一种非刚性医学图像点匹配方法

提出了一种非刚性点匹配的算法并把其运用于医学图像配准．该算法采用信号滤波的方法来获得点集间的匹配信息，并运用松弛标记法将各点邻域关系对模糊的匹配信息进行迭代获得明确的匹配关系．在此基础上，利用高斯径向基函数来描述点模式间的弹性形变，在基本的迭代框架下实现问题的求解．实验结果显示在形变程度为5％、出格点比率50％和噪声标准差为5％的情况下该算法的匹配误差能控制在0．13以下，表明了该算法的鲁棒性和有效性，较好地解决了医学非刚性形变的点匹配问题．     

多级轴流压气机全工况特性计算

本文使用三维粘性流动计算软件Fine／Numeca,对某十五级轴流压气机进行了内流流场和全工况特性的数值计算尝试。分析了该压气机在设计工况和非设计工况的性能,同时把整机计算结果和前七级叶片的计算结果进行了比较。计算结果表明,当计算的级数较少时,目前的软件和硬件平台可以比较合理地预测压气机的全工况特性;而当计算的级数较多时,准确的数值模拟仍需要更为准确的多级模型和数值方法。     

Synthesis of poly(p‐phenylene sulfide) from bis(4‐bromophenyl) disulfide

Improved reaction conditions for the preparation of poly(p‐phenylene sulfide) (PPS) directly from bis(4‐bromophenyl) disulfide (BBD) have been established. Heating BBD with magnesium metal afforded only a low molecular weight polymer. PPS with a melting temperature around 280 °C was obtained from BBD in the presence of sodium carbonate or zinc metal. The best results were obtained with the addition of a catalytic amount of KI to the zinc–BBD mixture. Polymers prepared by the above methods are semicrystalline and dissolve in 1‐chloronaphthalene and have properties comparable to commercial PPS. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 900–904, 2006     

Chemically modified proton‐conducting membranes based on sulfonated polyimides: Improved water stability and fuel‐cell performance

A series of branched/crosslinked sulfonated polyimide (B/C‐SPI) membranes were prepared and evaluated as proton‐conducting ionomers based on the new concept of in situ crosslinking from sulfonated polyimide (SPI) oligomers and triamine monomers. Chemical branching and crosslinking in SPI oligomers with 1,3,5‐tris(4‐aminophenoxy)benzene as a crosslinker gave the polymer membranes very good water stability and mechanical properties under an accelerated aging treatment in water at 130 °C, despite their high ion‐exchange capacity (2.2–2.6 mequiv g^?1). The resulting polymer electrolytes displayed high proton conductivities of 0.2–0.3 S cm^?1 at 120 °C in water and reasonably high conductivities of 0.02–0.03 S cm^?1 at 50% relative humidity. In a single H₂/O₂ fuel‐cell system at 90 °C, they exhibited high fuel‐cell performances comparable to those of Nafion 112. The B/C‐SPI membranes also displayed good performances in a direct methanol fuel cell with methanol concentrations as high as 50 wt % that were superior to those of Nafion 112. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3751–3762, 2006     

Lithographic design of photosensitive polyarylates based on reaction development patterning

The factors affecting pattern‐forming properties in reaction development patterning were examined with polyarylates with various bisphenol moieties. The developability of the photosensitive polyarylates was dependent on the properties of the subtituent (R) in the bisphenol moieties. The development time decreased in the following order: R?C(CH₃)₂ > fluorenyl unit ? phenolphthalein unit > C(CF₃)₂ > SO₂. This order agreed with that of the reactivity between the polyarylates and ethanolamine, and these orders can be explained by pK_a of the bisphenol used to prepare the polyarylates. The development with NH₂? R′? OH resulted in successful positive‐tone pattern formation. However, pattern formation with the developers containing NH₂? R′? OCH₃ was unsuccessful. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2694–2706, 2006     

Evaluation of piezoelectric PVDF polymers for use in space environments. III. Comparison of the effects of vacuum UV and gamma radiation

