Preparation and characterization of NiFe bimetallic micro-particles and its composite with silica shell

Magnetic NiFe particles were synthesized through hydrothermal method using hydrazine as reductant. Composite particles with core-shell structure were further achieved by depositing silicon dioxide generated via carbonation decomposition of sodium silicate solution on the surface of magnetic cores. Characterized by XRD, the Ni₉Fe particles are of fcc-type structure, and the structure of magnetic cores in composite particles was maintained despite being covered by SiO₂ shell. The existence of SiO₂ shells in the composite particles were demonstrated by SEM, EDS and IR. The results from TG and VSM indicated that the shell structure affected the physiochemical properties. The composite particles exhibited remarkable resistance to oxidation in comparison with Ni₉Fe particles due to being protected by SiO₂ shell. Meanwhile, both of them are soft magnetic materials, but Ms, Mr and Hc in Ni₉[email protected]₂ particle decreased compared with magnetic NiFe particles. The formation mechanisms of Ni₉Fe micro-particles and composite Ni₉Fe particles were discussed.     

Facilitated transport of Hg(II) through novel activated composite membranes

The results presented in this work deal with the prime application of activated composite membranes (ACMs) for the transport of Hg(II) ions in a continuous extraction–re-extraction system using di-(2-ethylhexyl)dithiophosphoric acid (DTPA) as carrier. The effects of variables such as the pH, the nature of the acid and the concentration of the casting solutions on the transport of Hg(II) are also investigated. When the ACM was prepared with a 0.5 M DTPA solution and when the feed solution contained 2.5×10^–4 M Hg(II) in 0.1 M HCl, the amount of mercury extracted was greater than 76%. The re-extracted mercury was subsequently recovered by means of a stripping phase comprising 0.3 M thiourea solution in 2 M H₂SO₄, yielding 54% of the initial amount of mercury after transport had taken place for 180 min.     

High modulus polyimide/polyimide molecular composite films that utilize acetylene unit as a crosslink site

Polyimide/polyimide molecular composite (MC) films comprised of a rigid polyimide derived from biphenyltetracarboxylic dianhydride (BPDA) and p-phenylenediamine (PDA) and a flexible polyimide derived from BPDA and bis (3,3'-diaminodiphenyl) acetylene (intA) and/or oxydianiline (ODA) were prepared by blending the polyamic acid solutions in 7 : 3 weight ratio, and then imidizing the blend films. Acetylene content in the flexible polyimide backbone was controlled by the ratio of intA and ODA. Cold-drawing of the blend polyamic acid films, followed by imidization, gives high modulus polyimide/polyimide MC films. The modulus of the MC films increased almost linearly with the draw ratio, reaching 25.5 GPa for the 40% drawn film. Acetylene groups in the flexible polyimide can be thermally cured to crosslink. The onset of exotherm appeared at 340°C on DSC, reaching maximum at 398°C. After the thermal crosslinking, the MC films maintained the high modulus, though elongation became small. Taking advantage of the crosslinkable acetylene units, two MC films were laminated and processed at 400°C for 20 min under 100 kg/cm² to give a good-quality laminate film. The interface of the two films was strongly bonded through the crosslinking of acetylene groups. Laminate films maintained the high modulus afforded by the cold-drawing. © 1994 John Wiley & Sons, Inc.     

Ce0.8Y0.2O1.9-Ca3(PO4)2-K3PO4复合电解质在中温区的质子导电性及在常压合成氨中的应用

A precursor of Ce_0.8Y_0.2O_1.9(YDC) solid electrolyte was synthesized by the gol-gel method. YDC and phosphates powders were prepared by mixing the YDC and phosphates according to different weight ratios. The mixtures of the YDC and binary phosphates were ground and sintered at 1 400 ℃. The proton conductivity in solid electrolyte of the sintered samples was examined using electrochemical methods at 400～800 ℃. Ammonia was synthesized from nitrogen and hydrogen at atmospheric pressure in the solid state proton conducting cell reactor. The optimal condition for the ammonia production was determined. The result indicated that composite electrolyte of 80wt% YDC: 20wt% binary phosphates as proton conductor could obtain the highest ionic conductivity and ammonia production rate among the four samples, the rate of evolution of ammonia was up to 9.5 × 10^-9 mol·s^-1·cm^-2.     

双马来酰亚胺增韧研究Ⅱ.链扩展双马来酰亚胺及其树脂的合成及表征

合成了一系列结构不同和链长短不一的双马来酰亚胺，并对其结构和性能作了表征，同时研究了它们的固化反应和固化产物的性能。用双马来酰亚胺和二烯丙基化合物反应制造了增韧树脂，研究了该树脂的固化和热稳定性。     

Synthesis, characterization and thermal analysis of polyaniline/ZrO2 composites

Conducting polyaniline-zirconium dioxide (PANI/ZrO₂) composites were synthesized by ‘in situ’ deposition technique in the presence of hydrochloric acid (HCl) as dopant by adding the fine grade powder (average particle size of approximately 20 nm) of ZrO₂ into the polymerization reaction mixture of aniline. The composites obtained were characterized by infrared spectra (IR) and X-ray diffraction (XRD) and thermogravimetric analysis (TGA). TG curves and DTG curves of the composites suggest that the thermal degradation process of PANI/ZrO₂ composites proceeds in two-steps and the composites are more thermally stable than that of the pure PANI. The improvement in the thermal stability for the composites is attributed to the interaction between PANI and ZrO₂, which restricts the thermal motion of PANI chains and shields the degradation of PANI in the composites.     

