基于邻域贡献权值细化的圆心亚像素定位算法

针对传统的圆心算法过程复杂、定位精度受初始边缘提取效果影响较大等问题,提出了一种基于邻域贡献权值细化的圆心亚像素定位算法。首先引入邻域贡献权值系数,改进传统非极大值抑制法,细化边缘;然后在边缘点的梯度方向对灰度值进行高斯拟合,确定亚像素边缘位置;最后针对边缘突变点提出了基于随机抽样一致的最小二乘法来拟合圆心。实验结果表明,该算法具有较好的精度和稳定性,圆心的提取精度可以达到0.1个像素。     

Direct Measurement of Ammonia in Ambient Air

Abstract

A model is proposed which addresses the factors involved in the axial light attenuation of a coated waveguide (collector/sensor) whose polymer coating has been sensitized to ammonia. The experimental results appear to corroborate the model predictions of high sensitivity (ppb) and independence of sample flow on the collector/sensor. Concentration and relative humidity both determine the slopes of the transmission curves, the latter factor of which can be reduced to a second order effect by controlling the relative humidity in the sample holder.     

Einfluß der Nachimpulse des Photosekundärelektronenvervielfachers bei Flüssigkeitsszintillationszählungen

Der Einfluβder Nachimpulse einiger Exemplare des Vervielfachertyps S 12 FS 35 vom VEB Carl Zeiss Jena auf die Flüssigkeitsszintillationszählung wurde in Abhängigkeit von verschiedenen Parametern untersucht. Daraus ergeben sich praktische Hinweise zur Vermeidung von Fehlmessungen durch Nachimpulse, die bei absoluten Aktivitätsbestimmungen mit dem Flüssigkeitsszintillationszähler (z. B. Meβkopf Nr. 25510 der Firma E. Zimmermann, Leipzig) unbedingt zu berücksichtigen sind.     

A LabVIEW-based real-time measurement system for polarization detection and calibration

A rapid real-time polarization measurement system was designed and implemented in this paper. The system is centered round a computer running application developed for the purpose. The paper illustrates how to build such an excellent application with National Instruments’ graphical programming language LabVIEW, a synchronized high speed multi-channels data acquisition card and some photoelectric conversion module in detail. With simple and friendly user interface, the experimental result shows that the measurement system has high computational efficiency, high precision calibration matrix, which can be efficiently utilized in experiments relating to the measurement of polarization.     

Testing local-realism and macro-realism under generalized dichotomic measurements

Generalized quantum measurements with two outcomes are fully characterized by two real parameters, dubbed as sharpness parameter and biasedness parameter and they can be linked with different aspects of the experimental setup. It is known that sharpness parameter characterizes precision of the measurements and decreasing sharpness parameter of the measurements reduces the possibility of probing quantum features like quantum mechanical (QM) violation of local-realism (LR) or macro-realism (MR). Here we investigate the effect of biasedness together with that of sharpness of measurements and find a trade-off between those two parameters in the context of probing QM violations of LR and MR. Interestingly, we also find that the above mentioned trade-off is more robust in the latter case.     

Induced Electronic and Thermal Effects of 86 MeV Nickel Ions in Bisphenol-A Polycarbonate

Bisphenol-A polycarbonate films were irradiated with 86 MeV swift heavy nickel ions at varying fluences, ranging from 1 × 10¹¹ to 1 × 10¹³ ions cm^?2, under vacuum at room temperature, to analyze the induced electrical and thermal modifications. AC conductivity measurements and UV-visible spectroscopy, Fourier transform infra-red (FTIR) spectroscopy, thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) techniques were applied to analyze the changes. A significant, exponential increase in conductivity at higher frequency was observed with the increase of nickel ion fluence. UV-visible analysis corroborated the results of the AC conductivity measurement, revealing the increase in size of the carbon clusters embedded in the polymer network, with the increase of heavy ion fluence. FTIR analysis revealed the formation of alkene and alkyne end groups at higher doses, which further supported the suggestion that the variation in electrical properties induced by the ion irradiation of the polymer was due to development of a carbonaceous phase inside the polymer due to the irradiation. Thermal analysis, i.e., TGA and DSC patterns, showed that chain-scission was the leading phenomena in the heavy ion-irradiated polycarbonate samples, resulting in degradation of their thermal stability.     

An improved edge detection algorithm for depth map inpainting

Three-dimensional (3D) measurement technology has been widely used in many scientific and engineering areas. The emergence of Kinect sensor makes 3D measurement much easier. However the depth map captured by Kinect sensor has some invalid regions, especially at object boundaries. These missing regions should be filled firstly. This paper proposes a depth-assisted edge detection algorithm and improves existing depth map inpainting algorithm using extracted edges. In the proposed algorithm, both color image and raw depth data are used to extract initial edges. Then the edges are optimized and are utilized to assist depth map inpainting. Comparative experiments demonstrate that the proposed edge detection algorithm can extract object boundaries and inhibit non-boundary edges caused by textures on object surfaces. The proposed depth inpainting algorithm can predict missing depth values successfully and has better performance than existing algorithm around object boundaries.     

Dielectric barrier discharge in needle-to-plane configuration: Model of surface charge relaxation

Relaxation process of surface charge owing to dielectric barrier discharge (DBD) in “needle – air gap – polyethylene terephthalate film – plane” configuration is considered. Experimental data of the surface charge relaxation (SCR) are obtained by means of the rotating capacitive probe. Taking into account Gaussian radial distribution of accumulated charge density, effective surface and volume electrical conductivities of a barrier dielectric, phenomenological model of SCR for any dielectric thickness is proposed and exact solutions are obtained. The adequacy of the model is confirmed by the numerical computation. There is a good agreement between the experimental results and the model calculations.     

Structural, optical and electromagnetic properties of aluminum-clay nanocomposites

Aluminum pillared and exchanged bentonite particles were synthesized by the ion exchange method. The characteristics of the particles were investigated by Fourier-transform infrared spectra (FTIR), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), scanning electron microscope (SEM), electron dispersive X-ray spectrometer (EDS), reflectance spectrophotometer (RS) and electromagnetic transition instrument (ETI). FTIR spectra showed a successful incorporation of Al complexes into the clay interlayer. The TGA result demonstrated an improvement in thermal stability of the Al-pillared clay compared with the untreated particles. SEM and EDX results showed the presence of aluminum aggregates on the surface of clay. It was also found that Al ions affect electromagnetic properties of the clay particles.     

Highly sensitive bend sensor with hybrid long-period and tilted fiber Bragg grating

We demonstrate a new type of fiber optic bend sensor with a hybrid structure made up of a long period grating (LPG) and a tilted fiber Bragg grating (TFBG). The sensing mechanism is based on the spectrum of power transfers between the core and cladding modes from a TFBG located downstream from a LPG. We show that the curvature of a beam can be determined by the reflected power difference between the core mode and the recoupled cladding modes. We further provide design rules for the LPG and TFBG to optimize and linearize the sensor response. In addition, the temperature cross-sensitivities of this configuration are also investigated for two different types of fiber.