Effect of cooling rate in [(Fe0.5Co0.5)0.75B0.2Si0.05]100-xNbx alloy system on magnetic properties

The effect of cooling rate on the thermal stability and soft magnetic properties of [(Fe_0.5Co_0.5)_0.75B_0.2Si_0.05]_100-xNb_x (x = 5, 6, 7, 8 at. %) system was investigated. The alloys were produced into the form of ribbon and cylindrical rod by melt-spinning and injection casting, respectively. Their structure, thermal, mechanical and soft magnetic properties were investigated by x-ray diffraction, differential scanning calorimetry, universal testing machine and vibrating sample magnetometer, respectively. All of the alloys were identified as fully amorphous by X-ray diffraction. It turned out that the rod samples had exceptionally high saturation fields reaching 3.0 kOe, which is key properties for sensor application. Also, among these Fe,Co-based samples, the Fe_35.25 Co_35.25 B_18.8 Si_4.70 Nb₆ ribbon exhibits the highest saturation magnetization with 142.1 emu/g.     

A 24-GHz Patch Array with a Power Amplifier/Low-Noise Amplifier MMIC

This paper presents an active patch array designed at 24 GHz. It can be used as a front-end component for a phased array. A series resonant array structure is chosen which is compact and easy excite. With 5 elements, the array proved a 12-dB antenna gain. A power amplifier and a low noise amplifier are designed on a single GaAs chip (PALNA). Bias switch is used in the PALNA, which greatly reduces the switch loss in a transceiver and increases the efficiency. 20-dB small signal gain is achieved in both power amplifier and low noise amplifier. The active patch array is built by the combination of the patch array and PALNA. The measured active gain of this antenna is 35-dB for the PA mode and 31-dB for the LNA mode. This active patch array can obtain an EIRP of 34 dBm with a total radiated power of 22dBm and a maximum PAE of 32%. To check the noise performance, we applied sources at both normal temperature and 77K (liquid nitrogen) and extracted the noise figure (3.5 dB) of the active antenna by the Y factor method. The results proved that the active antenna is working efficiently as both a transmitting and receiving antenna.     

HL-1M装置等离子体与ICRH发射天线的相互作用

ICRH实验的一个比较突出的问题就是杂质。杂质的产生与ICRH发射天线同等离子体的相互作用和RF脉冲的发射有着不可忽视的联系。对HL－1M装置的ICRH发射天线在两年多实验中的变化作了简要的介绍和讨论，并对今后ICRH发射天线的设计提出了一些建议。     

一种基于运动式发射天线的光学接收天线设计

设计一款应用于多发射天线多接收天线自由空间激光通信系统中的折射式光学接收天线。天线焦距120.02 mm,相对孔径1∶1.13,工作波长为850 nm,波长范围覆盖820 nm ~880 nm,在50 lp/mm频率处0视场的MTF为0.5。接收天线可以在发射天线移动48 mm范围内利用光敏面直径为0.5 mm的雪崩光电二极管（APD）接收3 mrad发散角的光信号。该天线由两组、共4片球面透镜组成,结构简单,可实现对运动式发射天线的光信号的接收。     

基于吸聚一体的低散射传输型透镜设计

通过传输型超表面透镜与电路模拟雷达波吸收器的集成设计,提出了一种兼具透射波前变换与带外雷达散射截面减缩特性的微波复合材料设计方法。透镜采用亚波长分布的周期性单元,由梯度相位补偿对透射波进行调节,进而获得平面波前与球面波前之间的互易变换。并且,使用透镜在波前变换频带以外低频端的反射特征,结合单个有耗层设计,构造了电路模拟吸波器。选用一副缝隙耦合馈电的微带贴片天线单元作为初级馈源天线,观察到复合材料的波前变换特性可在宽频带范围内产生主瓣增益增强效果。与透镜相比,电路模拟吸波器的引入使得复合材料针对TE与TM极化分别可在130.68%与155.11%的频率范围内获得雷达散射截面减缩效果。通过全波模拟和实验测量,验证了辐射增益增强与雷达散射截面减缩效果,表明了复合材料吸聚一体设计的有效性。     

