Dependence of polarization mode dispersion of slotted core NZDF ribbon on cable design and environmental conditions

Non-zero dispersion fiber (NZDF) ribbon cable has recently become a considerable alternative in long-haul high-speed network construction. Since long-distance high-bit rate transmission requires low polarization mode dispersion (PMD), it is very important to know the PMD performance of this type of optical fiber cables. In this paper, we report experimental analysis of effects of the cable design and environmental parameters, in particular ribbon thickness, positions of fibers in the ribbon, flexing and vibration, on PMD performances of several slotted-core fiber ribbon cables. Results show that ribbon thickness and positions of fibers in the ribbon alter the PMD values of NZDF ribbon cables. Also, 23% and 11% PMD variations have been determined in flexing and vibration experiments, respectively. Moreover, it has been observed that vibration amplitude has significant effects and vibration frequency has little effects (14% and 6% variations, respectively) on fiber PMD. Results are important for understanding effects of installation conditions and wind, especially for aerial fibers, on PMD values of cables.     

Mathematical Modelling of Cable Stayed Bridges: Existence, Uniqueness, Continuous Dependence on Data, Homogenization of Cable Systems

A model of a cable stayed bridge is proposed. This model describes the behaviour of the center span, the part between pylons, hung on one row of cable stays. The existence, the uniqueness of a solution of a time independent problem and the continuous dependence on data are proved. The existence and the uniqueness of a solution of a linearized dynamic problem are proved. A homogenizing procedure making it possible to replace cables by a continuous system is proposed. A nonlinear dynamic problem connected with the homogenizing procedure is proposed and the existence and uniqueness of a solution are proved.     

考虑随机弱化二阶效应的电缆流变断裂学分析

将电缆视作为ｎ股子束构成的线束，而每股子束由ｍ个平行的受拉元件组成，受拉元件就是渍于树脂基体的聚合物肌绳。未破坏的元件在任一时刻都按照某种规律承载，表现出电缆断裂对持载时间和载荷特征的相依性，从而，电缆的断裂是一个非平衡态不可逆热力学相容的一个非线性动力学演化假设下，我们考虑单个元件受载断裂与线束受载的关系。认识到元件的数目一一大时，线事的破坏时间是近正态分析的。     

FORCED WAVE PROPAGATION IN VISCOELASTIC CABLE WITH SMALL SAG

Based on the linear viscoelastic differential constitutive law and cable structural model, the coupled longitudinal-transverse waves that propagate along a viscoelastic cable with small curvature is investigated. A mathematical model is presented that describes the three-dimensional nonlinear response of a viscoelastic cable. An asymptotic form of this model is obtained for the linear response of cables having small equilibrium curvature. The spectral relation governing the propagating waves is derived using transform methods. The spectral relation is employed in deriving a Green's function that is then used to construct solutions for in-plane response under distributed harmonic excitation. Analysis of forced response reveals the existence of two types of periodic waves that propagate through the cable, one characterizing extension-comprehensive deformation and the other characteristic transverse deformation. Project supported by the National Natural Science Foundation of China (No. 59635140).     

单层平面索网幕墙结构的风振响应分析及实用抗风设计方法

单层平面索网玻璃幕墙结构是广泛应用于大型公共建筑中的一种新型结构形式,由于其具有柔性大、质量轻、阻尼小、自振频率低的特点,属风敏感结构。由于单索幕墙具有较高的几何非线性,本文采用基于随机振动理论的模态叠加频域方法进行了单索幕墙结构的风振响应分析。将模态叠加频域方法的计算结果和非线性时程分析方法的精确计算结果进行了比较,证明了该方法的准确性。并且本文通过分析各阶模态对单索幕墙结构风振响应的贡献,得到脉动风荷载下结构的振动以第一阶模态为主的结论。根据该结论本文采用频域方法推导了单索幕墙结构的位移均方差和索内力均方差的实用计算公式,同时考虑单索幕墙的结构特点提出了基于结构响应的单索幕墙结构实用抗风设计方法。     

大跨度斜拉桥动力特性分析

本文提出一种计算大距度钢桁梁斜拉桥动力特性的方法。文中分别采用桁段有限单元、空间梁元、空间杆元计算斜拉桥中桁架，桥塔、拉索的刚度矩阵与质量矩阵，采用子空间迭代法求解特征方程，所得结果可供设计参考。     

空间曲线索的平衡方程及单索几何判定

空间曲线索平衡方程可在理想柔索假定的基础上进行推导,也可以由空间曲线梁平衡方程退化得到。本文给出后者的连续化分析过程并进行了初步的讨论,目的在于将空间曲线索的各种力学模型统一起来。采用理想柔索假定后单索只能是平面曲线,自然坐标系和整体直角坐标系下平面曲线索的平衡方程是等价的。同时,针对以往单索连续化分析中几何判定的不足,基于空间曲线的弧长独立参数概念,指出单根理想柔索本质上为静不定和动不定体系。     

彩色光弹性干涉影像分析系统

自行开发的“彩色光弹性干涉影像分析系统”首先利用CCD成像和图像采集设备,将光弹图像以数字图像的形式存储到计算机,然后通过对存储的光弹图像进行处理,得到物体边界、等差线、等倾线等数据。最后根据这些数据,绘制出主应力迹线,并进行二维的和三维的应力分析。本文着重介绍了系统整体设计以及系统研制的难点问题(彩色光弹图像处理、主应力迹线的绘制等)。系统可以通过对彩色图像进行分解,应用目前已经比较成熟的灰度光弹图像处理技术,来完成彩色图像的处理;也可以直接应用彩色信息来确定条纹级数,进行相关处理。彩色图像能够比灰度图像提供更精确的图像信息,以满足高精度测量的要求。     

A Gallium‐Substituted Distibene and an Antimony‐Analogue Bicyclo[1.1.0]butane: Synthesis and Solid‐State Structures

RGa {R=HC[C(Me)N(2,6‐iPr₂C₆H₃)]₂} reacts with Sb(NMe₂)₃ with insertion into the Sb? N bond and elimination of RGa(NMe₂)₂ ( 2 ), yielding the Ga‐substituted distibene R(Me₂N)GaSb?SbGa(NMe₂)R ( 1 ). Thermolysis of 1 proceeded with elimination of RGa and 2 and subsequent formation of the bicyclo[1.1.0]butane analogue [R(Me₂N)Ga]₂Sb₄ ( 3 ).     

Six‐Coordinate Group 13 Complexes: The Role of d Orbitals and Electron‐Rich Multi‐Center Bonding

Bonding in six‐coordinate complexes based on Group 13 elements (B, Al, Ga, In, Tl) is usually considered to be identical to that in transition‐metal analogues. We herein demonstrate through sophisticated electronic‐structure analyses that the bonding in these Group 13 element complexes is fundamentally different and better characterized as electron‐rich hypervalent bonding with essentially no role for the d orbitals. This characteristic is carried through to the molecular properties of the complex.