Utilization of the BARC critical facility for ADS related experiments

The paper discusses the basic design of the critical facility, whose main purpose is the physics validation of AHWR. Apart from moderator level control, the facility will have shutdown systems based on shutoff rods and multiple ranges of neutron detection systems. In addition, it will have a flux mapping system based on 25 fission chambers, distributed in the core. We are planning to use this reactor for experiments with a suitable source to simulate an ADS system. Any desired sub-criticality can be achieved by adjusting the moderator level. Apart from perfecting our experimental techniques, in simple configurations, we intend to study the one-way coupled core in this facility. Preliminary calculations, employing a Monte Carlo code TRIPOLI, are presented.      

Transmutation of 129I, 237Np, 238Pu, 239Pu, and 241Am using neutrons produced in target-blanket system ‘Energy plus Transmutation’ by relativistic protons

Target-blanket facility ‘Energy + Transmutation’ was irradiated by proton beam extracted from the Nuclotron Accelerator in Laboratory of High Energies of Joint Institute for Nuclear Research in Dubna, Russia. Neutrons generated by the spallation reactions of 0.7, 1.0, 1.5 and 2 GeV protons and lead target interact with subcritical uranium blanket. In the neutron field outside the blanket, radioactive iodine, neptunium, plutonium and americium samples were irradiated and transmutation reaction yields (residual nuclei production yields) have been determined using γ-spectroscopy. Neutron field's energy distribution has also been studied using a set of threshold detectors. Results of transmutation studies of ¹²⁹I, ²³⁷Np, ²³⁸Pu, ²³⁹Pu and ²⁴¹Am are presented.      

The possibility to use ‘energy plus transmutation’ set-up for neutron production and transport benchmark studies

The set-up ‘energy plus transmutation’, consisting of a thick lead target and a natural uranium blanket, was irradiated by relativistic proton beams with the energy from 0.7 GeV up to 2 GeV. Neutron field was measured in different places of this set-up using different activation detectors. The possibilities of using the obtained data for benchmark studies are analyzed in this paper. Uncertainties of experimental data are shown and discussed. The experimental data are compared with results of simulation with MCNPX code.      

A numerical study of the target system of an ADSS with different flow guides

The mechanical design of the target module of an accelerator driven subcritical nuclear reactor system (ADSS) calls for an analysis of the related thermal-hydraulic issues because of large amount of heat deposition in the spallation region during the course of nuclear interactions with the molten lead bismuth eutectic (LBE) target. The LBE also should carry the entire heat generated as a consequence of the spallation reaction. The problem of heat removal by the LBE is a challenging thermal-hydraulic issue. For this, one has to examine the flows of low Prandtl number fluids (LBE) in a complex ADSS geometry. In this study, the equations governing the laminar flow and thermal energy are solved numerically using the streamline upwind Petrov-Galerkin (SUPG) finite element (FE) method. The target systems with a straight and a nozzle guide have been considered. The principal purpose of the analysis is to trace the flow and temperature distribution and thereby to check the suitability of the flow guide in avoiding the recirculation or stagnation zones in the flow space that may lead to hot spots.      

Neutron cross-sections above 20 MeV for design and modeling of accelerator driven systems

One of the outstanding new developments in the field of partitioning and transmutation (P&T) concerns accelerator-driven systems (ADS) which consist of a combination of a high-power, high-energy accelerator, a spallation target for neutron production and a sub-critical reactor core. The development of the commercial critical reactors of today motivated a large effort on nuclear data up to about 20 MeV, and presently several million data points can be found in various data libraries. At higher energies, data are scarce or even non-existent. With the development of nuclear techniques based on neutrons at higher energies, nowadays there is a need also for higher-energy nuclear data. To provide alternative to this lack of data, a wide program on neutron-induced data related to ADS for P&T is running at the 20–180 MeV neutron beam facility at ‘The Svedberg Laboratory’ (TSL), Uppsala. The programme encompasses studies of elastic scattering, inelastic neutron production, i.e., (n, xn′) reactions, light-ion production, fission and production of heavy residues. Recent results are presented and future program of development is outlined.      

HCSB-DEMO�������������ȷ�����������

根据HCSB-DEMO堆的设计要求,对不同尺寸的聚变堆能产生的聚变功率、中子壁负载和等离子体燃烧时间等进行计算与分析,给出了符合设计要求的堆芯参数。在所选定的堆芯参数条件下进行了零维功率平衡计算分析,给出了3组HCSB-DEMO堆的等离子体初步设计参数。     

Numerical simulation of 2D lid‐driven cavity flow with CLEARER algorithm on extremely highly skewed grids at high Reynolds numbers

It is crucial to deal with the grid non‐orthogonality effectively in solving the flow in complex geometries, especially at high Reynolds numbers. In this study, the newly proposed Coupled and Linked Equations Algorithm Revised‐ER (CLEARER) algorithm is adopted to solve this problem successfully. In CLEARER algorithm the second relaxation factor is introduced in constructing the contravariant interface velocities, by setting it to a low value. CLEARER algorithm can overcome the severe grid non‐orthogonality and non‐linearity of equations effectively. After the numerical results with CLEARER are validated with the benchmark solutions, this algorithm is used to solve the lid‐driven flow in inclined cavity with inclination angles varying from 10 to 170^°, and Reynolds numbers varying from 5000 to 15 000. The streamlines and the centerline velocity distributions are provided in detail for all cases, which may offer some guidance for the study in this area. Copyright © 2010 John Wiley & Sons, Ltd.     

A Theory of Electron Transfer in Bridged and Supramolecular Systems

Expressions are derived for the tunnel electric current between two metals produced by the adiabatic transitions of the electrons through a bridge electron level. A new possible physical phenomenon is discussed, viz. electronically driven oscillations of the electron bridge level between two molecular wires.     

Role of Ag addition in L10 ordering of FePt-based nanocomposite magnets

The FePt system has important perspectives as high-temperature corrosion-resistant magnets. In the form of rapidly solidified melt-spun ribbons, FePt-based magnets may exhibit in certain cases a two-phase hard–soft magnetic behaviour. The present paper deals with a microstructural and magnetic study of FePtAgB alloys with increasing Ag content. The aim is to identify and confirm the effect of Ag addition in decreasing the temperature of the FePt disorder–order structural phase transformation. A detailed high-resolution transmission electron microscopy study is employed, and the alternative disposal of hard and soft regions within the two-phase microstructure is observed and interpreted with respect to the X-ray diffraction results. In the as-cast Ag-containing samples, it is shown that there is an optimum of the Ag content for which best magnetic properties are obtained. Ag addition creates a nonlinear behaviour of the coercive field and the ordering parameter, similar to the RKKY interaction-induced interlayer exchange coupling (IEC) observed in magnetic layers separated by non-magnetic spacer layers. Direct formation of the L1₀ phase from the as-cast state in the FePtAgB alloys is reported with magnetic parameters compatible to other exchange spring permanent nanomagnets. These findings open novel perspectives into utilization of such alloys in applications requiring magnets operating in high-temperature industrial environments.