Optimisation of the chlorthalidone chiral separation by capillary electrochromatography using an achiral stationary phase and cyclodextrin in the mobile phase

The separation of chlorthalidone enantiomers in capillary electrochromatography on an achiral stationary phase when adding a chiral selector, hydroxypropyl-β-cyclodextrin, to the mobile phase, was optimised. The goal was to investigate the feasibility of modelling retention times and resolution when during the optimisation procedure regular replacement of columns is required due to their fragility. Therefore, it is essential that the packing procedure delivers reproducible columns. The optimisation of an existing chlorthalidone separation was chosen as case study. The influence of two factors, chiral selector concentration and organic modifier content, on the responses was modelled. The experiments performed prior to modelling were defined by a central composite design. Results on different columns, obtained under identical experimental conditions, were found comparable and thus modelling was possible in situations where several columns were required to complete a design. A second-order polynomial model was built for both responses. Optimal separations were also predicted using Derringer’s desirability functions. The optimum was found at 33 mM cyclodextrin and 16% (v/v) acetonitrile on two types of columns (with different packing times) leading to a strong reduction in analysis time for an equally good separation compared to the initial conditions. Measured and predicted responses were found comparable, indicating that acceptable models were obtained.     

Heat transfer in polymer composites filled with inorganic hollow micro-spheres: A theoretical model

The heat transfer mechanisms in inorganic hollow micro-spheres filled polymer composites are analyzed in the present paper. This heat transfer includes mainly three mechanisms: (1) thermal conduction between solid and gas; (2) thermal radiation between the hollow micro-sphere surfaces; and (3) natural thermal convection of the gas in the micro-hollow spheres. A theoretical model of heat transfer in polymer/inorganic hollow micro-sphere composites is established based on the law of minimal thermal resistance and the equal law of the specific equivalent thermal conductivity, and a corresponding equation of effective thermal conductivity is derived. The effective thermal conductivity (k_eff) of hollow glass bead-filled polypropylene composites is estimated by using this equation, and is compared with the numerical simulations by means of a finite element method. The results show that the variation of the theoretical estimations of k_eff are similar to the numerical simulations at lower filler volume fraction (φ_f20%). Moreover, k_eff decreases linearly with increasing φ_f, and reduces somewhat with increase of filler size.     

CuCrAl和CuCrZr低温液相合成甲醇催化剂的研究

 用络合共沉淀法制备了CuCrAl和CuCrZr复合氧化物液相合成甲醇催化剂，其比表面分别达到119和116m2／g．在5．0～5．5MPa和383K条件下，分别用间歇式和流动式反应釜考察了催化剂的活性和稳定性．结果表明：CuCrAl和CuCrZr的活性均明显高于CuCr；CuCrAl的活性略高于CuCrZr，但甲酸甲酯（MF）的选择性明显低于CuCrZr；两者在12h内未见活性明显下降．甲醇钠在反应过程中部分转化为甲酸钠和NaOH．CuCrAl和CuCrZr有较高的氢解活性可抑制甲醇钠与MF生成甲酸钠，从而有较低的甲酸钠浓度．但是，Al2O3和ZrO2的酸性有利于甲醇脱水，引起甲醇钠水解生成NaOH．溶剂对CuCr基催化剂的活性和选择性有明显影响．对反应机理进行了讨论．     

导电复合材料葡萄糖氧化酶传感器的研究

报导了用乙基纤维素和乙炔黑获得的导电复合材料构成的葡萄糖氧化酶生物传感器的制备方法.讨论了多种因素对该生物传感器响应电流的影响.测得此电极酶催化反应的活化能为40.3 kJ•mol－1. AFM实验表明，用环己烷洗去石蜡的导电复合材料 葡萄糖氧化酶生物传感器具有粒状结构，这有利于酶催化反应的进行.     

Preparation of Co3O4 Nanofibers via an Electrospinning Technique

Thin PVA/cobalt acetate composite fibers were prepared by using sol-gel processing and electrospinning technique.After calcination of the above precursor fibers,Co3O4 nanofibers with a diameter of 50-150 nm could be successfully obtained.The fibers were characterized by SEM,FT-IR,WAXD,respectively.     

计算单向复合材料弹性模量的新公式

根据复合材料单层的实际构造，提出了串并联组合模型，采用微观力学与宏观力学相结合的方法，推导出一组计算单向复合材料弹性模量的新公式。其优点是：Ｅ１和ｖ（１２）、Ｅ２和Ｇ（１２）的计算式形式对称，结构简单，计算容易，物理意义明确。我们把由世界上许多著名学者提出的多组预测公式和本文导出式计算所得的结果与国内外已发表的硼／环氧、碳／环氧、玻璃／环氧复合材料的实验数据相比较，结果表明：导出式比其他公式精确、更有价值，可供二程设计使用。     

聚苯胺复合材料研究进展

综述了聚苯胺/无机物复合材料和聚苯胺/有机高聚物复合材料的合成方法，性能特征，并展望了聚苯胺复合材料的研究，应用前景。     

ZrO2纳米粉末复合羊毛纤维研究

ＺｒＯ_２纳米粉末复合羊毛纤维研究陈代荣，樊悦朋（山东大学化学系济南２５０１００）关键词ＺｒＯ_２纳米粉末，羊毛纤维，复合纤维由陶瓷粉末和天然纤维形成的复合纤维的强度、织品的保暖性、抗起球性及防缩性能等均有所提高，报道较多的是微米级陶瓷粉末（粒径０．５...     

Morphology and tensile properties of glass bead filled low density polyethylene composites: MATERIAL PROPERTIES

The mechanical properties of glass bead filled low density polyethylene (LDPE) composites in tension have been investigated by using an Instron material testing machine. It is found that with increase of the glass bead weight fraction (φ) the tensile modulus (E_c) and the tensile yield stress (σ_yc) increase as a form of nonlinear function but contrary to the elongation strain at break; the correlation between E_c and φ accords with the logarithmic mixing rule and the relationship between σ_y and the volume fraction (φ_f) can be described by means of a second order equation; the effects of the glass bead diameter on the mechanical properties are not large; when φ and the bead size are suitable, the enhanced toughness effect of the filled-systems is more significant; the tensile strength of the glass bead filled system pretreated with a coupling agent are somewhat greater than those of the untreated system. In addition, the morphology of the samples is studied to explain the relationship between the micro-structure and the mechanical properties of the composites.     

Trapping Copper Phthalocyanine in a Silica Sono-Xerogel

A copper phthalocyanine (CuPc) has been encapsulated in silica. The trapping effects were studied comparing the UV-Vis absorption spectra of some CuPc solutions and composites prepared under different conditions. The trapped organic molecules’ stability was monitored during the gelation and drying processes. Leachability test have been carried out with the aim of checking the trapping efficiency. Hydrolysis water of pH=2 and a molar ratioR _w =6 mol acid H₂O/mol TMOS leads to a higher CuPc stacking angle homogeneity. The increase of Pc induces a narrower mesopore distribution and helps the stabilization of the composite.