Multi-cracks problem for piezoelectric materials strip subjected to dynamic loading

This paper analyses and models the dynamic interaction among permeable multi-cracks in a piezoelectric strip under anti-plane shear waves by the Schmidt method. The Fourier transform is applied and then two pairs of triple integral equations can be solved using the Schmidt method. The results show that the stress and the electric displacement intensity factors of cracks depend on not only the crack length and the piezoelectric coefficient, but also the thickness of the piezoelectric strip, the distance between multi-cracks and the frequency of incident wave.     

改性壳聚精膜用于醇水混合液分离的研究──Ⅲ．超细粉末填充壳聚精膜

首次制备了用Ｓｉ３Ｎ４，ＳｉＯ２，ＴｉＨ４超细粉末填充的改性壳聚精膜，并将其用于乙醇／水混合液的分离中。实验表明壳聚糖膜经超细粉末填充后强度增大，溶胀度减小。用于乙醇／水混合液渗透蒸发分离时，分离因子和渗透通量都有提高，并在填充量为１６．７％附近出现极大值。随着料液中乙醇含量的增大，渗透通量减小，分离因子增大；随着料液温度的升高渗透通量显著增大，分离因子则稍有下降。并简单讨论了超细粉末在乙醇／水混合液分离中的作用。     

Carbon–epoxy composites based on fibers coated with nylon 6,6: hygrothermal ageing versus interlaminar shear strength

Carbon fibers were coated in situ with a thin film of polyhexamethylene adipamide by an interfacial polycondensation technique. The modified fibers were used for the preparation of epoxy-based unidirectional composites. Specimens of these materials were immersed in water until equilibrium conditions were attained. The weight gain at equilibrium was determined as a function of the immersion temperature, the fiber volume fraction and the polyamide content deposited on the fibers. Water penetration in specimens made with uncoated carbon fibers increases when the volume fraction decreases. Introduction of the polyamide interlayer initially increases the water absorption, but reduces it at higher immersion temperatures and/or higher polyamide contents. The treated specimens were subjected to the short beam test to determine the interlaminar shear strength (ILSS). The data show that the ILSS decreases with water penetration but increases when the immersion temperature increases from 40 to 70°C. The overall performance encountered is discussed in terms of the possible roles of the polyamide interphase while taking into account mechanisms concerned with matrix plasticization, interphase degradation and residual stress relaxation.     

各向异性材料中共线刚性线夹杂的纵向剪切问题

本文研究各向异性材料中共线刚性线夹杂，（有时称作“硬裂纹”或“反裂纹”问题）的纵向剪切问题。利用复变函数方法，提出了一般问题的公式和某些实际重要问题的封闭形式解，考察了刚性线端点附近的应力分布．从本文解答的特殊情形，可以直接导出各向同性材料相应问题的公式和结果，包括某些已有的结果￣［７］．     

铸膜液溶剂体系的物理参数与BCA不对称膜的透气性

铸膜液的溶剂体系（溶剂和非溶剂）对不对称膜形态的形成有重要作用。为了探索溶剂和透气性间的关系，本文考虑到了制备ＢＣＡ梯度密度不对称膜的各种溶剂的一系列物理参数，得到了一些定性结果，并指出了更全面、明确、解释两者关系的研究方向。     

Measurements and simulations of particle dispersion in a turbulent flow

A particle imaging technique has been used to collect droplet displacement statistics in a round turbulent jet of air. Droplets are injected on the jet axis, and a laser sheet and position-sensitive photomultiplier tube are used to track their radial displacement and time-of-flight. Dispersion statistics can be computed which are Lagrangian or Eulerian in nature. The experiments have been simulated numerically using a second-order closure scheme for the jet and a stochastic simulation for the particle trajectories. Results are presented for non-vaporizing droplets of sizes from 35 to 160 μm. The simulations have underscored the importance of initial conditions and early droplet displacement history on the droplet trajectory for droplets with large inertia relative to the turbulence. Estimates of initial conditions have been made and their effect on dispersion is quantified.     

一维应变压缩下TC4钛合金绝热剪切研究

 利用内径为57 mm的压缩气炮，在撞击速度为0.2~1.2 km/s（相应的靶中压力为3~15 GPa）范围内进行对称碰撞实验，以研究TC4（Ti-Al6-V4）钛合金在一维应变冲击压缩条件下的绝热剪切现象。对回收得到的受冲击样品，在扫描电镜（SEM）下进行细观金相分析。结果指出，一维应变冲击压缩条件下，TC4钛合金中绝热剪切带产生的对称碰撞速度阈值为500 m/s（相当于样品中的压力为5.87 GPa）；主剪切带与冲击方向约为45°角，带上有圆形和椭圆形两种孔洞且随碰撞速度的增大而增多和长大，这是典型的韧性损伤特征。随碰撞速度增大，产生与主剪切带成15°角的支剪切带。这些与理论预言相符。X射线能谱分析结果指出，剪切带内材料发生了(α+β)→β相的转变，是典型的相变带。剪切带的温度估算与实验提供的信息吻合。     

A generalized Adadorov theory for anisotropic thin-walled beams

This paper presents a generalized Adadorov theory for anisotropic thin—walled beams. The theory takes account of the shear strain of the middle surface, which exerts a significant influence on the anisotropic thin-walled beams. A new approach is established to solve the governing equations, which have the same form for both open and closed section beams. The numerical examples show that the effects of the shear strain cannot be neglected for this class of beams.This work was part of research project supported by the National Natural Science Foundation of China     

关于修正的Baskakov算子的Stechin-Marchaud型不等式

利用K-泛函研究了修正的Baskakov型算子的Stechin-Marchaud型不等式,由此不等式,我们得到了关于ω2φλ的逆结果.     

Recognition of Monohydrogen Anions of Geometrical and Positional Isomers of Dicarboxylic Acids Based on Polymeric Liquid Membranes Incorporating Polyamine Host

Macrocyclic lipophilic polyamines were applied as the sensory elements of polymeric liquid membrane electrodes. These hosts gain the anion receptor functionality upon protons uptake from the aqueous solutions. The electrodes studied were able to distinguish potentiometricaly isomers of monocharged and doublecharged forms of ethylene and benzene dicarboxylic acids. The selectivity of interaction between protonated hosts and anionic guests relays not only on the electrostatic interactions, but on hydrogen bounds formations as well. The influence of lipophilicity of protonated hosts on the potential response generation was discussed.