Application of a dispersive solid‐phase extraction method using an amino‐based silica‐coated nanomagnetic sorbent for the trace quantification of chlorophenoxyacetic acids in water samples

Herein, an amino‐based silica‐coated nanomagnetic sorbent was applied for the effective extraction of two chlorophenoxyacetic acids (2‐methyl‐4‐chlorophenoxyacetic acid and 2,4‐dichlorophenoxyacetic acid) from various water samples. The sorbent was successfully synthesized and subsequently characterized by scanning electron microscopy, X‐ray diffraction, and Fourier‐transform infrared spectroscopy. The analytes were extracted by the sorbent mainly through ionic interactions. Once the extraction of analytes was completed, they were desorbed from the sorbent and detected by high‐performance liquid chromatography with ultraviolet detection. A number of factors affecting the extraction and desorption of the analytes were investigated in detail and the optimum conditions were established. Under the optimum conditions, the calibration curves were linear over the concentration range of 1–250, and based on a signal‐to‐noise ratio of 3, the method detection limits were determined to be 0.5 μg/L for both analytes. Additionally, a preconcentration factor of 314 was achieved for the analytes. The average relative recoveries obtained from the fortified water samples varied in the range of 91–108% with relative standard deviations of 2.9–8.3%. Finally, the method was determined to be robust and effective for environmental water analysis.     

3‐(Pyridin‐4‐yl)acetylacetone: CdII and HgII compete for nitrogen coordination

3‐(Pyridin‐4‐yl)acetylacetone (HacacPy) acts as a pyridine‐type ligand towards Cd^II and Hg^II halides. With CdBr₂, the one‐dimensional polymer [Cd(μ‐Br)₂(HacacPy)Cd(μ‐Br)₂(HacacPy)₂]_∞ is obtained in which five‐ and six‐coordinated Cd^II cations alternate in the chain direction. Reaction of HacacPy with HgBr₂ results in [Hg(μ‐Br)Br(HacacPy)]_∞, a polymer in which each Hg^II centre is tetracoordinated. In both compounds, each metal(II) cation is N‐coordinated by at least one HacacPy ligand. Equimolar reaction between these Cd^II and Hg^II derivatives, either conducted in ethanol as solvent or via grinding in the solid state, leads to ligand redistribution and the formation of the well‐ordered bimetallic polymer catena‐poly[[bromidomercury(II)]‐μ‐bromido‐[aquabis[4‐hydroxy‐3‐(pyridin‐4‐yl)pent‐3‐en‐2‐one]cadmium(II)]‐di‐μ‐bromido], [CdHgBr₄(C₁₀H₁₁NO₂)₂(H₂O)]_n or [{HgBr}(μ‐Br){(HacacPy)₂Cd(H₂O)}(μ‐Br)₂]_∞. Hg^II and Cd^II cations alternate in the [100] direction. The HacacPy ligands do not bind to the Hg^II cations, which are tetracoordinated by three bridging and one terminal bromide ligand. The Cd^II centres adopt an only slightly distorted octahedral coordination. Three bromide ligands link them in a (2 + 1) pattern to neighbouring Hg^II atoms; two HacacPy ligands in a cis configuration, acting as N‐atom donors, and a terminal aqua ligand complete the coordination sphere. Classical O—H…Br hydrogen bonds stabilize the polymeric chain. O—H…O hydrogen bonds between aqua H atoms and the uncoordinated carbonyl group of an HacacPy ligand in a neighbouring strand in the c direction link the chains into layers in the (010) plane.     

