稀薄气体二维外部柱体绕流特性研究

本文采用直接模拟蒙特卡罗方法对稀薄气体二维外部柱体绕流问题进行了数值模拟。结果表明:外部绕流问题,在特定情况下会产生激波,激波的产生,不仅与气体的稀薄程度有关,还与来流马赫数有关。而气流与壁面之间的换热,随来流马赫数增加而增加,随气体稀薄程度增加而减小。     

环形燃烧室火焰简及旋流器流场计算

本文采用偏微分方程法生成贴体网格,在任意曲线坐标系下数值研究两种先进燃烧室火焰筒及其旋流器三维紊流流场。由于旋流器的形状复杂,本文采用型线定点法确定网格的边界。在非交错网格系下采用SIMPLE算法和混合差分格式对离散方程进行求解。计算结果表明计算方法合理,这计算程序进一步扩展,可用来预估环形燃烧室反应流流场。     

Optimal Control of Magnetohydrodynamic Equations with State Constraint

This work is concerned with the maximum principle for optimal control problem governed by magnetohydrodynamic equations, which describe the motion of a viscous incompressible conducting fluid in a magnetic field and consist of a subtle coupling of the Navier-Stokes equation of viscous incompressible fluid flow and the Maxwell equation of electromagnetic field. An integral type state constraint is considered.     

Interior point cutting plane method for optimal power flow

In this paper, an interior point cutting plane method (IPCPM)is applied to solve optimal power flow (OPF) problems. Comparedwith the simplex cutting plane method (SCPM), the IPCPM is simpler,and efficient because of its polynomial-time characteristic.Issues in implementing IPCPM for OPF problems are addressed,including (1) how to generate cutting planes without using thesimplex tableau, (2) how to identify the basis variables inIPCPM, and (3) how to generate mixed integer cutting planes.The calculation speed of the proposed algorithm is further enhancedby utilizing the sparsity features of the OPF formulation. Numericalsimulations on IEEE 14-300-bus test systems have shown thatthe proposed method is effective.     

Combining Swaps and Node Weights in an Adaptive Greedy Approach for the Maximum Clique Problem

In this work, the NP-hard maximum clique problem on graphs is considered. Starting from basic greedy heuristics, modifications and improvements are proposed and combined in a two-phase heuristic procedure. In the first phase an improved greedy procedure is applied starting from each node of the graph; on the basis of the results of this phase a reduced subset of nodes is selected and an adaptive greedy algorithm is repeatedly started to build cliques around such nodes. In each restart the selection of nodes is biased by the maximal clique generated in the previous execution. Computational results are reported on the DIMACS benchmarks suite. Remarkably, the two-phase procedure successfully solves the difficult Brockington-Culberson instances, and is generally competitive with state-of-the-art much more complex heuristics.     

低进汽压力下超音速两相流升压特性实验研究

本文采用实验方法研究了进汽压力为0.2 MPa以下时,由蒸汽喷嘴、混合腔及相应的阀门和管道组成超音速汽液两相流升压加热装置的运行特性。实验表明在进汽压力为0.1 MPa-0.2 MPa时,超音速汽液两相流升压加热装置都可稳定可靠地运行,且升压效果明显,可满足电力、供暖、轻工等许多行业蒸汽加热的要求。     

某轴流压气机叶尖间隙效应实验研究

本文对某低速轴流压气机叶尖间隙尺度对性能的影响进行了实验研究,并通过不同的机匣结构情况研究一种叶尖漏流不敏感机匣。实验表明,不同的间隙尺度对叶轮机总体性能存在十分明显的影响。对绝大部分运行状态,小间隙下的压升和效率均明显高于大间隙的情况。另外,所采用的毛刷式和篦齿式的机匣实验结果表明,不论毛刷式还是篦齿式机匣,在大流量负攻角情况下对性能的影响不大,但毛刷式机匣并不能达到提高失速裕度的目的,而篦齿式机匣在小流量情况下对压升有所提高,但对效率影响不大。     

Weaving hadamard matrices with maximum excess and classes with small excess

Weaving is a matrix construction developed in 1990 for the purpose of obtaining new weighing matrices. Hadamard matrices obtained by weaving have the same orders as those obtained using the Kronecker product, but weaving affords greater control over the internal structure of matrices constructed, leading to many new Hadamard equivalence classes among these known orders. It is known that different classes of Hadamard matrices may have different maximum excess. We explain why those classes with smaller excess may be of interest, apply the method of weaving to explore this question, and obtain constructions for new Hadamard matrices with maximum excess in their respective classes. With this method, we are also able to construct Hadamard matrices of near‐maximal excess with ease, in orders too large for other by‐hand constructions to be of much value. We obtain new lower bounds for the maximum excess among Hadamard matrices in some orders by constructing candidates for the largest excess. For example, we construct a Hadamard matrix with excess 1408 in order 128, larger than all previously known values. We obtain classes of Hadamard matrices of order 96 with maximum excess 912 and 920, which demonstrates that the maximum excess for classes of that order may assume at least three different values. Since the excess of a woven Hadamard matrix is determined by the row sums of the matrices used to weave it, we also investigate the properties of row sums of Hadamard matrices and give lists of them in small orders. © 2004 Wiley Periodicals, Inc. J Combin Designs 12: 233–255, 2004.     

On the Second Law of Thermodynamics and the Piston Problem

The piston problem is investigated in the case where the length of the cylinder is infinite (on both sides) and the ratio m/M is a very small parameter, where m is the mass of one particle of the gaz and M is the mass of the piston. Introducing initial conditions such that the stochastic motion of the piston remains in the average at the origin (no drift), it is shown that the time evolution of the fluids, analytically derived from Liouville equation in a previous work, agrees with the Second Law of thermodynamics. We thus have a non equilibrium microscopical model whose evolution can be explicitly shown to obey the two laws of thermodynamics.     

On two functionals connected to the Laplacian in a class of doubly connected domains in space-forms

LetB ₁ be a ball of radiusr ₁ inS ⁿ (ℍⁿ), and letB ₀ be a smaller ball of radiusr ₀ such thatB ₀ ⊂B ₁ . ForS ⁿ we considerr ₁ π. Let u be a solution of the problem- δm = 1 in Ω :=B ₁ /B ₀ vanishing on the boundary. It is shown that the associated functionalJ (Ω) is minimal if and only if the balls are concentric. It is also shown that the first Dirichlet eigenvalue of the Laplacian on Ω is maximal if and only if the balls are concentric.