破碎岩石渗透性的试验测定方法

传统的试验仪器和方法仅能测试岩石破坏前的渗透系数，文中介绍了一种自行设计并已获国家专利的破碎岩石压实渗透仪，依靠其与MTS815.02岩石力学伺服系统连接匹配。利用MTS的两套闭环系统施加轴压和孔压，可测试压力作用下岩石破碎后的渗透系数，对破碎砂岩进行高压下的渗透测试进一步说明该方法的可行性。利用该方法得出的测试结果。对破碎岩体中渗流问题研究及灾害防治具有参考价值。     

Percolation theory approach to transport phenomena in porous media

The percolation theory approach to static and dynamic properties of the single- and two-phase fluid flow in porous media is described. Using percolation cluster scaling laws, one can obtain functional relations between the saturation fraction of a given phase and the capillary pressure, the relative permeability, and the dispersion coefficient, in drainage and imbibition processes. In addition, the scale dependency of the transport coefficient is shown to be an outcome of the fractal nature of pore space and of the random flow pattern of the fluids or contaminant.     

Sulfonated poly(ether ether ketone)-based silica nanocomposite membranes for direct ethanol fuel cells

This paper reports on the preparation and characterization of sulfonated poly(ether ether ketone) (sPEEK)-based mixed matrix membranes. The inorganic matrix consisted of silica: Aerosil^®380, tetraethoxysilane (TEOS) or a combination of both to obtain an interconnected silica network. The behavior of these membranes in ethanol–water systems was studied for application in a direct ethanol fuel cell (DEFC). Uptake measurements showed that the converted TEOS content had a strong influence on the hydrophilicity of the membranes. Proton conductivity was strongly related to the water content in the membrane, but the proton diffusion coefficients of membranes with various Aerosil^®380–TEOS combinations were similar. Dynamic measurements in liquid–liquid (L–L) and liquid–gas (L–G) systems were performed to study the ethanol transport through the membrane. No reduction in ethanol permeability was obtained in the L–L system, but a remarkable reduction was obtained in the L–G system when 2 M ethanol was applied. The reinforcing characteristic of the combined Aerosil^®380–TEOS-system were best observed at 40 °C with 4 M ethanol. The fuel cell performance prediction based on the selectivity of proton diffusion coefficient to ethanol permeability coefficient showed for nearly all composite membranes an improvement with respect to the polymeric reference. The presence of an inorganic phase led to relatively constant proton diffusion coefficients and lower ethanol permeability coefficients in comparison with the polymeric reference.     

Fabrication and electromagnetic wave absorption properties of amorphous Ni-P nanotubes

Amorphous Ni-P nanotubes are fabricated through electroless chemical deposition inside an anodic aluminum oxide template. The hysteresis loops of Ni-P nanotube arrays are each found to exhibit an unusual isotropic behaviour, which is believed to be due to the competition results between the shape anisotropy and the magnetostatic interaction among nanotubes. The dynamic dependence of permittivity on the frequency spectrum is fitted to the Lorentzian-type dispersion law. The permeability dispersion behaviours have been fitted based on the Kittel equation. Electromagnetic wave absorption properties of Ni-P nanotubes/paraffin composites with different values of thickness (t) are clearly shown by a three-dimensional graph. Furthermore, the bandwidths of composites with different "t" values can be well presented by a two-dimensional contour graph, which is a novel presentation form. The results show that the composites each have a good microwave absorption performance with t larger than 5.5 mm and with the frequency around 8 gigahertz.     

具有横向磁晶各向异性的钴纳米线的微波吸收性能

使用电化学脉冲沉积法制备了磁晶各向异性易磁化方向(c轴)垂直纳米线长轴方向的钴纳米线.受到磁晶各向异性、静磁相互作用等因素与形状各向异性相互竞争的结果,纳米线阵列的磁滞回线显示出较弱的磁各向异性.此外,在2—18 GHz频率范围内,纳米线/石蜡复合材料的介电色散谱的虚部在5 GHz处有一个主峰,在10 GHz附近有一个较弱的峰;德拜弛豫特性和材料的电导率对这两个峰的形成均有贡献.同时,其磁导率色散谱的虚部在频率为6.1 GHz处有一个主峰,在10 GHz以上有两个较微弱的峰. 前一个峰源于自 关键词： 钴纳米线 介电色散谱 磁导率色散谱 微波吸收剂     

