Modified characteristic finite difference fractional step method for moving boundary value problem of nonlinear percolation system

A fractional step scheme with modified characteristic finite differences running in a parallel arithmetic is presented to simulate a nonlinear percolation system of multilayer dynamics of fluids in a porous medium with moving boundary values. With the help of theoretical techniques including the change of regions, piecewise threefold quadratic interpolation, calculus of variations, multiplicative commutation rule of difference operators, multiplicative commutation rule of difference operators, decomposition of high order difference operators, induction hypothesis, and prior estimates, an optimal order in l ² norm is displayed to complete the convergence analysis of the numerical algorithm. Some numerical results arising in the actual simulation of migration-accumulation of oil resources by this method are listed in the last section.     

钯/聚苯胺纳米多层膜的制备及对抗坏血酸和多巴胺的催化氧化

采用脉冲电位法(PPSM)结合聚苯胺(PANI)的层层自组装制备了Pd/PANI交替沉积纳米多层膜, 并用于抗坏血酸(AA)和多巴胺(DA)的检测. 实验发现, 多层膜结构形貌及催化性能受前躯体K₂PdCl₆浓度、 脉冲条件及膜厚度等影响. 当K₂PdCl₆浓度为2×10^-3 mol/L, 阴极脉冲电位为-0.3 V, 阶跃次数为17时, 5层Pd/PANI修饰玻碳电极对AA和DA的催化性能最佳; 在0.1 mol/L磷酸盐缓冲液中, AA和DA的氧化峰明显分离[ΔE_p(AA, DA)=160 mV], 其峰电流与浓度分别在5×10^-5～4×10^-4和4×10^-5～1×10^-4 mol/L范围内呈较好线性关系, 实现了对AA和DA的同时测定. 该修饰电极具有良好的抗干扰性和稳定性.     

以聚电解质多层膜为纳米反应器制备Au@Pt核壳纳米粒子

以聚二烯丙基二甲基氯化铵和聚苯乙烯磺酸钠为构筑单元,通过静电层层自组装制备了多层膜,利用薄膜中存在的抗衡阴离子,选择AuCl-4和PtCl2-6作为Au和Pt的前驱体,通过连续的阴离子交换/还原,原位制备了Au-Pt双金属纳米粒子。 紫外-可见分光光度法、透射电子显微镜和能量色散X射线能谱数据表明,在聚电解质多层薄膜中成功地制备了具有核壳结构的Au@Pt双金属纳米粒子。 这种纳米粒子在电化学催化、燃料电池方面具有潜在的应用价值。     

应力各向异性下耦合三层薄膜铁磁共振

研究铁磁/铁磁/反铁磁三层薄膜中应力各向异性场对共振场的影响.得到系统存在声学和光学两种模,并且随着应力场的增强,在某些区域声学模和光学模共振场均向高值方向移动.此外发现声学模共振场对两铁磁层厚度的依赖较大,对光学模而言,随着两铁磁层厚度的改变,应力各向异性场对其共振场的影响甚微.     

硅基底多层薄膜结构材料残余应力的微拉曼测试与分析

针对MEMS器件制备中两种典型的硅基底多层薄膜结构的残余应力问题,本文提出了利用微拉曼光谱技术测量其残余应力的方法,分析并给出了硅基底多层薄膜结构中的残余应力分布规律。实验结果表明,在硅基底和薄膜内存在较大的工艺残余应力,残余应力在基底内靠近薄膜两侧部分呈非线性变化,在基底内主要呈线性变化,并引起基底整体翘曲。基于实验结果分析,提出了硅基底多层薄膜结构的分层结构模型。本文工作表明微拉曼光谱技术是测量与研究硅基底多层薄膜结构残余应力的一种有力手段。     

渗流耦合系统动边值问题特征分数步差分方法

对多层渗流方程耦合系统动边值问题,提出适合并行计算的一类特征分数步差分格式,利用区域变换、变分形式、粗细网格配套、乘积型叁二次插值、差分算子乘积交换性、高阶差分算子的分解、先验估计的理论和技巧,得到收敛性的最佳阶l2误差估计．该方法已成功地应用到多层油资源运移聚集的资源评估生产实际中,得到了很好的数值模拟结果．     

Fabrication and characterization of ultra-low noise narrow and wide band Josephson parametric amplifiers

We have fabricated two types of lumped-element Josephson parameter amplifiers (JPAs) by using a multilayer micro-fabrication process involving wet etching of Al films. The first type is a narrow band JPA which shows typical gain above 14 dB in a bandwidth around 35 MHz. The second type is a wideband JPA which is coupled to an input 50 Ω transmission line via an impedance transformer that changes the impedance from about 15 Ω on the non-linear resonator side to 50 Ω on the input transmission line side. The wideband JPA could operate in a 200 MHz range with a gain higher than 14 dB. The amplifiers were used for superconducting qubit readout. The results showed that the signal to noise ratio and hence the readout fidelity were improved significantly.     

基于分子动力学方法的多层石墨烯超滑失效机理分析

本文作者采用混合势函数(Lennard-Jones势和REBO势),基于Verlet算法动态模拟了金刚石探针(100)与多层石墨烯间的压入和滑动摩擦过程,分析了不同压深下多层石墨烯的摩擦力及平均摩擦系数变化的特点,统计了不同压深下的层间键合作用、层内断键数量以及实际原子接触面积,阐述了多层石墨烯超滑失效的机理.结果表明:压深对多层石墨烯间的超滑失效有着重要影响,探针压深增加导致的摩擦力振幅上升与悬空石墨烯压缩应变增加产生的影响非常相似;6.1(A)是石墨烯超滑失效的临界压入深度值,压深小于6.1(A)时,石墨烯有着明显的超滑特性,且摩擦力变化周期不受压深的影响,并等于石墨烯晶格常数;压深大于6.1(A)后,摩擦力变化完全失去周期性,探针在滑动中需要克服的势垒急剧上升,摩擦力显著增大,超滑明显失效.当压深为6.1(A)时,石墨烯层间开始出现键合作用,层内也出现断键现象,且随压深的增加越加剧烈,层内的断键和层间键的形成是引起石墨烯超滑失效和摩擦力突变的主要原因,而实际原子接触面积与此突变的相关性很小.     

Influence of magnetic layer thickness on[Fe_(80)Ni_(20) O/SiO_2]_n multilayer thin films

In the present work, a series of [Fe80Ni20–O/SiO2]n multilayer thin films is fabricated using a reactive magnetron sputtering equipment. The thickness of SiO2 interlayer is fixed at 3 nm, while the thickness values of Fe80Ni20–O magnetic films range from 10 nm to 30 nm. All films present obvious in-plane uniaxial magnetic anisotropy. With increasing the Fe80Ni20–O layer thickness, the saturation magnetization increases slightly and the coercivity becomes larger due to the enlarged grain size, which could weaken the soft magnetic property. The results of high frequency magnetic permeability characterization show that films with thin magnetic layer are more suitable for practical applications. When the thickness of Fe80Ni20–O layer is 10 nm, the multilayer film exhibits the most comprehensive high-frequency magnetic property with a real permeability of 300 in gigahertz range.