TIR透镜优化设计在LED微投影显示系统中的应用

发光二极管（lighting emitting diode,LED）取代传统光源作为投影仪,特别是微投影显示系统的光源是一种趋势。采用由非球面构成的TIR透镜代替锥形光管和CPC集光器,并通过整个系统最终在目标屏上形成的照明效果为依据,对TIR透镜的内部结构尺寸参数进行优化设计,采用经过优化设计的TIR 透镜作为对LED光源所发光束进行收集整形的光学元件,克服了在传统投影显示系统中经常出现的锥形光管或复合抛物面集光器 (compound parabolic concentrator,CPC) 给整个系统所带来的光学体积大的缺点。以单片式LCOS（liquid crystal on silicon）结构为基础,利用RGB LED时序方式进行混色,设计了一套LED微投影显示系统,并通过光线追迹程序对其光学性能进行模拟评估。结果表明：在考虑时序混色方式影响的情况下,整体系统光能效率为2.38%,系统光学体积仅为125cm3,达到了对系统结构简单紧凑的设计要求。     

渐进多焦点镜片的逐点定向曲率补偿优化设计

提出一种利用逐点定向曲率补偿法对渐进多焦点镜片初始模型进行整体优化以减小周边散光区（俗称盲区）的优化设计方法。推导出自由曲面任意方向法曲率的计算公式、确定主曲率和主方向的方法,求出镜片初始模型上各点的曲率差和最大曲率方向、最小曲率方向,通过迭加由不同曲率、不同轴向微小柱面构成的自由曲面,来实现逐点定向曲率补偿,使镜片各点的曲率差适当减小,从而减小散光。给出具体优化步骤和一个优化设计实例,并进行实际加工制作与检测。对比优化前后的光焦度和散光度的面形分布图。结果表明,逐点定向曲率补偿法能有效减小渐进多焦点镜片初始模型的最大散光并明显扩大视远区清晰视觉范围。     

基于Goose LDW-PSO的管壳式换热器优化设计

管壳式换热器在工业中的应用越来越广泛,对于设计者和使用者来说使其费用最小化是一个很重要的目标。本文以最小化管壳式换热器的总费用为优化目标,提出了运用基于雁群启示的惯性权重线性下降粒子群优化算法(Goose LDW-PSO)对其进行优化设计。为了验证这种方法的有效性,用Goose LDW-PSO对管壳式换热器进行了优化设计,并与原始设计结果进行了比较。比较结果表明,虽然管子数目增加,但是换热器的总费用比传统方法少了很多。     

基于跳距修正L-M优化的WSN定位算法

针对DV-Hop定位算法在节点随机分布的网络拓扑环境下存在误差较大的问题,文中通过分析平均跳距估计、未知节点坐标估计区域求解对定位精度的影响,提出了一种基于跳距修正L-M优化的WSN定位算法CLDV-Hop(Correct L-M DV-Hop)。仿真结果表明,在不增加额外开销且仿真环境相同的条件下,CLDV-Hop算法比现有改进的算法具有更高的定位精度,与DV-Hop算法相比精度提高了约33%——41%。     

Investigation on optimization design of equivalent water depth truncated mooring system

The oil industry is now increasingly concentrating their efforts and activities in connection with developing fields in deeper waters, ranging typically from 500 m to 3000 m worldwide. However, the modeling of a full-depth system has become difficult presently; no tank facility is sufficiently large to perform the testing of a complete FPS with compliant mooring in 1000 m to 3000 m depth, within reasonable limits of model scale. Until recently, the most feasible procedure to meet this challenge seems to be the so-called “hybrid model testing technique”. To implement this technique, the first and important step is to design the equivalent water depth truncated mooring system. In this work, the optimization design of the equivalent water depth truncated mooring system in hybrid model testing for deep sea platforms is investigated. During the research, the similarity of static characteristics between the truncated and full depth system is mainly considered. The optimization mathematical model for the equivalent water depth truncated system design is set up by using the similarity in numerical value of the static characteristics between the truncated system and the full depth one as the objective function. The dynamic characteristic difference between the truncated and full depth mooring system can be minished by selecting proper design rule. To calculate the static characteristics of the mooring system, the fourth order Runge-Kutta method is used to solve the static equilibrium equation of the single mooring line. After the static characteristic of the single mooring line is calculated, the static characteristic of the whole mooring system is calculated with Lagrange numerical interpolation method. The mooring line material database is established and the standard material name and the diameter of the mooring line are selected as the primary key. The improved simulated annealing algorithm for continual & discrete variables and the improved complex algorithm for discrete variables are employed to perform the optimization calculation. The C++ programming language is used to develop the computer program according to the object-oriented programming idea. To perform the optimization calculation with the two algorithms mentioned above respectively and the better result is selected as the final one. To examine the developed program, an example of equivalent water depth truncated mooring system optimum design calculation on a 100,000-t, turret mooring FPSO in water depth of 320 m are performed to obtain the conformation parameters of the truncated mooring system, in which the truncated water depth is 160 m. The model test under some typical environment conditions are performed for both the truncated and the full depth system with model scale factor λ=80. After comparing the corresponding results from the test of the truncated system with those from the full depth system test, it’s found that the truncated mooring system design in this work is successful. Supported by the National Natural Science Foundation of China (Grant Nos. 10602055 and 40776007) and the Natural Science Foundation of China Jiliang University (Grant No. XZ0501)     

