RoHS检测用X荧光光谱仪校准方法的初探

对RoHS检测用X荧光光谱仪提出了计量性能要求及校准方法,并验证了方法的可行性,为今后规程的制定提供参考。     

浅谈电子天平的选择和使用

针对电子天平的选择、使用和维护中容易忽视的问题进行分析和阐述,并提出了解决办法和正确的操作规程。     

校准蒸发光散射检测器选用标准物质的比较与分析

通过对葡萄糖和三氯蔗糖的物理、化学性质的比较,采用高效液相色谱仪和蒸发光散射检测器进行标准溶液色谱峰面积的检测,并用G rubbs检验法对其数据进行异常值检验。结果表明,三氯蔗糖相对于葡萄糖较为稳定,选用三氯蔗糖作为蒸发光检测器校准用标准物质比较合适。     

Heteroscedastic controlled calibration model applied to analytical chemistry

In chemical analyses performed by laboratories, one faces the problem of determining the concentration of a chemical element in a sample. In practice, one deals with the problem using the so‐called linear calibration model, which considers that the errors associated with the independent variables are negligible compared with the former variable. In this work, a new linear calibration model is proposed assuming that the independent variables are subject to heteroscedastic measurement errors. A simulation study is carried out in order to verify some properties of the estimators derived for the new model and it is also considered the usual calibration model to compare it with the new approach. Three applications are considered to verify the performance of the new approach. Copyright © 2010 John Wiley & Sons, Ltd.     

Quantitative analysis of levodopa, carbidopa and methyldopa in human plasma samples using HPLC-DAD combined with second-order calibration based on alternating trilinear decomposition algorithm

An HPLC method combined with second-order calibration based on alternating trilinear decomposition (ATLD) algorithm has been developed for the quantitative analysis of levodopa (LVD), carbidopa (CBD) and methyldopa (MTD) in human plasma samples. Prior to the analysis of the analytes by ATLD algorithm, three time regions of chromatograms were selected purposely for each analyte to avoid serious collinearity. Although the spectra of these analytes were similar and interferents coeluted with the analytes studied in biological samples, good recoveries of the analytes could be obtained with HPLC-DAD coupled with second-order calibration based on ATLD algorithm, additional benefits are decreasing times of analysis and less solvent consumption. The average recoveries achieved from ATLD with the factor number of 3 (N = 3) were 100.1 ± 2.1, 96.8 ± 1.7 and 104.2 ± 2.6% for LVD, CBD and MTD, respectively. In addition, elliptical joint confidence region (EJCR) tests as well as figures of merit (FOM) were employed to evaluate the accuracy of the method.     

Quantitative analysis of triazine herbicides in environmental samples by using high performance liquid chromatography and diode array detection combined with second-order calibration based on an alternating penalty trilinear decomposition algorithm

A novel application of second-order calibration method based on an alternating penalty trilinear decomposition (APTLD) algorithm is presented to treat the data from high performance liquid chromatography-diode array detection (HPLC-DAD). The method makes it possible to accurately and reliably analyze atrazine (ATR), ametryn (AME) and prometryne (PRO) contents in soil, river sediment and wastewater samples. Satisfactory results are obtained although the elution and spectral profiles of the analytes are heavily overlapped with the background in environmental samples. The obtained average recoveries for ATR, AME and PRO are 99.7 ± 1.5, 98.4 ± 4.7 and 97.0 ± 4.4% in soil samples, 100.1 ± 3.2, 100.7 ± 3.4 and 96.4 ± 3.8% in river sediment samples, and 100.1 ± 3.5, 101.8 ± 4.2 and 101.4 ± 3.6% in wastewater samples, respectively. Furthermore, the accuracy and precision of the proposed method are evaluated with the elliptical joint confidence region (EJCR) test. It lights a new avenue to determine quantitatively herbicides in environmental samples with a simple pretreatment procedure and provides the scientific basis for an improved environment management through a better understanding of the wastewater-soil-river sediment system as a whole.     

Static SIMS–VAMAS interlaboratory study for intensity repeatability,mass scale accuracy and relative quantification

