绝缘微堆质子直线加速器关键技术研究进展

基于绝缘微堆技术的直线加速器由于其能够实现较高的粒子加速梯度,尤其在质子加速及肿瘤治疗领域的优势得到高度关注。目前该种加速器处于研发阶段,有一系列技术和工程问题有待解决。介绍了课题组在过去的两年里围绕建立一台1 MeV质子注入器原型样机在固态脉冲功率系统、绝缘微堆及质子束源等方面取得的研究进展。实现了耐压梯度接近20 MV/m的环形绝缘微堆样品,样品内径30 mm,外径50mm,厚度15mm,基本达到设计要求;固态脉冲功率系统实现了光导开关多路稳定工作模式,开关直流偏置耐压达到20kV,采用激光二极管触发同步系统在15路同步时实现了低于1ns的抖动,输出300kV的电压脉冲,输出电压脉冲宽度10ns;进行了低能质子加速束流动力学的初步分析和模拟工作,模拟结果表明采用微堆结构可以实现质子束的有效加速和传输。     

Absolute quantification of superoxide dismutase in cytosol and mitochondria of mice hepatic cells exposed to mercury by a novel metallomic approach

In the last years, the development of new methods for analyzing accurate and precise individual metalloproteins is of increasing importance, since numerous metalloproteins are excellent biomarkers of oxidative stress and diseases. In that way, methods based on the use of post column isotopic dilution analysis (IDA) or enriched protein standards are required to obtain a sufficient degree of accuracy, precision and high limits of detection. This paper reports the identification and absolute quantification of Cu,Zn-superoxide dismutase (Cu,Zn-SOD) in cytosol and mitochondria from mice hepatic cells using a innovative column switching analytical approach. The method consisted of orthogonal chromatographic systems coupled to inductively coupling plasma-mass spectrometry equipped with a octopole reaction systems (ICP-ORS-MS) and UV detectors: size exclusion fractionation (SEC) of the cytosolic and mitochondrial extracts followed by online anion exchange chromatographic (AEC) separation of Cu/Zn containing species. After purification, Cu,Zn-SOD was identified after tryptic digestion by molecular mass spectrometry (MS). The MS/MS spectrum of a doubly charged peptide was used to obtain the sequence of the protein using the MASCOT searching engine. This optimized methodology reduces the time of analysis and avoids the use of sample preconcentration and clean-up procedures, such as cut-off centrifuged filters, solid phase extraction (SPE), precipitation procedures, off-line fractions insolates, etc. In this sense, the method is robust, reliable and fast with typical chromatographic run time less than 20 min. Precision in terms of relative standard deviation (n = 5) is of 3–5% and detection limits is 0.21 ng Cu g⁻¹.     

Liquid extraction surface analysis in-line coupled with capillary electrophoresis for direct analysis of a solid surface sample

A surface-sampling technique of liquid extraction surface analysis (LESA) was in-line coupled with capillary electrophoresis (CE) to expand the specimen types for CE to solid surfaces. The new direct surface analysis method of LESA–CE was applied to the determination of organophosphorus pesticides, including glufosinate-ammonium, aminomethylphosphonic acid, and glyphosate on the external surface of a fruit such as apple. Without any sample pretreatment, the analytes sprayed on the surface of a half apple were directly extracted into a liquid microjunction formed by dispensing the extractant from the inlet tip of a separation capillary. After extraction, the analytes were derivatized in-capillary with a fluorophore 4-fluoro-7-nitro-2,1,3-benzoxadiazole and analyzed with CE-laser induced fluorescence (LIF). The limits of detection for glufosinate-ammonium, aminomethylphosphonic acid, and glyphosate were 2.5, 1, and 10 ppb, respectively, which are at least 20 times lower than the tolerance limits established by the U.S. Environmental Protection Agency. Thus, we demonstrated that LESA–CE is a quite sensitive and convenient method to determine analytes on a solid surface avoiding the dilution from sample pretreatment procedures including homogenization of a bulk sample.     

Role of nonlocal exchange in molecular crystals: The case of two proton‐ordered phases of ice

We present a periodic density functional theory investigation of twoproton‐ordered phases of ice. Their equilibrium lattice parameters,relative stabilities, formation energies, and densities of states havebeen evaluated. Nine exchange‐correlation functionals, representativeof the generalized gradient approximation (GGA), global hybrids,range‐separated hybrids, meta‐GGA, and hybrid meta‐GGA families havebeen taken into account, considering two oxygen basis sets. Althoughthe hydrogen‐bond network of ice is well reproduced at the B3LYP,M06‐L, or LC‐ wPBE levels, formation energies are only correctlyevaluated with the two former functionals. Band gaps on the other handare only quantitatively reproduced at the B3LYP level. These resultsindicate that this last functional, a de facto reference formolecular calculations, gives in average the most accurate results forthe considered ice properties. © 2011 Wiley Periodicals, Inc. J Comput Chem, 2011     

