LBO晶体超光滑表面抛光机理

胶体SiO2抛光LBO晶体获得无损伤的超光滑表面,结合前人对抛光机理的认识,探讨了超光滑表面抛光的材料去除机理,分析了化学机械抛光中的原子级材料去除机理.在此基础上,对胶体SiO2抛光LBO晶体表面材料去除机理和超光滑表面的形成进行了详细的描述,研究抛光液的pH值与材料去除率和表面粗糙度的关系.LBO晶体超光滑表面抛光的材料去除机理是抛光液与晶体表面的活泼原子层发生化学反应形成过渡的软质层,软质层在磨料和抛光盘的作用下很容易被无损伤的去除.酸性条件下,随抛光液pH值的减小抛光材料的去除率增大;抛光液pH值为4时,获得最好的表面粗糙度.     

硅锗合金Seebeck系数影响因素的研究

作为一种洁净能源,硅锗合金的热电转换性能的研究越来越受到人们的重视.本文重点研究了不同Ge浓度的硅锗合金以及Si、Ge单晶在300～1100K温度范围内,Seebeck系数随温度的变化.并对组分相同导电类型不同、晶向不同以及结晶状态不同的样品的Seebeck系数进行了比较.在研究温度区间,Seebeck系数的绝对值大小一般在200～600μV/K之间,随温度不同连续变化.通过对比发现SiGe合金的Seebeck系数大小不仅与Ge的浓度和温度有关,其他因素对其绝对值也有影响,其中晶向最为明显,表现出了明显的各向异性.此外,材料本身的电阻率除了作为一个热电参数影响最优值外,其大小还对Seebeck系数的绝对值有影响,即掺杂济浓度对Seebeck系数的影响.     

聚苯乙烯型离子交换树脂的研究进展

介绍了聚苯乙烯型离子交换树脂的合成方法;综述了近年来在氯甲基化反应、Mannich反应以及磺化反应上的新进展、新理论：从结构上对聚苯乙烯型离子交换树脂的强度和热稳定性进行了分析。聚苯乙烯型离子交换树脂具有稳定的物理化学性质、吸附选择独特、再生容易、操作简便、使用周期长等优良性能,大大促进了化工企业、制药工业、环保、医疗、分析等行业的发展,具有广阔的发展前景。     

OBE理念推动化工设备机械基础课程的改革实践*

以应用型人才培养为目标,探索了利用OBE理念推动化工设备机械基础课程及其课程设计的改革实践。以OBE理念为指导,结合CDIO和LBL的教学模式,提出在教学内容、平台在线课程建设、第二课堂教学、课程设计和考核方法等方面的改革方案,增强了课程的应用性和成果产出,不仅提高了学生对理论知识掌握的牢固度,更提高了学生的实践能力、对知识的灵活应用能力和创新能力,与实际应用连接更加紧密,有效地实现了高素质的应用型人才输出。     

Mechanical property and deformation mechanism of gold nanowire with non-uniform distribution of twinned boundaries:A molecular dynamics simulation study

The mechanical property and deformation mechanism of twinned gold nanowire with non-uniform distribution of twinned boundaries(TBs) are studied by the molecular dynamics(MD) method. It is found that the twin boundary spacing(TBS) has a great effect on the strength and plasticity of the nanowires with uniform distribution of TBs. And the strength enhances with the decrease of TBS, while its plasticity declines. For the nanowires with non-uniform distribution of TBs, the differences in distribution among different TBSs have little effect on the Young's modulus or strength, and the compromise in strength appears. But the differences have a remarkable effect on the plasticity of twinned gold nanowire. The twinned gold nanowire with higher local symmetry ratio has better plasticity. The initial dislocations always form in the largest TBS and the fracture always appears at or near the twin boundaries adjacent to the smallest TBS. Some simulation results are consistent with the experimental results.     

Heterometallic Coii-Lii carboxylate complexes with N-heterocyclic carbene,triphenylphosphine and pyridine: a comparative study of magnetic properties

Heterometallic Coii-Lii compounds with N-heterocyclic carbene 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes), tri phenylphosphine (Ph3P) and pyridine (py), [Co2Li2(Piv)6(IMes)2] (Piv is the anion of pivalic acid), [Co2Li2(Piv)6(Ph3P)2] and [Co2Li2(Fur)6(py)2] (Fur is the anion of 2-furoic acid), respectively, have been prepared and structurally characterized by X-ray crystallography. Easy-plane magnetic anisotropy in Coii complexes with pseudo-tetrahedral cores CoO3X (X = C, P and N) was revealed by measuring the magnetic properties together with quantum-chemical calculations using the SA-CASSCF/NEVPT2 approach. The field-induced slow magnetic relaxation of the complexes was mainly attributed to the Raman and direct processes.     