Improved nonlinear optimization in the storage ring of the modern synchrotron radiation light source

In the storage ring of the third generation light sources, nonlinear optimization is an indispensable course in order to obtain ample dynamic acceptances and to reach high injection efficiency and long beam lifetime, especially in a low emittance lattice. An improved optimization algorithm based on the single resonance approach, which takes relative weight and initial Harmonic Sextupole Integral Strength （HSIS） as search variables, is discussed in this paper. Applications of the improved method in several test lattices are presented. Detailed analysis of the storage ring of the Shanghai Synchrotron Radiation Facility （SSRF） is particularly emphasized. Furthermore, cancellation of the driving terms is investigated to reveal the physical mechanism of the harmonic sextupole compensation. Sensitivity to the weight and the initial HSIS as well as dependence of the optimum solution on the convergent factor is analyzed.     

Alternative difference analysis scheme combining R‐space EXAFS fit with global optimization XANES fit for X‐ray transient absorption spectroscopy

Time‐resolved X‐ray absorption spectroscopy (TR‐XAS), based on the laser‐pump/X‐ray‐probe method, is powerful in capturing the change of the geometrical and electronic structure of the absorbing atom upon excitation. TR‐XAS data analysis is generally performed on the laser‐on minus laser‐off difference spectrum. Here, a new analysis scheme is presented for the TR‐XAS difference fitting in both the extended X‐ray absorption fine‐structure (EXAFS) and the X‐ray absorption near‐edge structure (XANES) regions. R‐space EXAFS difference fitting could quickly provide the main quantitative structure change of the first shell. The XANES fitting part introduces a global non‐derivative optimization algorithm and optimizes the local structure change in a flexible way where both the core XAS calculation package and the search method in the fitting shell are changeable. The scheme was applied to the TR‐XAS difference analysis of Fe(phen)₃ spin crossover complex and yielded reliable distance change and excitation population.     

Contributions to the Optimization of a Caprolactam Production Plant by Radiotracer Techniques

Residence time spectra and material distributions in an operating caprolactam production plant were measured by means of sodium 24, bromine 82 and technetium 99m. The results of the tracerexperiments contributed to an optimization of the plant.     

太赫兹场中里德堡铷原子的相干操控

采用含时多态展开方法研究了太赫兹场中里德堡铷原子布居数迁移的动力学过程,计算了一个太赫兹脉冲序列与三能级里德堡铷原子系统相互作用后的布居数分布,以及多脉冲序列对多量子态里德堡铷原子系统的相干操控,给出了同一主量子数n中不同角量子数l态布居数的含时演化过程.结果表明:通过优化太赫兹脉冲序列参数,铷原子布居数可由初态被抽运到较高的目标态,在太赫兹频率范围实现里德堡原子的操纵与控制.     

小功率高转速蒸汽透平试验研究和优化

小功率高转速蒸汽透平试验研究和优化邵振麒（同济大学汽车工程系上海２０００９２）关键词：小蒸汽透平，效率，优化１前言回收能量和工业装置的余热及利用太阳能等新能源是节能和环保的重要措施，由此产生的机械能可供发电，气体增压等多种用途。在一些废热量不大且不宜...