Sensitivity improvement of 1H-15N cross-polarization at high MAS frequency applied to NMR structural characterization of organic solids

(15)N CP/MAS solid state NMR should be a method of choice to obtain essential structural information on organic materials containing nitrogen atoms. However, the technique is generally not selected for the characterization of non-labelled chemical compounds, which represents the most common situation encountered by chemists. Actually, due to the poor sensitivity of (15)N the method is time-consuming and a very fine calibration is often a prerequisite to reach a sufficient signal/noise. The main drawback comes from the weakness of (15)N-(1)H dipolar couplings which leads to a splitting of the static Hartman Hahn condition into very narrow sideband conditions under MAS. Practically, it is more difficult to obtain a high enough CP transfer level on (15)N for the entire spectrum than on other more conventional nuclei like (13)C. An experimental investigation of the CP efficiency using the ramp and adiabatic CP transfer experiments is here proposed. Preliminary adjustments of experimental settings were first made on an (15)N-labeled substituted heterocyclic model system, and then applied to several other organic compounds. Particular attention was paid to the detection of non-protonated nitrogen atoms with a significant chemical shift anisotropy, which represented the least favourable case. It was experimentally demonstrated that, for these atoms, the adiabatic passage provided a much higher transfer level than the more conventional ramp sequence leading to an enhancement factor of up to 3.5 at a MAS frequency of 30 kHz. The resulting sensitivity rendered possible the detection of non-protonated nitrogen atoms at natural abundance with 2.5-mm rotors at 9.4 T.     

Solid lipid nanoparticles comprising internal Compritol 888 ATO, tripalmitin and cacao butter for encapsulating and releasing stavudine, delavirdine and saquinavir

Solid lipid nanoparticles (SLNs) with complex internal phase were fabricated for formulating stavudine (D4T), delavirdine (DLV), and saquinavir (SQV). The lipids including Compritol 888 ATO, tripalmitin, and cacao butter were stabilized by L-α-phospatidylcholine, cholesteryl hemisuccinate, and taurocholate to form SLNs. The results revealed that the morphology of SLNs was spheroidal with shallow surface pits. An increase in the weight percentage of Compritol 888 ATO increased the average diameter of D4T-entrapping SLNs and decreased that of DLV- and SQV-entrapping SLNs. Preservation at 4°C over 6 weeks slightly enhanced the size of SLNs. For a specific drug, an increase in the entrapment efficiency enlarged the nanocarriers. The order of drug in the average particle diameter and in the entrapment efficiency was SQV>DLV>D4T, in general. In addition, the dissolution of the three drugs from SLNs showed the characteristics of sustained release. The order of drug in the cumulative release percentage was D4T>DLV>SQV. SLNs containing Compritol 888 ATO, tripalmitin, and cacao butter are efficient in carrying antiretroviral agents for medicinal application.     

Synthesis of carbon-encapsulated iron nanoparticles via solid state reduction of iron oxide nanoparticles

The encapsulation of iron nanoparticles in protective carbon cages leads to unique hybrid core-shell nanomaterials. Recent literature reports suggest that such nanocomposites can be obtained in a relatively simple process involving the solid state carbothermal reduction of iron oxide nanoparticles. This approach is very attractive because it does not require advanced equipment and consumes less energy in comparison to widely used plasma methods. The presented more-in-depth study shows that the carbothermal approach is sensitive to temperature and the process yield strongly depends on the morphology and crystallinity of the carbon material used as a reductant.     

固体热载体热解霍林河褐煤实验研究

在处理量为10kg/h的粉煤-固体热载体移动床实验装置上,以循环灰为热载体对其进行了热解特性评价实验.考察了热解温度(460℃~610℃)、反应时间(6min~8min)及煤粒粒径对热解产物产率和组成的影响.结果表明,随着热解温度的升高,气体产率增大;焦油产率在520℃时达到最大值4.94%.热解煤气的热值为19.80...     

两相溶剂萃取黄连木籽油制备生物柴油

以黄连木籽为原料,采用乙醇/异己烷两相不互溶溶剂对其进行萃取处理.考察了乙醇／异己烷体积比、萃取温度和萃取时间对萃取过程的影响.通过实验确定最佳的萃取条件为,黄连木仁粉50 g,乙醇异己烷总体积300 mL,乙醇/异己烷体积比为50∶50,萃取温度40℃,萃取时间30 min.在此条件下,黄连木籽油出油率达到99.5％...     

具有不同活性中心的固体催化剂的失活模式

 An approach is suggested to distinguish different types of active sites responsible for different reactions on bifunctional catalysts. The model assumes a non-uniform vulnerability of active sites that depends on their location. Problems on the relationship between the dispersion of the active phase and selectivity are discussed. The effect of coke formation on the activity change of different sites is analyzed.