共焦激光扫描显微镜技术进展

共焦激光扫描显微镜已延伸到光学显微术领域，包括共焦荧光显微镜、共焦扫描光纤显微镜、彩色共焦激光显微镜、共焦光栅光学显微镜等。并很快成为半导体材料检测和生物医学诊断的重要工具。本文对国外该显微镜技术的特性和新的进展进行了综述。     

LD泵浦Nd：BGO晶体的自调Q激光器

首次实现了ＬＫ泵浦Ｎｄ∶ＢＧＯ固体激光器的１．０６４μｍ的激光输出，泵浦阈值功率为２５ｍＷ，在连续运转状态下得到最大为４０ｍＷ的ＴＥＭ００模输出，光－光效率为１３．３％，根据法拉第磁光效庆理论，了ＬＤ泵浦Ｎｄ∶ＢＧＯ自调Ｑ激光器的各种参数，并研制成该激光器，在该器件中，作为损耗调制元件的磁光调制器就是绕有线圈的Ｎｄ∶ＢＧＯ晶体本身，实验在重复率为１ＫＨｚ的条件下得到了ＦＷＨＭ为１００ｎｓ的稳定脉冲     

铝靶激光反射率的动态研究

本文分析了强激光作用下铝合金靶表面反射率的时间变化规律。利用转镜调Ｑ钕玻璃激光器和积分球装置对铝ＬＹ１２的表面激光反射率动态变化规律进行了测量，得到了功率密度在１０￣６～１０￣９Ｗ／ｃｍ￣２范围内的相应结果。同时，从金属近自由电子模型－Ｄｒｕｄｅ理论出发，对金属铝的电导率与温度变化关系进行了数值模拟，亦得到了相应的反射率变化规律，实验结果与数值模拟结果基本符合。当激光功率密度更同时（１０￣１１～１０￣１５Ｗ／ｃｍ￣２），由等离子体模型和局部热力学平衡（ＬＴＥ）理论，得到了反射率随温度变化的数值模拟结果，与国外的实验结果符合得较好。     

激光治疗近视眼中角膜曲率修正量的理论计算

本文从示意眼模型出发,利用自治的单透镜近似模型,根据矩阵光学原理,用计算机算出不同近视眼度数焦点的前移量以及在三种不同原因引起的近视眼的情况下角膜需要切除的数量。计算告诉我们即使1000°近视眼,角膜最大切除量也仅50μ,不到角膜总厚度的1/10。 理论上探讨了根据激光束的高斯分布经过光学系统改变光强分布来实现近视眼需要校正的曲率。     

Adsorbate motions induced by vibrational mode coupling

Adsorbate motions are discussed with a primary attention focused on the coupling between a vibrational mode excited by ultrafast laser heated hot-electrons or by inelastic tunneling electrons with scanning tunneling microscope and the reaction coordinate (RC) mode. Recent experimental results have demonstrated an efficient reaction pathways involving an indirect excitation of a frustrated translational mode, rather than its direct excitation for adsorbate hopping on surfaces. Elementary processes are briefly described for hopping of CO molecules on a laser heated stepped Pt surface, where excitation of the frustrated rotation mode has been found to plays an indispensable. Calculation of the inelastic tunneling current (ITC) for excitation of the C-O stretch mode of a CO molecule is combined with a theory of anharmonic mode coupling to activate the frustrated translation mode above the barrier. The hopping rate as a function of the bias voltage agrees with the experimental result. An unified theory of single-, and two-electron processes for ITC-induced motions induced by an indirect excitation of the RC-mode via mode coupling is also applied to reproduce a crossover from hopping to desorption of a single NH₃ molecule on Cu(1 0 0) with an increase in the tunneling current.     

A simple model for high fluence ultra-short pulsed laser metal ablation

The ultra-short laser metal ablation is a very complex process, the complete simulation of which requires applications of complicated hydrodynamics or molecular dynamics models, which, however, are often time-consuming and difficult to apply. For many practical applications, where the laser ablation depth is the main concern, a simplified model that is easy to apply but at the same time can also provide reasonably accurate predictions of ablation depth is very desirable. Such a model has been developed and presented in this paper, which has been found to be applicable for laser pulse duration up to 10 ps based on comparisons of model predictions with experimental measurements.     

Characterization of Ti6Al4V implant surface treated by Nd:YAG laser and emery paper for orthopaedic applications

A more noble and biocompatible Ti alloy was achieved at fluence of 140 J cm⁻² where the implant indicated a higher degree of hardness (825HV), higher corrosion resistance (−0.21 V) and highest hydrophilicity (i.e. θ_c = 37°) compared with 70° of the control sample. These values corresponded to 58 and 39 mN m⁻¹ of surface tension respectively. The laser treated samples at 140 J cm⁻² showed higher wettability characteristics than mechanically roughened surface. Cell growth and their spreading condition in a specific area were analyzed by SEM and Image J Program software. Clearly, more cells were attached (1.2 × 10⁵) to and spread (488 μm²) over the surface at 140 J cm⁻² than in any other condition. Pathologically, the treated samples indicated no sign of infection.     

用于全光缓存的光阈值门理论和实验研究

提出了一种基于光阈值门的全光缓存方案,采用两个非对称的SOA环形腔激光器耦合构成光阈值门,其输出光可以在两种波长上切换,可控制波长转换器实现光包路由,从而将需缓存的数据包路由到缓存端口,避免了复杂的包头处理.建立了光阈值门的理论模型,对10 Gbit/s的光阈值门的动态特性进行了数值模拟和实验研究,实验结果和理论计算结果相符合,实验也表明光阈值门两种输出状态的消光比可达30dB.     

The Analysis of Scattering Effect for the Transmission of 1.06?μm Laser In Lower Altitude Atmosphere

On the basis of Mie’s scattering theory, the light scattering properties of atmospheric molecules and aerosol particles are analyzed and a forward-scattering model for atmospheric transmission in city outskirts is built. Through theoretical analysis and the numerical calculations to the irradiance distribution of the 1.06 μm pulse laser while transmitting in lower altitude atmosphere, we can draw some conclusions which provide usable information for the research and manufacture of off-axis scattering warning systems.     

大气激光通信的实验测量

设计了大气激光通信信道测量系统，利用此系统在不同气象条件下进行了近地视距实验测量并采集了不同天气条件下的实验数据，详细分析讨论了所得实验数据并进行了误差分析．同时实验中获得了大量数据，为进一步完善大气激光信道模型提供了有力的依据．