采用二次等参体元时的接触判据

当二次等参体元用于分析接触问题时,接触面上节点集中接触力不同号给建立接触判据造成困难。本文建立了由节点集中接触力计算接触面上分布接触力节点值的方法,从而可顺利建立接触判据。此方法已成功应用于工程中的弹性固体接触问题分析,文末给出了一个计算实例。     

用固体润滑剂改善汽车刮水胶条使用性能的研究

作者将含有MoS_2和石墨的不同配方的固体润滑涂料刷涂在几种国产汽车刮水胶条上,并分别于干摩擦和水润滑的两种刮刷状态下,就固体润滑剂改善刮水胶条的擦拭性能进行了试验研究,指出这是使刮水胶条降低擦拭阻力、提高刮刷效果的可行途径,同时强调配制涂料时应当选用颗粒细小而均匀的固体润滑剂粉末。     

Application of a new fast multipole BEM for simulation of 2D elastic solid with large number of inclusions

A fast multipole method (FMM) is applied for BEM to reduce both the operation and memory requirement in dealing with very large scale problems. In this paper, a new version of fast multipole BEM for 2D elastostatics is presented and used for simulation of 2D elastic solid with a large number of randomly distributed inclusions combined with a similar subregion approach. Generalized minimum residual method (GMRES) is used as an iterative solver to solve the equation system formed by BEM iteratively. The numerical results show that the scheme presented is applicable to certain large scale problems. The project supported by the National Nature Science Foundation of China (10172053) and the Ministry of Education     

多胞材料的力学行为

多胞材料具有独特的力学性质,其工程应用日益增加.人造多胞材料可以分为蜂窝材料和泡沫材料两类.本文介绍了这两类材料在不同载荷条件下力学行为的研究概况.对于某些天然材料(木材和松质骨)的多胞结构及其模型也作了简要介绍.     

Mehrphasige Finite Elemente in der Verformungs- und Versagensanalyse grob mehrphasiger Werkstoffe

Übersicht Zur Simulation des elastoplastischen Verformungsverhaltens und von Versagensprozessen in grob mehrphasigen Materialien verwenden wir die Methode der Mehrphasigen Finiten Elemente. Der Verzicht auf die ausschließliche Verwendung einphasiger Finiter Elemente gestattet die spannungs-/Dehnungsanalyse an komplizierten Realgefügen. Die vorgestellten Beispiele für Verformungs- und Versagensanalysen stellen die Leistungsfähigkeit der Methode der Mehrphasigen Finiten Elemente hinsichtlich Modellieraufwand, Konvergenz und Zuverlässigkeit der Resultate unter Beweis.

---

     

Eléments finis stochastiques en élasticité linéaireA stochastic finite element method in linear mechanics

The stochastic finite element method presented in this Note consists in representing in a probabilistic form the response of a linear mechanical system whose material properties and loading are random. Each input random variable is expanded into a Hermite polynomial series in standard normal random variables. The response (e.g., the nodal displacement vector) is expanded onto the so-called polynomial chaos. The coefficients of the expansion are obtained by a Galerkin-type method in the space of probability. To cite this article: B. Sudret et al., C. R. Mecanique 332 (2004).     

Asymptotics of eigenfrequencies of an elastic body with a heavy and hard peak-shaped inclusion

A heavy and hard peak-shaped inclusion in an elastic body provokes to concentration of eigenvalues in the low-frequency range of the spectrum and localization of the corresponding eigenmodes near the peak tip. To cite this article: S.A. Nazarov, C. R. Mecanique 335 (2007).     

拉伸应变率对20钢层裂特性的影响

采用轻气炮加载技术和激光速度干涉(VISAR)测速技术相结合,对不同拉伸应变率条件下20钢的层裂特性进行了实验研究。通过改变飞片和样品的几何尺寸来调整拉伸应变率的大小,研究了拉伸应变率对20钢层裂强度的影响。实验的拉伸应变率的变化范围为104~106 s-1,最大拉伸应变率接近激光加载所能产生的拉伸应变率,相比激光加载,薄飞片技术容易保证一维应变条件。实验结果显示20钢的层裂特性明显依赖着拉伸应变率的大小,106 s-1条件下层裂强度比104 s-1时提高近70%。基于对数值计算结果的分析,讨论了影响层裂强度的主要外载荷因素。