基于高介电常数基板和金属结构负折射材料的设计,仿真与验证

通过将单回路镜像对称开口金属环结构印制在高介电常数基板上,实现了一种金属含量比传统负折射材料更少,"双负"通带比全介质负折射材料更宽的负折射材料.分析了高介电常数基板产生负介电常数以及"双负"通带形成的机理,通过仿真实验分析了影响"双负"通带的因素.通过制作样品验证了这一机理实现"双负"的可行性,理论分析与实验结果都表明这种方法可实现较宽频段内的"双负"通带. 关键词： 负折射材料 负介电常数 负磁导率 介质谐振器原理     

Effect of surface oxidation on the surface condition and deuterium permeability of a palladium membrane

Oxidation and deoxidation of a Pd membrane was conducted in a quartz tube oven in a temperature range of 23-500 °C. The micromorphology and chemical composition of the Pd membrane surface was characterized using scanning electronic microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Micropores and PdO began to form on the Pd membrane surface after oxidation at 240 °C for 1 h and their quantity increased gradually with increasing temperature. A rough Pd membrane surface was obtained when the temperature rose to 500 °C. The PdO on the Pd membrane surface was completely deoxidized once more using H₂ at room temperature, but the rough surface morphology caused by oxidation remained. The deuterium permeability of the Pd membrane was tested using special equipment in the China National Key Laboratory and the results indicated that the rough Pd membrane surface had higher deuterium permeability than the original membrane. The improved deuterium permeability could be attributed to the higher Pd membrane surface area, which provided deuterium atoms with more adsorption sites and dissociation sites.     

Nondestructive evaluation for remanent life of modified 9Cr-1Mo steel by reversible magnetic permeability

We present a magnetic and nondestructive method to evaluate the remanent life of modified 9Cr-1Mo steel by measuring the reversible magnetic permeability. Specimens with ten different kinds of aging periods were prepared using an isothermal heat treatment at 690 °C. The Larson-Miller parameter (LMP) was calculated and the peak interval of reversible magnetic permeability (PIRMP) was measured using the surface type probe. PIRMP was inversely proportional to LMP. We can evaluate the remanent life of modified 9Cr-1Mo steel using the relationship between PIRMP and LMP. Also, we present the possibility that the tensile strength and yield strength measured by destructive methods could be estimated by PIRMP measured nondestructively.     

Frequency dispersive complex permittivity and permeability of ferromagnetic metallic granular composite at microwave frequencies

We experimentally studied the frequency dependent complex permittivity ε and permeability μ of composite composed of carbonyl iron powder (CIP) and epoxy resin in the frequency range 1-18 GHz. We found that the intrinsic ε and μ of CIP extracted from the measured ε and μ of composites follow the classical Maxwell equations and the Landau-Lifshitz-Gilbert (LLG) equation, respectively. The dependences of ε and μ of composites on the volume fraction of CIP (vf_CIP) were investigated using the two-exponent phenomenological percolation equation (TEPPE). We found that the TEPPE can fit the experimental results very well. Comparing the results of percolation parameters derived by experimental data at different frequencies, we show that the TEPPE is frequency independent for the composites at microwave frequencies. The results also show that the ε and μ spectrums of composites with definite vf_CIP can be correctly calculated by combining the TEPPE with the theoretical models of intrinsic ε and μ.     

Steady flow in a deformable porous medium

A nonlinear model for a steady flow in a deformable porous medium is considered. The flow is governed by the poroelasticity system consisting of an elasticity equation for the displacement of the porous medium and Darcy's equation for the pressure in the fluid. This poroelasticity system is nonlinear when the permeability in Darcy's equation is assumed to depend on the dilatation of the porous medium. Existence and uniqueness of a weak solution of this poroelasticity system is established under rather weak assumptions on the regularity of the data. Convergence of a finite element approximation is proved and verified through numerical experiments. Copyright © 2013 John Wiley & Sons, Ltd.