Nanostructured TiO2 cavitation agents for dual-modal sonophotocatalysis with pulsed ultrasound

Current sonochemical methods rely on spatially uncontrolled cavitation for radical species generation to promote chemical reactions. To improve radical generation, sonosensitizers have been demonstrated to be activated by cavitation-based light emission (sonoluminescence). Unfortunately, this process remains relatively inefficient compared to direct photocatalysis, due to the physical separation between cavitation event and sonosensitizing agent. In this study, we have synthesized nanostructured titanium dioxide particles to couple the source for cavitation within a photocatalytic site to create a sonophotocatalyst. In doing so, we demonstrate that site-controlled cavitation from the nanoparticles using pulsed ultrasound at reduced acoustic powers resulted in the sonochemical degradation methylene blue at rates nearly three orders of magnitude faster than other titanium dioxide-based nanoparticles by conventional methods. Sonochemical degradation was directly proportional to the measured cavitation produced by these sonophotocatalysts. Our work suggests that simple nanostructuring of current sonosensitizers to enable on-site cavitation greatly enhances sonochemical reaction rates.     

Unsupported gold nanocones as sonocatalytic agents with enhanced catalytic properties

Gold catalysts have attracted attention for enabling sustainable chemical processes under ambient conditions. This reactivity is attributed to the small size of the catalysts (<5 nm); however, their size also creates difficulty when removing from product streams and often require rare-metal additives to enhance reaction rate kinetics, thereby limiting the environmental benefits of these catalysts. Comparatively, submicron gold catalysts are easier to separate but are much less reactive under ambient conditions. In this study, we synthesized submicron gas-stabilising gold nanocones (gs-AuNCs) that are acoustically responsive to afford greater reaction rates than other conventional gold catalysts. We explore the catalytic performance of acoustically responsive gs-AuNCs exposed to focussed ultrasound at 5.0 MPa peak negative pressure and 1.1 MHz center frequency. Cavitation nucleated from gs-AuNCs significantly increased the sonocatalytic degradation of water pollutants without the need for co-catalysts. The ability to amplify catalysis with ultrasound by tailoring the morphology of the catalyst to control cavitation opens new paths for future designs of sonocatalysts that may enable a sustainable chemical approach needed for a broad range of industrial processes.     

Research on the Raman properties of NiFe/cicada wing composite SERS platform modified by silver nanoparticles

Composite structures have been widely concerned in the preparation of surface enhanced Raman scattering (SERS) substrates. In this paper, by solving the problem that the magnetic material was difficult to glow in magnetron sputtering, ferro-nickel (NiFe) alloy was deposited on the cicada wing (CW) and the NiFe/CW substrate was obtained. The results of sliver nanoparticles (Ag NPs) modified on the substrate were subsequently compared, and the SERS properties of the new Ag/NiFe/CW substrate were analyzed. Obviously, the intensity of SERS signals has been greatly improved after the modification of Ag NPs, and the substrate exhibits excellent reproducibility. The Ag NPs modified substrates were also applied to the detection of toxic crystal violet (CV) solution, which showed remarkable SERS activity. It has been proved that the strategy of modifying Ag NPs on the substrate to form a composite structure has great potential for improving the SERS performance of the substrate.     

BMP-6 Loaded Polyelectrolyte Complex Nanoparticles Inducing Osteogenic Differentiation and Apoptosis of Malignant Plasma Cells for Local Treatment of Multiple Myeloma

In the malignant plasma cell disease multiple myeloma (MM), bone lesions and resulting fractures caused by MM cell (MMC) accumulation represent a major cause of morbidity and mortality. Despite recent advantages in systemic treatment, residual MMCs remain, especially in bone lesions. Therefore an interfacial delivery system for local treatment of MM and induced bone disease based on polyelectrolyte complex nanoparticles (PEC NP) loaded with bone morphogenetic protein 6 (BMP-6) inducing de-novo bone formation and MMC apoptosis is presented herein. BMP-6 loaded PEC NP are fabricated by defined mixing bio-related cationic and anionic polysaccharides and BMP-6 according to molar ratio of BMP-6/PEC-NP of 1/3. BMP-6/PEC NP bound to a model substrate releases 10% BMP-6 sustainably within two weeks as accessed by infrared spectroscopy. BMP-6 loaded PEC NP adheres to cell membranes of MMCs and MSCs and activated phosphorylation of Smad 1/5. Osteogenic differentiation (ALP-concentration) is enhanced in MSCs (p < 0.05). All patient samples (10/10) of MMCs show significant induction of apoptosis (median 84%, p < 0.05). Finally, BMP-6/PEC NP are successfully integrated in a commercial hyaluronic acid based hydrogel material revealing MMC death as principal proof for the local treatment of MM induced bone lesions.     

Facile Synthesis of Manganese Tellurite Nanoparticles for Magnetic Resonance Imaging-Guided Photothermal Therapy

In this study, manganese tellurite (MnTeO₃) nanoparticles are developed as theranostic agents for magnetic resonance imaging (MRI)-guided photothermal therapy of tumor. MnTeO₃ nanoparticles are synthesized via a simple one-step method. The as-synthesized MnTeO₃ nanoparticles with uniform size show good biocompatibility. In particular, MnTeO₃ nanoparticles exhibit a high photothermal conversion efficiency (η = 26.3%), which is higher than that of gold nanorods. Moreover, MnTeO₃ nanoparticles also have high MRI performance. The longitudinal relaxivity (r₁) value of MnTeO₃ nanoparticles is determined to be 8.08 ± 0.2 mm ⁻¹ s⁻¹, which is higher than that of clinically approved T₁-contrast agents Gd-DTPA (4.49 ± 0.1 mm ⁻¹ s⁻¹). The subsequent MnTeO₃ nanoparticles-mediated photothermal therapy displays a highly efficient ablation of tumor cells both in vitro and in vivo with negligible toxicity. It is demonstrated that MnTeO₃ nanoparticles can serve as promising theranostic agents with great potentials for MRI-guided photothermal therapy.     

