甲装备通用质量特性评价指标体系难以确定的问题,在明确评价指标体系构建原则的基础上,结合新型装甲装备特点,确定了通用质量特性初始评价指标及指标筛选要求,运用QFD将新型装甲装备通用质量特性需求映射为评价指标筛选要求,采用粗糙集理论(Rough Set Theory,RST)确定了指标筛选重要度,考虑到关联度的不确定性及多个专家估计值的平均值和估计值的波动程度,将贝叶斯理论引入关系矩阵的确定中,用区间数确定了关联度,进行了评价指标筛选,构建了新型装甲装备通用质量特性评价指标体系,为新型装甲装备通用质量特性评价奠定了基础。     

An Antibody with a Variable‐Region Coiled‐Coil “Knob” Domain

The X‐ray crystal structure of a bovine antibody (BLV1H12) revealed a unique structure in its ultralong heavy chain complementarity determining region 3 (CDR3H) that folds into a solvent‐exposed β‐strand “stalk” fused to a disulfide crosslinked “knob” domain. We have substituted an antiparallel heterodimeric coiled‐coil motif for the β‐strand stalk in this antibody. The resulting antibody (Ab‐coil) expresses in mammalian cells and has a stability similar to that of the parent bovine antibody. MS analysis of H–D exchange supports the coiled‐coil structure of the substituted peptides. Substitution of the knob‐domain of Ab‐coil with bovine granulocyte colony‐stimulating factor (bGCSF) results in a stably expressed chimeric antibody, which proliferates mouse NFS‐60 cells with a potency comparable to that of bGCSF. This work demonstrates the utility of this novel coiled‐coil CDR3 motif as a means for generating stable, potent antibody fusion proteins with useful pharmacological properties.     

Construction of a Live‐Attenuated HIV‐1 Vaccine through Genetic Code Expansion

A safe and effective vaccine against human immunodeficiency virus type 1 (HIV‐1) is urgently needed to combat the worldwide AIDS pandemic, but still remains elusive. The fact that uncontrolled replication of an attenuated vaccine can lead to regaining of its virulence creates safety concerns precluding many vaccines from clinical application. We introduce a novel approach to control HIV‐1 replication, which entails the manipulation of essential HIV‐1 protein biosynthesis through unnatural amino acid (UAA*)‐mediated suppression of genome‐encoded blank codon. We successfully demonstrate that HIV‐1 replication can be precisely turned on and off in vitro.     

Superelastic Organic Crystals

Superelastic materials (crystal‐to‐crystal transformation pseudo elasticity) that consist of organic components have not been observed since superelasticity was discovered in a Au‐Cd alloy in 1932. Superelastic materials have been exclusively developed in metallic or inorganic covalent solids, as represented by Ti‐Ni alloys. Organosuperelasticity is now revealed in a pure organic crystal of terephthalamide, which precisely produces a large motion with high repetition and high energy storage efficiency. This process is driven by a small shear stress owing to the low density of strain energy related to the low lattice energy.     

Crowning Proteins: Modulating the Protein Surface Properties using Crown Ethers

Crown ethers are small, cyclic polyethers that have found wide‐spread use in phase‐transfer catalysis and, to a certain degree, in protein chemistry. Crown ethers readily bind metallic and organic cations, including positively charged amino acid side chains. We elucidated the crystal structures of several protein‐crown ether co‐crystals grown in the presence of 18‐crown‐6. We then employed biophysical methods and molecular dynamics simulations to compare these complexes with the corresponding apoproteins and with similar complexes with ring‐shaped low‐molecular‐weight polyethylene glycols. Our studies show that crown ethers can modify protein surface behavior dramatically by stabilizing either intra‐ or intermolecular interactions. Consequently, we propose that crown ethers can be used to modulate a wide variety of protein surface behaviors, such as oligomerization, domain–domain interactions, stabilization in organic solvents, and crystallization.     

对新时期分析测试中心定位的思考

就如何理解和看待新时期分析测试中心的定位和发展,如何解决分析测试中心在结构和管理上存在的固有问题提出了粗略的观点.希望对分析测试中心的发展起到抛砖引玉的作用.