Microstructural evolution during oxidative ablation in air for polyacrylonitrile based carbon fibers with different graphite degrees

Polyacrylonitrile‐based carbon fibers with different graphite degrees were oxidative ablated at 500 and 600 °C in air. By Thermal gravimetric (TG), Raman spectroscopy, X‐ray diffraction, and SEM, the mass loss, microstructure, and surface morphology of carbon fibers were investigated. The mass loss of carbon fiber increases linearly with increasing oxidative ablated time under 500 and 600 °C. The carbon fiber with higher graphite degree shows higher oxidative resistance, and the surface roughness increases gradually because of chemical ablation during the whole oxidation. A gloss morphology appears on the surface primarily because of physical denudation for carbon fibers with lower graphite degree and then burn off according to carbon and oxygen reaction. The crystallite size (La) decreases significantly, while interlayer spacing(d₀₀₂) remains nearly unchanged. SEM observation suggests the two kinds of ablation mechanisms for carbon fibers with different graphite degrees indicating that CC band in sp³ hybridization prefers to be attacked by oxygen molecule more than that in sp² hybridization during oxidation ablation in air. Copyright © 2012 John Wiley & Sons, Ltd.     

Microstructures of Aqueous Two‐Phase Systems Formed by Mixture of Polymer and Cationic‐Anionic Surfactants

Microstructure and phase behavior of decyltriethylammonium bromide (C₁₀NE)/sodium decylsulfonate (C₁₀SO₃)/poly(ethylene oxide) (PEO)/water quaternary systems were studied by freeze‐fracture transmission electron microscopy, small angle X‐ray diffraction, and dynamic light scattering methods. Aqueous two‐phase systems (ATPS) could be prepared by properly mixing the aqueous solution of PEO and equimolar mixed C₁₀NE and C₁₀SO₃. It was shown that the top phase of the ATPS was surfactant‐enriched and mainly composed of multi‐lamellar structure, while the bottom phase of the ATPS was polymer‐enriched in which some vesicles were observed.     

Effect of the Spherical Silica Surface on the Photoluminescence of the Loaded CdS Nanoparticles

CdS nanoparticles were formed on the surface of silica microspheres by the improved layer‐by‐layer self‐assembled technique. High‐resolution electron microscope (HRTEM) image and energy dispersive x‐ray analysis (EDX) confirmed formation of a quasi‐continuous CdS nanoparticles film on the silica microspheres. The results of UV‐vis and fluorescence spectra display that the spherical silica surface has a great effect on the photoluminescence of the loaded CdS nanoparticles. In contrast to the CdS nanoparticles powder, the composite can exhibit the emission ascribed to the band gap transition when the CdS nanoparticles film is relatively thick. This phenomenon is probably due to an enhancement of the crystallinity of CdS nanoparticles induced by the silica spheres.     

New symmetric azomethinic dimer: the influence of structural heterogeneity on the liquid crystalline behaviour

The paper deals with the study of the thermotropic liquid crystalline properties of a new azomethinic symmetric dimer and some of its structural heterogeneous mixtures with one of its reagents. Their thermotropic behaviour was monitored by polarised light microscopy, differential scanning microscopy and variable temperature X-ray diffraction measurements. The influence of the structural heterogeneity on the mesomorphic behaviour was established and some similarities with the mesomorphic behaviour of the polydisperse polymers were underlined.     