Sonocatalytic degradation of EDTA in the presence of Ti and Ti@TiO2 nanoparticles

The sonocatalytic degradation of EDTA (C₀ = 5 10⁻³ M) in aqueous solutions was studied under 345 kHz (P_ac = 0.25 W mL⁻¹) ultrasound at 22–51 °C, Ar/20%O₂, Ar or air, and in the presence of metallic titanium (Ti⁰) or core-shell Ti@TiO₂ nanoparticles (NPs). Ti@TiO₂ NPs have been obtained using simultaneous action of hydrothermal conditions (100–214 °C, autogenic pressure P = 1.0–19.0 bar) and 20 kHz ultrasound, called sonohydrothermal (SHT) treatment, on Ti⁰ NPs in pure water. Ti⁰ is composed of quasi-spherical particles (30–150 nm) of metallic titanium coated with a metastable titanium suboxide Ti₃O. SHT treatment at 150–214 °C leads to the oxidation of Ti₃O and partial oxidation of Ti⁰ and formation of nanocrystalline shell (10–20 nm) composed of TiO₂ anatase. It was found that Ti⁰ NPs do not exhibit catalytic activity in the absence of ultrasound. Moreover, Ti⁰ NPs remain inactive under ultrasound in the absence of oxygen. However, significant acceleration of EDTA degradation was achieved during sonication in the presence of Ti⁰ NPs and Ar/20%O₂ gas mixture. Coating of Ti⁰ with TiO₂ nanocrystalline shell reduces sonocatalytic activity. Pristine TiO₂ anatase nanoparticles do not show a sonocatalytic activity in studied system. Suggested mechanism of EDTA sonocatalytic degradation involves two reaction pathways: (i) sonochemical oxidation of EDTA by OH/HO₂ radicals in solution and (ii) EDTA oxidation at the surface of Ti⁰ NPs in the presence of oxygen activated by cavitation event. Ultrasonic activation most probably occurs due to the local heating of Ti⁰/O₂ species at cavitation bubble/solution interface.     

Effects of ultrasonic conditions on the interfacial property and emulsifying property of cellulose nanoparticles from ginkgo seed shells

Cellulose microparticles from ginkgo seed shells were treated by ultrasonic treatments within the selected output powders (150–600 W) and durations (10–60 min) to produce cellulose nanoparticles. The main aim of this study was to investigate effects of ultrasonic conditions on the interfacial property and emulsifying property of those cellulose nanoparticles. Compared to ultrasonic output powers, ultrasonic durations showed the greater influence on morphology and physical properties of cellulose nanoparticles. Atomic force microscopy revealed that noodle-like cellulose particles with 1100 nm in length gradually became the short rod-like nanoparticles with 300 nm in length with increasing of ultrasonic duration from 10 min to 60 min. Moreover, results of contact angles indicated that ultrasound could significantly improve hydrophobicity of cellulose nanoparticles. The interfacial shear rheology showed that although all cellulose nanoparticles exhibited the similar interface adsorption behavior which showed the initial lag-phase of adsorption, followed by the interface saturation, the time of this initial lag-phase was affected by ultrasonic conditions. The increase of ultrasonic duration and ultrasonic power could shorten the time of this initial lag-phase, suggesting the resulting cellulose nanoparticles easier adsorption at the O/W interface. It was probably attributed to its small size and high hydrophobicity induced by intense ultrasonic treatments. Meanwhile, the cellulose nanoparticles with small size and higher hydrophobicity exhibited the better emulsifying ability to stabilize oil-in-water emulsions due to the formation of the viscoelastic interfacial film. This study improved understanding about changes in interfacial and emulsifying properties of cellulose nanoparticles caused by ultrasonic treatments.     

钕敏化多层壳纳米结构的增强型染料敏化上转换发光

对于稀土离子掺杂的上转换发光,由于稀土离子吸收截面小、吸收范围窄,导致其发光强度受限.最近,在稀土上转换纳米粒子的表面连接近红外染料分子敏化发光,被证实是提高上转换发光强度的有效策略.然而,将染料分子连接经典的稀土Yb掺杂纳米粒子,并不能有效利用染料分子的敏化能力.针对这一问题,本文通过高温热分解法成功制备了Nd3+敏...     

Gold‐Nanoparticle‐Decorated Boron Nitride Nanosheets: Structure and Optical Properties

Synergetic cooperation of individual components of the nanocomposites (NCs) is responsible for their novel properties that lead to various technological applications. A simple chemical process depicting the deposition of functionalized gold nanoparticles on the surface of boron nitride nanosheets (BNNSs) in solution is reported. The structure, chemical composition, and optical properties of nanosheets are systematically studied. The deposition of Au nanoparticles on BNNS (BNNS_Au) results in plasmonic band modulation, thus altering the optoelectronic properties of BNNSs. The intense surface plasmon absorption band of BNNS_Au is narrowed and red‐shifted relative to the absorption band of as synthesized monometallic BNNSs. The observations reflect the strong interfacial interaction between BNNS and Au nanoparticles. This approach constitutes a basis for a simple process leading to the preparation of functionalized BNNSs and their utilization as nanoscale templates for assembly and integration with other nanoscale materials for futuristic optoelectronic devices.