Recovery performance and characteristics in shape memory effects of aliphatic polyether urethane

The analysis on the recovery performance and characteristics in shape memory effects is helpful for the optimal design and engineering applications of shape memory polymers and their composites. To investigate the relationships among recovery performance, material parameters, and loading conditions, by taking aliphatic polyether urethane as an example, the researchers simulate the shape memory behaviors numerically using a three‐dimensional viscoelastic model. The material parameters for this model are taken from stress relaxation tests, rather than dynamic mechanical analysis tests. Both the unconstrained and the constrained recovery behaviors during strain‐controlled shape memory processes are analyzed. The results reveal that the unconstrained recovery occurs at the same temperature regardless of the applied strain values. Another interesting result is that the shape recovery temperature in unconstrained recovery situations increases and the maximum recovery stress under constrained recovery conditions decreases with the increase of heating rates. Copyright © 2013 John Wiley & Sons, Ltd.     

基于偶氮联吡啶配体的银和钴配位聚合物的构筑与性质

通过将2个4,4''-联吡啶基团用偶氮基团连接,我们合成了新的配体顺式-和反式-1,2-二（（4,4''-联吡啶）-3-氮烯）（cis-L和trans-L）,并利用trans-L与银离子和钴离子构筑了配位聚合物{[Ag₂（trans-L）（ClO₄）₂]·4CH₃CN}_n（1）和{[Co（trans-L）₂（H₂O）₂]（ClO₄）₂}_n（2）。其中1为一维梯形链,链与链之间通过π-π以及Ag…Ag相互作用堆积;2为三维无限dendrimer结构,其Co中心具有合适的氧化还原电位,在以荧光素为光敏剂的条件下,可作为光催化剂实现光解水放氢。     

Fe2O3/Al2O3氧载体用于甲烷化学链燃烧：负载量与制备方法的影响

以不同方法制备了系列Fe₂O₃/Al₂O₃氧载体,采用XRD、H₂-TPR、CH₄-TPR、O₂-TPD和BET等分析技术对氧载体进行了表征。研究了不同Fe₂O₃负载量氧载体的甲烷化学链燃烧性能,考察了不同制备方法对Fe₂O₃/Al₂O₃氧载体结构、反应性和产物选择性的影响。结果表明,Fe₂O₃负载量对氧载体活性及产物中CO₂选择性的影响较大,负载量较低时氧载体活性较低且引起甲烷部分氧化产物CO含量增加。制备方法亦对氧载体与甲烷的反应活性有所影响,整体上共沉淀法制备的质量分数60％Fe₂O₃/Al₂O₃氧载体具有较高的氧化活性和化学链循环稳定性。其在反应温度850℃、反应时间15 min、30次循环后甲烷转化率及产物中CO₂选择性均未见明显降低。     

Mechanistic Insights into Copper‐Catalyzed Sonogashira–Hagihara‐Type Cross‐Coupling Reactions: Sub‐Mol % Catalyst Loadings and Ligand Effects

An efficient catalytic system for Sonogashira–Hagihara‐type reactions displaying ligand acceleration in the copper‐catalyzed formation of C(sp²)? C(sp) bonds is described. The structure of the ligand plays a key role for the coupling efficiency. Various copper sources show excellent catalytic activity, even in sub‐mol % quantities. A wide variety of substituents is tolerated in the substrates. Mechanistic details have been revealed by kinetic measurements and DFT calculations.     

三维介孔氨基三亚甲基膦酸锆的合成及其担载铁催化剂的甲醛催化氧化活性

以氧氯化锆和氨基三亚甲基膦酸(ATMP)为原料合成了一种新型介孔材料氨基三亚甲基膦酸锆(NTAZP)。使用XRD、FTIR、TG-DTA和SEM等手段对所合成的介孔材料进行了结构表征和形貌分析。然后以NTAZP为载体,用Fe(NO3)3水溶液处理,得到担载Fe3+的氨基三亚甲基膦酸锆。研究结果表明,Fe3+被吸附到载体孔道中后,NTAZP结构未被破坏,Fe3+离子与NTAZP孔壁骨架上的N发生了配位作用。铁担载NTAZP(NTAZP-Fe3+)对甲醛氧化具有良好的催化活性,催化反应条件温和,催化剂稳定性良好。以载体NTAZP担载铁还避免了Fe3+进入水体,催化剂得以回收利用,避免造成二次污染。NTAZP-Fe3+是一种高效绿色的新型小分子醛类化合物氧化催化剂。     

Modeling and analysis of a marine plankton system with nutrient recycling and diffusion

This article describes a nutrient‐phytoplankton‐zooplankton system with nutrient recycling in the presence of toxicity. We have studied the dynamical behavior of the system with delayed nutrient recycling in the first part of the article. Uniform persistent of the system is examined. In the second part of the article, we have incorporated diffusion of the plankton population to the system and dynamical behavior of the system is analyzed with instantaneous nutrient recycling. The condition of the diffusion driven instability is obtained. The conditions for the occurrence of Hopf and Turing bifurcation critical line in a spatial domain are derived. Variation of the system with small periodicity of diffusive coefficient has been studied. Stability condition of the plankton system subject to the periodic diffusion coefficient of the zooplankton is derived. It is observed that nutrient‐phytoplankton‐zooplankton interactions are very complex and situation specific. Moreover, we have obtained different exciting results, ranging from stable situation to cyclic oscillatory behavior may occur under different favorable conditions, which may give some insights for predictive management. © 2014 Wiley Periodicals, Inc. Complexity 21: 229–241, 2015     