Ferroelectric smectic meso-phase formed by banana-shaped achiral liquid crystals

A new banana-shaped achiral molecule, 1,3-phenylene bis[4-(3-chloro-4-n-octyloxyphenyliminomethyl)benzoate] (PBCOB) has been synthesized, and its ferroelectric properties and homeotropic alignment investigated. The presence of a lateral chloro-substituent in the Schiff 's base moiety prevents the regular stacking of molecules and results in lowering the transition temperature and the degree of crystallinity of the switchable banana phase. Their smectic mesophases, including a switchable banana phase B₇, were characterized by differential scanning calorimetry, X-ray scattering and polarizing optical microscopy. Both the left- and right-handed helical domains are spontaneously formed upon cooling from the isotropic liquid to the switchable banana phase B₇. By X-ray study, the smectic phases showed a layer spacing of 38.1 Å, compatible with the end-to-end distance of the molecule with a bent conformation. Significantly, the smectic B7 phase exhibited a periodicity of 292 Å that corresponds to a helical structure with periodicity about 7.5 times 38.1 Å. The spontaneous polarization for PBCOB is about 50 nCcm^-2 and shows a temperature dependence. The ferroelectric lyomesophase of PBCOB showed a ferroelectric electro-optical switching range extending more than 50°C, switchable at room temperature.     

Comparative study on structure and properties of titanium/silicon mono‐ and co‐doped amorphous carbon films deposited by mid‐frequency magnetron sputtering

The titanium/silicon mono‐ and co‐doped amorphous carbon films were deposited by mid‐frequency magnetron sputtering Ti target, Si target, and Ti80S20 alloy target, respectively. The effects of doped elements on the composition, surface morphology, microstructure, and mechanical and tribological properties of the films were investigated. The results reveal that the ratio of sp³ and sp² carbon bonds of the films is regulated between 0.28 and 0.62 by a combination of Ti and Si dopant. The addition of small amounts of silicon leads to an increase in sp³ bonds and disorder degree of the sp² carbon. The co‐doped film exhibits significantly superior friction performance than the mono‐doped films. The ultra‐low friction (μ < 0.01) was achieved under a load of 2 N in ambient air with 40% RH. By comparing to the mono‐and co‐doped films, it is thought that the sp³/sp² ratio of the films may play a key role for the superlow friction. Copyright © 2013 John Wiley & Sons, Ltd.     

摩擦点火Ti-V-Cr阻燃钛合金燃烧产物的组织特征

采用摩擦氧浓度实验方法, 结合原位观察、扫描电镜、能谱仪和X-射线衍射分析, 系统研究Ti-V-Cr 阻燃钛合金燃烧产物的微观组织形貌、燃烧反应过程的合金元素分布规律及微观机理. 结果表明: Ti-V-Cr 阻燃钛合金燃烧过程发出闪亮耀眼的白光, 具有典型金属燃烧的火焰特征. 燃烧产物主要有TiO₂, V₂O₅和Cr₂O₃三种氧化物, 该混合氧化物以分散颗粒和致密连续体存在. 分散颗粒为规则的球形; 致密连续燃烧产物的微观组织具有分区特征, 从合金基体至燃烧表面依次为过渡区、热影响区、熔凝区和燃烧区. 其中, 过渡区存在一些微小的颗粒状凸起, 且有一定方向性; 热影响区中形成大量V基固溶体相和少量的Ti基固溶体相, V基固溶体相上存在Ti的含量远高于基体的针状析出物; 熔凝区中, 大量的Ti基固溶体中存在少量的V基固溶体; 燃烧区主要为Ti, V和Cr的氧化物混合物. 热影响区的V基固溶体相降低了Ti元素向熔凝区的迁移速率, 减慢了燃烧区Ti与O的优先反应; 燃烧区形成的TiO₂, V₂O₅和Cr₂O₃混合氧化物和熔凝区O在Ti中大量固溶共同终止了O向合金基体的继续扩散, 从而使Ti-V-Cr阻燃钛合金表现出优异的阻燃功能性.     

一种牧场配料系统的设计与实现

提出了一种应用于移动Ad Hoc网络的分布式资源接纳控制机制,在目的节点和中间节点部署不同的资源接纳控制模块,能以接近通话或者分组传输的时间间隔适应网络的动态变化,为业务提供较好的QoS保障,并且能够支持多播及接收者异质性。仿真结果表明,添加资源接纳控制机制后,时延、抖动及丢包率分别降低了25.75%,51.76%和24.15%。