Moisture Removal from a Two-Layer Porous Media: A Conceptual Model and Experimental Results

Moisture removal from a two-layer porous media in which air is circulated through one layer and moisture is removed from the second has not been well studied due to the emphasis given to single-layer systems. This two-layer configuration is common in natural and engineered systems and can be used as a means to create a barrier to downward migrating fluids and to remove liquids and gases that may be present in the finer layer. However, there is little data on moisture removal from a two-layer porous media in which air is circulated through one layer parallel to the interface and moisture is removed from the finer second layer by evaporation. A conceptual model of the moisture removal from a two-layer porous media system was developed and compared to experimental moisture removal rates from laboratory scale dry barriers. The limited experimental data agrees well with the results predicted by the conceptual model, providing an initial validation.     

从电磁感应定律看负磁导率的产生过程

以左手材料中产生负磁导率的开口谐振环结构模型为例,从磁导率的定义出发,借助于电磁感应定律,推导了负磁导率的产生过程.     

Determination of slug permeability factor for pressure drop prediction of slug flow pneumatic conveying

Current models for pressure drop prediction of slug flow pneumatic conveying in a horizontal pipeline system assume some type of steady state conditions for prediction,which limits their capability for increased predictive accuracy relative to experimental data.This is partly because of the nature of slug flow pneumatic conveying system,which,as a dynamic system,never becomes stable.By utilising conservation of mass (airflow),a dynamic pressure analysis model is proposed on the basis of the derivative of the upstream pressure behaviour.The rate of air permeation through slug,one of the important factors in the conservation model,is expressed as a function of a slug permeability factor.Other factors such as slug velocity,slug length and the fraction of stationary layer were also considered.Several test materials were conveyed in single-slug tests to verify the proposed pressure drop model,showing good agreement between the model and experimental results.     

Transient Heat and Moisture Flow Around Heat Source Buried in an Unsaturated Half Space

This article presents solutions for the transient heat and moisture transport due to both disk heat source and cylindrical heat source buried in an unsaturated half space. The solutions are presented in Hankel–Laplace transform domain and in dimensionless style. Coupled effect of thermally driven moisture transport is especially investigated because of its importance to alter the flow field in low-permeability medium. Parametric study has been performed to assess the effects of five independent dimensionless parameters on flow field. The stability and accuracy of the present solutions are demonstrated from the comparison between the results obtained from these solutions and those by using a well-established finite element code CODE_BRIGHT. Despite the simplified assumptions required in order to obtain analytical solutions in Hankel–Laplace transform domain, the results incorporate the main mechanisms involved in the coupled thermo-hydraulic (T-H) problem, and they may be eventually used for validation purposes.     

A New Technique to Determine Horizontal and Vertical Permeabilities from the Time-Delayed Response of a Vertical Interference Test

To determine the permeabilities from a vertical interference test, earlier investigators proposed correlations or type curves based on point source solutions or partially penetrated well solutions. However, it is impossible for these correlations or type curves to cover all possible scenarios in the real world. In more recent years, people use regression analysis to simultaneously match the pressure responses at the source interval and the observation point. With regression analysis, we face the problem of non-unique solutions. Sometimes, estimated permeability could be outside a reasonable range when analyzing noisy data from real tests. In this paper, a new technique is presented to estimate horizontal and vertical permeabilities from the time-delayed response in a wireline vertical interference test. In a vertical test, a pressure drawdown test period is followed by a pressure buildup test period. Because of the delay in response, the pressure at the observation probe continues to drop for some time while the pressure at the source interval is being built up. The maximum pressure drop at the observation probe with regard to the maximum pressure drop in the source interval is time-delayed. Using this time delay and the maximum pressure drop at the observation probe, vertical and horizontal permeabilities can be estimated. A novel numerical scheme is used. The new technique is compared with the previous methods, and it shows its superiority in accuracy. In addition, it can be used in different test configurations. Application issues in real testing conditions are discussed. Finally, two field tests are analyzed using this technique, while an earlier effort to analyze the tests using a conventional method was not successful due to poor data quality.     

Permeability control in electro‐sensitive microcapsules with immobilized ferroelectric liquid crystalline segments

Nylon‐polystyrene microcapsules with immobilized ferroelectric liquid crystalline segments were prepared, and permeability control of an encapsulated core material was investigated under an external electric field. A ferroelectric liquid crystal monomer possessing both mesogenicity and chirality responded effectively to the external electrical field. Permeation of the material (oxprenolol) contained in the inner aqueous core of the microcapsules was enhanced under a weak electric field (2 V). Furthermore, the permeability of oxprenolol did not depend on the external electric field in the absence of the ferroelectric liquid crystal segments. To clarify the controlled‐release mechanism of the core material, the light transmittance of the polymer membranes was quantitatively evaluated under an external electric field using a handmade polarized light transmittance apparatus. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1749–1757, 2008     

Correlation Between Structure and Transport Properties of Polymeric Membranes for Immunoisolation

Laboratory-made asymmetric polyurethane membranes designed for immunoisolation were investigated. Two types of EK and ES membranes were prepared in different spinning conditions. The membrane structure was characterised by the skin pore radius measurements using differential scanning calorimetry (DSC). Diffusive transport properties of membranes were determined by in vitro method for albumin and creatinine. The scanning electron microscopy (SEM) was applied to study the morphology of membranes. It has been found that the DSC technique is a useful tool for the evaluation of pore radii in the skin layer for PU membranes. Calculated pore radii were in the range from 1.95 to 2.47 nm for the EK and ES types. A correlation between the skin pore radii and the transport properties was not found in this case of investigated membranes. However, the transport properties data can serve for the estimation of selectivity of membranes. Thus, the selectivity of membranes for solutes of various molecular size was estimated from the D _m/D _w ratio of diffusion coefficients for albumin and creatinine. The SEM micrographs reveal the finger-like internal structure of capillary membranes, as well as various skin thickness. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effective Permeabilities in a Porous Medium with Log-Stable Statistics

Equations for the effective coefficients of random permeability fields for fluid flow through a porous medium with log-stable distributions are derived using the Wilson renormalization group approach. Results of the theoretical modeling are compared with data of numerical modeling. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 6, pp. 146–158, November–December, 2005.     

破碎岩石渗透性的试验测定方法

传统的试验仪器和方法仅能测试岩石破坏前的渗透系数，文中介绍了一种自行设计并已获国家专利的破碎岩石压实渗透仪，依靠其与MTS815.02岩石力学伺服系统连接匹配。利用MTS的两套闭环系统施加轴压和孔压，可测试压力作用下岩石破碎后的渗透系数，对破碎砂岩进行高压下的渗透测试进一步说明该方法的可行性。利用该方法得出的测试结果。对破碎岩体中渗流问题研究及灾害防治具有参考价值。