An interlaboratory study involving 19 time‐of‐flight static secondary ion mass spectrometer (TOF‐SSIMS) instruments from 12 countries has been conducted. Analysts were supplied, by the National Physical Laboratory, with a protocol for analysis together with three reference materials: poly(tetrafluoroethylene), a thin layer of polycarbonate on a silicon wafer and a patterned sample with different amounts of Irganox 1010 in each of four quadrants on a silicon wafer. The objectives of the study are (i) to determine the repeatability and constancy of the relative intensity scale achievable using the draft ISO standard (DIS 23830), (ii) to evaluate the effectiveness of mass scale calibration and optimisation procedure and (iii) to evaluate the current capability of relative quantification using SSIMS. The results of this study show that the constancy of the relative intensity scale has an approximate scatter standard deviation of only 5%. This is excellent and demonstrates that SSIMS measurements are significantly more stable than often thought by analysts. The draft ISO standard (DIS) CD 13084 for calibration of the mass scale in TOF‐SIMS was evaluated and found to be consistent with our previous study. Four laboratories optimised the instrument mass calibration accuracy using this procedure leading to improvements in mass scale calibration by factors of 1.8, 2.2, 2.3 and 8.6. Using a novel patterned Irganox sample it is shown that the precision of relative quantification may be as good as a standard deviation of only 5% for 16 instruments—this is a remarkable result. Further work is required to develop more robust reference materials. © Crown copyright 2010. Reproduced with the permission of Her Majesty's Stationery Office. Published by John Wiley & Sons, Ltd.     

Matrix-free analysis of aflatoxins in pistachio nuts using parallel factor modeling of liquid chromatography diode-array detection data

In the present study a second-order calibration strategy for high performance liquid chromatography with diode-array detection (HPLC-DAD) has been developed using parallel factor analysis (PARAFAC) and has been applied for simultaneous determination of aflatoxins B₁, B₂, G₁ and G₂ in pistachio nuts in the presence of matrix interferences. Sample preparation was based on solvent extraction (SE) followed by solid phase extraction (SPE) on Bond Elut C18 cartridges. Since the sample preparation procedure was not selective to the analytes of interest, exploiting second-order advantage to obtain concentrations of individual analytes in the presence of uncalibrated interfering compounds seemed necessary. Appropriate pre-processing steps have been applied to correct background signals and the effect of retention time shifts. Transferred calibration data set obtained from standardization of solvent based calibration data has been used in prediction step. The results of PARAFAC on a set of spiked and naturally contaminated pistachio nuts indicated that the four aflatoxins could be successfully determined. The method was validated and multivariate analytical figures of merit were calculated. The advantages of the proposed method are using a low-cost SPE step relative to standard method of aflatoxin analysis (immune affinity column assay), a unique and simple isocratic elution program for all samples and a calibration transfer for saving both chemicals and time of analysis. This study show that coupling of SPE-HPLC-DAD with PARAFAC as a powerful second-order calibration method can be considered as an alternative method for resolution and quantification of aflatoxins in the presence of unknown interferences obtained through analysis of highly complex matrix of pistachio samples and cost per analysis can be reduced significantly.     

血糖近红外光谱分析的Savitzky-Golay平滑模式与偏最小二乘法因子数的联合优选

利用偏最小二乘法(PLS)和光谱Savitzky-Golay(SG)平滑方法,建立血清葡萄糖近红外光谱分析的优化模型。基于最优单波数模型的预测效果,提出划分校正集和验证集的一种新方法。采用10000～5300cm-1和4920～4160cm-1的组合波段,光谱经过SG平滑处理,利用PLS方法建立定标预测模型。将平滑点数扩充为5,7,…,87(奇数),多项式次数扩充为n=2,3,4,5,6,得到包含582个平滑模式的14个平滑系数表。对所有平滑模式和PLS因子数(1～40)分别建立PLS模型。按照预测效果进行优选,得到最优SG平滑模式为1阶导数平滑,3、4次多项式类型,SG平滑点数为53,最优PLS因子数为7,最优RMSEP达到0.376mmol/L。所采用的划分校正集和验证集的方法、SG平滑模式的扩充、SG平滑模式和PLS因子数的联合大范围筛选能够有效地应用于近红外光谱分析的模型优化。     

Calibration of a multiple axes 3-D laser scanning system consisting of robot, portable laser scanner and turntable

A multiple axes 3-D laser scanning system consisting of a portable 3-D laser scanner, a industrial robot and a turntable is demonstrated. By using a criterion sphere, a robot tool center point (TCP) calibration approach is proposed to calibrate the relation between the laser 3-D scanner and the robot end-effector. In this approach, two different translational motions of robot are first made to determine the rotation part, and then at least three different rotational motions are made to determine the translation part. Meanwhile, by using the criterion sphere, a turntable approach is proposed to calibrate the pose of the turntable relative to the robot. In this approach, several rotational angles of turntable and two different heights of the sphere are made to determine the rotational axis of turntable. Experiment is performed on a portable laser scanner mounted on an industrial robot ABB IRB4400 with a turntable. The experiment results show that the two proposed calibration algorithms are stable and flexible. The application of 3-D measurement is also given to demonstrate the effectiveness and stability of the multiple axes 3-D laser scanning system.