Study of semiconductor lasers under simultaneous uniaxial stress and hydrostatic pressure

Abstract

We present the design of a device for the simultaneous application of uniaxial stress and hydrostatic pressure. This new apparatus will for the first time allow measurements at constant strain. Results of the simultaneous application of uniaxial stress and hydrostatic pressure to a semiconductor laser are presented and discussed.     

The elastic,electronic, and optical properties of PtSi and PtGe compounds

The structural, mechanical, electronic and optical properties of orthorhombic PtSi and PtGe were investigated using norm-conserving pseudopotentials within the local density approximation in the frame of density functional theory. The calculated lattice parameters and bulk modulus for PtSi and PtGe have been compared with the experimental and theoretical values. The second-order elastic constants were calculated, and the other related quantities such as the Young's modulus, shear modulus, Poisson's ratio, anisotropy factor, sound velocities and Debye temperature have also been estimated. The linear photon-energy dependent dielectric functions and some optical properties such as the energy-loss function, the effective number of valance electrons and the effective optical dielectric constant were calculated. Our structural estimation and some other results are in agreement with the available experimental and theoretical data.     

Reverse α–α´ phase separation in Fe-20Cr-6Al alloy

The reverse α–α′ phase separation in Fe-20Cr-6Al alloys has been monitored by differential scanning calorimetry in as-hot rolled and recrystallized samples previously aged at 435?°C. The splitting in the position of the minima, and the increasing enthalpy change involved, might be explained in terms of dissolution of α′ particles with different compositions and volume fractions. These results are fully consistent with the α–α′ phase separation kinetics determined by atom probe tomography during ageing at 435?°C. The monitoring of activation energy for α′ dissolution indicates that it is faster in as-hot rolled samples. Finally, the activation energy evolution indicates that there is first a dissolution of β′ Fe(AlTi) phase followed by α′ dissolution.     

Indentation of transversely isotropic power-law hardening materials: computational modelling of the forward and reverse problems

Using a combination of dimensional analysis and large deformation finite element simulations of triple indentations of 120 materials, a framework for capturing the indentation response of transversely isotropic materials is developed. By considering 4800 combinations of material properties within the bounds of the original set of 120 materials, forward algorithms that predict the indentation response of materials and reverse algorithms that predict the materials’ elastic and plastic properties from experimentally measured indentation responses are formulated for both longitudinal and transverse indentations. Issues of accuracy, reversibility, uniqueness and sensitivity within the context of the indentation of transversely isotropic materials are addressed carefully. Using 1400 combinations of material properties, it is demonstrated that there is perfect reversibility between the material properties and their indentation responses as predicted by the forward and reverse algorithms. On average, the differences between the results of the finite element analysis and those predicted by the forward algorithms for longitudinal or transverse indentations are less than 1%, thus demonstrating the high accuracy and uniqueness of the forward analysis. For longitudinal and transverse indentations, the reverse algorithms provide accurate results in most cases with an average error of 3 and 6%, respectively. A sensitivity analysis with a ±2% variation in the material properties in the forward algorithm and ±2% variation in the indentation responses in the reverse algorithms demonstrated the robustness of the algorithms developed in the present study, with the longitudinal indentations providing relatively less sensitivity to variability in indentation responses as compared to the transverse indentations.     

Effect of surface elasticity on scattering of elastic P-waves from a nanofiber including an inhomogeneous interphase

Scattering of elastic P-waves from a nanofiber in a matrix is studied analytically throughout this paper. An inhomogeneous interphase region is considered between the nanofiber and the matrix. Dividing the interphase into homogeneous sublayers, surface elasticity effects are studied in the layers adjacent to matrix and nanofiber. Wave function expansion method is used to solve the corresponding equations in all three phases including fiber, interphase, and matrix. Dynamic stress concentration factors around the nanofiber are calculated and utilizing a parametric study, effects of different parameters, such as nanoscale interface, interphase thickness, and interphase rigidity are investigated. The results indicate that considering the effects of surface elasticity in wave scattering problems from inhomogeneous interphases show a major impact on the results. The dimensionless equations presented in this paper provide the possibility of further numerical studies.     

Hysteresis of ruby fluorescent line by pressure and annealing effect

Abstract

Accuracy of hydrostatic pressure measurement in a diamond-anvil cell (DAC) depends on the reproducibility of ruby RI fluorescent measurement. The larger scatter in R, fluorescent wavelength shift than the reproducibility of spectroscopic measurement was observed among appropriately mirror-finished ruby plates before setting up in DAC. The characteristics of the scatter changed after loading DAC up to pressure over hydrostatic limit. They vanished by annealing the ruby plates. These phenomena are presumably due to the appearance and disappearance of the residual stress in the ruby crystal. Such hysteresis of ruby fluorescent wavelength shift by pressure and its annealing effect are discussed.     

激光喷丸改善TC6钛合金组织和力学性能

为了使激光冲击强化技术能较好地应用于TC6钛合金的发动机叶片,对TC6钛合金进行试验研究。通过X射线衍射仪、透射电子显微镜等测试技术分析了不同参数下TC6钛合金的微观组织变化,用显微硬度计和残余应力测试仪分别表征表层硬度和残余应力变化,并测试材料冲击后的振动高周疲劳性能。试验结果表明:激光冲击材料后表面组织得到明显细化,随着冲击次数的增加,先后出现了高密度位错、位错胞、亚晶和纳米晶。性能方面,表面硬度在冲击一次即可提高19%,硬度影响深度达到700 m;与此同时表面残余应力最高达到-608.5 MPa,在500 m深度上仍具有-100 MPa左右的应力存在。经三次冲击后,标准疲劳试片的疲劳极限提高近20%。     

硅衬底GaN基LED薄膜芯片的应力调制

将Si衬底GaN基LED外延薄膜经晶圆键合、去硅衬底等工艺制作成垂直结构GaN基LED薄膜芯片,并对其进行不同温度的连续退火,通过高分辨X射线衍射(HRXRD)研究了连续退火过程中GaN薄膜芯片的应力变化。研究发现:垂直结构LED薄膜芯片在160~180℃下退火应力释放明显,200℃时应力释放充分,GaN的晶格常数接近标准值。继续升温应力不再发生明显变化,GaN薄膜的晶格常数只在标准晶格常数值附近波动。扫描电子显微镜给出的bonding层中Ag-In合金情况很好地解释了薄膜芯片应力的变化。     

Effect of hemp surface modification on the morphological and tensile properties of linear medium density polyethylene (LMDPE) composites

This work investigates different hemp surface modifications (mercerization, maleated polyethylene (MAPE) addition in solution or in melt blending) to improve the properties of linear medium density polyethylene (LMDPE). From the composites produced, a complete morphological and tensile characterization was performed for a fixed hemp content (30% wt.). The morphological analysis showed that both the direct (melt blending) and solution modifications were able to significantly improve the composites interface quality and therefore the tensile properties (151% increase in modulus and 36% increase in strength over the neat matrix) within the range of conditions tested.