Films of piezoelectric PVDF and P(VDF‐TrFE) were exposed to vacuum UV (115–300 nm VUV) and γ‐radiation to investigate how these two forms of radiation affect the chemical, morphological, and piezoelectric properties of the polymers. The extent of crosslinking was almost identical in both polymers after γ‐irradiation, but surprisingly, was significantly higher for the TrFE copolymer after VUV‐irradiation. Changes in the melting behavior were also more significant in the TrFE copolymer after VUV‐irradiation due to both surface and bulk crosslinking, compared with only surface crosslinking for the PVDF films. The piezoelectric properties (measured using d₃₃ piezoelectric coefficients and D‐E hysteresis loops) were unchanged in the PVDF homopolymer, while the TrFE copolymer exhibited more narrow D‐E loops after exposure to either γ‐ or VUV‐radiation. The more severe damage to the TrFE copolymer in comparison with the PVDF homopolymer after VUV‐irradiation is explained by different energy deposition characteristics. The short wavelength, highly energetic photons are undoubtedly absorbed in the surface layers of both polymers, and we propose that while the longer wavelength components of the VUV‐radiation are absorbed by the bulk of the TrFE copolymer causing crosslinking, they are transmitted harmlessly in the PVDF homopolymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3253–3264, 2006     

Sample-path optimization of convex stochastic performance functions

In this paper we propose a method for optimizing convex performance functions in stochastic systems. These functions can include expected performance in static systems and steady-state performance in discrete-event dynamic systems; they may be nonsmooth. The method is closely related to retrospective simulation optimization; it appears to overcome some limitations of stochastic approximation, which is often applied to such problems. We explain the method and give computational results for two classes of problems: tandem production lines with up to 50 machines, and stochastic PERT (Program Evaluation and Review Technique) problems with up to 70 nodes and 110 arcs. Sponsored by the National Science Foundation under grant number CCR-9109345, by the Air Force Systems Command, USAF, under grant numbers F49620-93-1-0068 and F49620-95-1-0222, by the U.S. Army Research Office under grant number DAAL03-92-G-0408, and by the U.S. Army Space and Strategic Defense Command under contract number DASG60-91-C-0144. The U.S. Government has certain rights in this material, and is authorized to reproduce and distribute reprints for Governmental purposes notwithstanding any copyright notation thereon. Sponsored by a Wisconsin/Hilldale Research Award, by the U.S. Army Space and Strategic Defense Command under contract number DASG60-91-C-0144, and the Air Force Systems Command, USAF, under grant number F49620-93-1-0068. Sponsored by the National Science Foundation under grant number DDM-9201813.     

高效液相色谱法测定精对苯二甲酸中微量杂质

建立了高效液相色谱法（HPLC）同时测定精对-苯二甲酸（PTA）中微量杂质4-羧基苯甲醛（4-CBA）、对-甲基苯甲酸（P-TOL）和苯甲酸（C7H6O2）含量的方法。采用的色谱柱为Shim-PackWAX-1柱，流动相为0.1mol/L NH3H2PO4 6%CH3OH，(pH4.5)，检测波长为254nm。PTA中微量杂质4-CBA、P-TOL和C7H6O2的含量分别为0.59-235.20mg/kg、4.52-392.00mg/kg和0.28-24.55mg/kg时线性关系良好，其线性相关系数分别为0.9998、0.9997和0.9999。苯甲酸加样平均回收率99.03％，RSD0.37％。     

高效液相色谱法测定细胞分裂素的方法研究

利用高效液相色谱法测定水稻愈伤组织和微生物发酵产品中的玉米素，二氢玉米素，核糖基玉米素和核糖基二氢玉米素。样品用抽提液抽提，经Ｂｉｏ－Ｒｅｘ７０弱阳离子交换柱和ＸＡＤ－７／Ｓｅｐ－ｐａｋＣ１８复合柱净化和富集后，直接用ＨＰＬＣ分析，方法回收率达９４％～８４％，相对标准偏差小于３．３％。最低检测限达２．０ｎｇ。