Loading characteristics and chemical stability of headgroup‐functionalized poly(ethylene glycol)‐lipid ligand tethers on polypropylene capillary‐channeled polymer fibers

Polypropylene capillary‐channeled polymer fibers have been modified by adsorption of headgroup‐functionalized poly(ethylene glycol)‐lipids to generate a species‐specific stationary phase. In order to study ligand binding characteristics, a fluorescein‐labeled poly(ethylene glycol)‐lipid was used as a model system. Breakthrough curves and frontal analysis were employed to characterize the surface loading characteristics across a range of lipid concentrations and mobile phase flow rates. Efficient mass transfer and fluid transport yield a linear adsorption isotherm up to the maximum loading concentration of 3 mg/mL, at a linear velocity of 57.1 mm/s. Under these conditions, the dynamic binding capacity was found to be 1.52 mg/g of fiber support. Variation of the linear velocity from 8.6 to 57.1 mm/s showed only small changes in breakthrough volume. The maximum capacity of 1.8 mg/g is found under conditions of a load velocity of 34.2 mm/s and a concentration of 3 mg/mL lipid. Exposure of the lipid modified fibers to several challenge solvents reveals a chemically robust system, with only 50% acetonitrile and hexanes able to disrupt the lipid adsorption. The straightforward capillary‐channeled polymer fiber surface modification with headgroup‐functionalized lipids provides both a diverse yet practically robust ligand tethering system.     

高分散还原态Pt基催化剂的制备及其NO氧化的催化性能

Pt⁰被认为是NO氧化的活性物种,而催化剂的制备方法对活性物种的含量起着决定性作用。本文采用非惰性气氛保护的改性醇还原-浸渍法(MARI)合成了高分散高Pt⁰含量的1% (w, 质量分数) Pt/SiO₂-Al₂O₃催化剂(MA-Pt/SA)。X射线粉末衍射(XRD)、CO-漫反射傅里叶变换红外吸收光谱(CO-DRIFTS)和透射电镜(TEM)表征证实在550 ℃焙烧3 h后催化剂的Pt颗粒仅有3.8 nm。同时,X射线光电子能谱(XPS)和H₂-程序升温还原(H₂-TPR)结果表明催化剂具有高Pt⁰含量(60.3%)。模拟柴油车尾气气氛进行活性测试,并与传统浸渍法制备的1% (w) Pt/SiO₂-Al₂O₃催化剂(C-Pt/SA)对比,结果显示MA-Pt/SA具有优异的催化氧化性能,其NO最大转化率高达74%,比C-Pt/SA的NO转化率高了23%。经670 ℃高温老化15 h后,老化的MA-Pt/SA的NO转化率仍然高达69%。此外NO + O₂共吸附原位漫反射傅里叶变换红外吸收光谱(in situ DRIFTS of NO + O₂ co-adsorption)表明高的Pt分散度和高Pt⁰含量能够促进中间物种桥式硝酸盐的生成及分解,进而导致了优异的NO氧化活性。最后,利用同样方法将Pt的负载量降低至0.5% (w)制备催化剂,NO转化率仍达64%。这种制备方法能够获得低贵金属高性能的Pt基催化剂。     

初中化学“主题式项目化学习”的理念与实践*

初中化学“主题式项目化学习”是学生在主题情境中,从先前项目经验中汲取灵感,对真实且具有内在联系的驱动型任务进行深入探究的学习方式。“主题式项目化学习”的各个项目不是独立的,而是具有层层递进的内在联系,并被整合进一个主题情境中。不同项目之间的“相似性”为学生提供了迁移和应用知识的机会,而“相异性”又迫使学生审慎思考知识的适用范围。新旧项目的不断交互串联起了学生的学习历程,使经验连续生长、认知不断发展。     

基于氮掺杂活性炭催化氧化合成氮甲基氧化吗啉的研究

以三聚氰胺为氮源,商用活性炭为研究对象,通过“浸渍吸附+高温热处理”的方式制得系列氮掺杂活性炭,并用于催化氧化合成氮甲基氧化吗啉（NMMO）。采用N₂吸附/脱附、Raman、XPS等对氮掺杂活性炭的孔结构和表面性质进行了表征。结果表明：随着三聚氰胺负载量的增大,氮掺杂活性炭的表面碱性含氮官能团含量增大,进而体现出更好的催化氧化合成NMMO活性。最佳催化剂（ACO850-20N）在催化剂加量为0.02 wt%,反应温度70 ℃和反应时间4 h的工艺条件下,氮甲基吗啉的转化率和NMMO收率可达99.76%和94.31%。