Investigations for Modification of Polyacrylamide-Bentonite by Phytic Acid and its Usability in Fe3+, Zn2+ and UO2 2+ Adsorption

Composite of polyacrylamide-bentonite (PAA-B) was prepared by direct polymerisation of PAA in a suspension of bentonite (B). Adsorption and thermodynamic features of phytic acid (Phy) adsorption onto B, PAA and PAA-B, and those of Fe³⁺, Zn²⁺, UO₂ ²⁺ adsorption onto PAA-B and its modification by Phy (PAA-B-Phy) have been investigated. The reusability, storagability, ion selectivity and recoverability of sorbed ions with 1 M HCl have also been considered.The chemical and physical structure of adsorbents has been characterised by means of FT-IR and XRD. All adsorption isotherms for Phy and the ions were L-type of the Giles classification except, the one which is S type for adsorption of Phy onto PAA. The maximum adsorption capacities for the ions adsorbed were in order of UO₂ ²⁺ > Fe³⁺ > Zn²⁺ for PAA-B and Zn²⁺ > Fe³⁺ > UO₂ ²⁺ for PAA-B-Phy. Langmuir equilibrium constants for the adsorption of ions onto PAA-B-Phy were significantly higher than those found for PAA-B; the magnitude of increase for UO₂ ²⁺ was about 100. The thermodynamic parameters indicated that adsorption reactions are spontaneous in terms of adsorption free enthalpy.The chemical structure of PAA-B-Phy was not changed at the end of the studies of reusability and storagability. The composite was selective for UO₂ ²⁺ of the ions of interest.The composite of PAA-B and its modification by Phy have been used for the first time in this investigation. It is proposed that the composites can be practically used in the investigations and applications of adsorption.     

B2O3/TiO2-ZrO2催化环己酮肟气相Beckmann重排反应研究 Ⅰ.B2O3含量的影响

 制备了不同B2O3含量（0～20％）的B2O3／TiO2－ZrO2固体酸催\r\n化剂，用XRD，FT－IR，N2吸附及NH3－TPD等方法测定了其结构、比表\r\n面积、孔分布和表面酸性．结果表明，当B2O3含量较低（≤5％）时，\r\n催化剂呈无定形态，样品中的B2O3主要以BO4结构存在．当B2O3含量较\r\n高（≥8％）时，催化剂中的TiO2－ZrO2以ZrTiO4晶相存在，分散于Ti\r\nO2－ZrO2表面的B2O3主要以玻璃体形式和BO3结构存在．随着B2O3含量\r\n的增加，催化剂的比表面积减小，孔径增大．300℃下的环己酮肟气相\r\nBeck－mann重排反应结果表明，随着B2O3含量的增加，己内酰胺的选择\r\n性逐渐增大，而己内酰胺的收率在B2O3含量为12％时达到最大值．讨论\r\n了B2O3／TiO2－ZrO2的催化性能与其表面酸性及孔径大小的关系．     

Renewable sol-gel carbon ceramic electrodes modified with a Ru-complex for the amperometric detection of l-cysteine and glutathione

A renewable three-dimensional chemically modified carbon ceramic electrode containing Ru [(tpy)(bpy)Cl] PF₆ was constructed by sol-gel technique. It exhibits an excellent electro-catalytic activity for oxidation of l-cysteine and glutathione at pH range 2-8. Cyclic voltammetry was employed to characterize the electrochemical behavior of the chemically modified electrode. The electrocatalytic behavior is further exploited as a sensitive detection scheme for l-cysteine and glutathione by hydrodynamic amperometry. Optimum pH value for detection is 2 for both l-cysteine and glutathione. The catalytic rate constants for l-cysteine and glutathione were determined, which were about 2.1×10³ and 2.5×10³ M⁻¹ s⁻¹, respectively. Under the optimized condition the calibration curves are linear in the concentration range 5-685 and 5-700 μM for l-cysteine and glutathione determination, respectively. The detection limit (S/N=3) and sensitivity is 1 μM, 5 nA/μM for l-cysteine and 1 μM, 7.8 nA/μM for glutathione. The relative standard deviation (RSD) for the amperogram's currents with five injections of l-cysteine or glutathione at concentration range of linear calibration is <1.5%. The advantages of this amperometric detector are: high sensitivity, good catalytic effect, short response time (t<3 s), remarkable long-term stability, simplicity of preparation and reproducibility of surface fouling (RSD for six successive polishing is 3.31%). This sensor can be used as a chromatographic detector for analysis of l-cysteine and glutathione.