Chemical and Mechanical Characterization of Licorice Root and Palm Leaf Waste Incorporated into Poly(urethane-acrylate) (PUA)

A poly(urethane-acrylate) polymer (PUA) was synthesized, and a sufficiently high molecular weight starting from urethane-acrylate oligomer (UAO) was obtained. PUA was then loaded with two types of powdered ligno-cellulosic waste, namely from licorice root and palm leaf, in amounts of 1, 5 and 10%, and the obtained composites were chemically and mechanically characterized. FTIR analysis of final PUA synthesized used for the composite production confirmed the new bonds formed during the polymerization process. The degradation temperatures of the two types of waste used were in line with what observed in most common natural fibers with an onset at 270 °C for licorice waste, and at 290 °C for palm leaf one. The former was more abundant in cellulose (44% vs. 12% lignin), whilst the latter was richer in lignin (30% vs. 26% cellulose). In the composites, only a limited reduction of degradation temperature was observed for palm leaf waste addition and some dispersion issues are observed for licorice root, leading to fluctuating results. Tensile performance of the composites indicates some reduction with respect to the pure polymer in terms of tensile strength, though stabilizing between data with 5 and 10% filler. In contrast, Shore A hardness of both composites slightly increases with higher filler content, while in stiffness-driven applications licorice-based composites showed potential due to an increase up to 50% compared to neat PUA. In general terms, the fracture surfaces tend to become rougher with filler introduction, which indicates the need for optimizing interfacial adhesion.     

Determination of polarity parameters for liquid crystals using solvatochromic method in anisotropic and isotropic phases

The use of liquid crystals (LCs) as anisotropic solvents is desired for various potential applications and usually for other organic and inorganic compounds. In this work, solvent polarity parameters are obtained using a spectroscopic method for four LCs with a range of high and low dielectric anisotropy (?ε). Solvatochromic polarity parameters for these LCs were defined via Kamlet–Abboud–Taft polarity functions characterizing different temperatures and phases, isotropic and anisotropic, and using the Reichardt’s dye and 2,6-diphenyl-4-(2,4,6-triphenyl-1-pyridinio) phenolate standard probe. The investigated polarity parameters reveal the effects of LC media on the photo-physical behaviour of solute molecules in isotropic and anisotropic media. Subsequently, a new LC polarity parameter (Z_o) is introduced as an overall matrix anisotropy polarity parameter to characterize variation between isotropic and anisotropic phases. The values of Z_o are sorted from higher to lower dielectric anisotropies (?ε).     

Poly (Ethylene Glycol)‐Based Hydrogels as Self‐Inflating Tissue Expanders with Tunable Mechanical and Swelling Properties

Tissue expansion is used by plastic/reconstructive surgeons to grow additional skin/tissue for replacing or repairing lost or damaged soft tissues. Recently, hydrogels have been widely used for tissue expansion applications. Herein, a self‐inflating tissue expander blend composition from three different molecular weights (2, 6, and 10 kDa) of poly (ethylene glycol) diacrylate (PEGDA) hydrogel with tunable mechanical and swelling properties is presented. The in vitro results demonstrate that, of the eight studied compositions, P6 (PEGDA 6 kDa:10 kDa (50:50)) and P8 (PEGDA 6 kDa:10 kDa (35:65)) formulations provide a balance of mechanical property and swelling capability suitable for tissue expansion. Furthermore, these expanders can be compressed up to 60% of their original height and can be loaded and unloaded cyclically at least ten times with no permanent deformation. The in vivo results indicate that these two engineered blend compositions are capable to generate a swelling pressure sufficient to dilate the surrounding tissue while retaining their original shape. The histological analyses reveal the formation of fibrous capsule at the interface between the implant and the subcutaneous tissue with no signs of inflammation. Ultimately, controlling the PEGDA chain length shows potential for the development of self‐inflating tissue expanders with tunable mechanical and swelling properties.

     

Interrelationship between total volatile organic compounds emissions,structure and properties of natural rubber/polycaprolactone bio-blends cross-linked with peroxides

Natural rubber/polycaprolactone (NR/PCL) bio-based blends with different organic peroxides were prepared using an internal batch mixer and subsequently cross-linked at 170 °C. Two types of commonly used organic peroxides, dicumyl peroxide and di(tert-butylperoxyisopropyl)benzene peroxide, were applied as free-radical initiator. Cross-linking efficiency of NR/PCL blends were investigated using oscillating disc rheometer measurements, followed by infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis and tensile testing. Total volatile organic compounds (TVOCs) emissions were determined using headspace analysis integrated with gas chromatography with flame ionization detector. Determined TVOCs emissions varying in range 21.6–52.1 μg/g and generally value of this parameter decreased with increasing content of PCL phase in studied blends or with application of more efficient di(tert-butylperoxyisopropyl)benzene peroxide as cross-linking agent. It was found that increasing of TVOCs parameter indicated deterioration of mechanical properties of NR/PCL blends, which corresponded with the changes in chemical structure and thermal properties of cross-linked NR/PCL. This confirms that evaluation of TVOCs parameter is interesting alternative for “conventional methods” to characterization of the studied bio-based blends.