Notch fatigue of Cu_(50)Zr_(50) metallic glasses under cyclic loading: molecular dynamics simulations

Molecular dynamics simulation is performed to simulate the tension–compression fatigue of notched metallic glasses(MGs), and the notch effect of MGs is explored. The notches will accelerate the accumulation of shear transition zones, leading to faster shear banding around the notches' root causing it to undergo severe plastic deformation. Furthermore, a qualitative investigation of the notched MGs demonstrates that fatigue life gradually becomes shorter with the increase in sharpness until it reaches a critical scale. The fatigue performance of blunt notches is stronger than that of sharp notches. Making the notches blunter can improve the fatigue life of MGs.     

双金属/TiO2纳米管复合结构中增强的光电流

将传统半导体材料与金属微纳结构相结合,利用其表面等离激元共振效应,可有效地增强复合结构的光电转换效率,使其广泛地被用于光电化学和光电探测等领域.本文以氧化铝纳米管为模板,采用原子层沉积技术制备出高有序的TiO2纳米管,并通过电子束热蒸发技术在大孔径的纳米管薄膜中分别负载金、铝和双金属金/铝纳米颗粒,形成金属纳米颗粒/T...     

主三镜一体化离轴三反光学天线设计

为提高空间激光通信离轴三反光学天线的装调效率,需要对反射镜总的装调自由度进行优化设计。基于共轴三反无焦系统的设计原理,提出一种主三镜一体化的设计方法,并推导了光学系统结构参数之间的关系,利用Zemax光学软件设计了一种结构紧凑、主三镜一体化的离轴三反光学天线。设计结果表明:全视场光学像质优于衍射极限,主镜和三镜空间位置相接近,可共母板加工和面形共基准检测,为主三镜的一体化加工提供了方法。光学天线的装调自由度减少了6个,降低了装调难度,提高了装调效率。     

超越SNOM探针通光孔径尺寸的金属纳米间隙超分辨测量

采用电磁场有限元方法,数值模拟了孔径型扫描近场光学显微镜(aperture Scanning Near-field Optical Microscopy,a-SNOM)在照明模式下的工作过程.针对金偶极天线结构,改变天线长度和纳米间隙尺寸,计算了a-SNOM探针孔径的远场辐射速率随探针端面中心坐标变化的扫描曲线,实现了超越a-SNOM探针通光孔径尺寸的天线金属纳米间隙的超分辨测量,对于100nm通光孔径的探针,可分辨最小尺寸为10nm(0.016倍波长)的金属间隙.通过对比金属和介质偶极天线的a-SNOM探针远场辐射速率测量的计算结果,表明天线金属纳米间隙的超分辨测量的实现是由于金属间隙表面等离激元的激发.     

光电导天线太赫兹辐射峰值调控研究

针对微结构光电导天线与飞秒激光之间相互作用效应以及辐射太赫兹波调控问题进行了研究。采用德鲁德-洛伦兹理论模型获得微结构光电导天线辐射光电流密度,通过时域有限差分把光电流密度迭代在激励网格上,结合麦克斯韦方程求解时变电磁场,并通过传输线格林函数获得多层介质近场到远场的辐射太赫兹波,建立了辐射光电流与辐射阻抗、电磁共振模式之间的关系模型,模拟仿真分析了微结构S型光电导天线太赫兹波辐射调控机理。研究结果表明：微结构改变了天线等效模型的辐射阻抗;同时得知耦合系数不为零时存在耦合作用,且随着耦合系数增大共振频率峰值发生辐射增强和位移;并通过设计S型光电导天线获得辐射峰值频率调整范围为0.50～0.80 THz之间,对比工形天线辐射峰值频率由原来的0.40 T移动到0.76 T,频率调整度75%,峰值辐射效率约提高70%。该研究工作为后续高功率光导天线太赫兹波辐射的共振中心频点以及结构设计奠定重要基础。