PZ等添加剂对氨法脱碳影响的实验研究

本文在湿壁塔实验台上,针对2.67 mol/L氨水溶液分别混入0.1 mol/L的PZ(哌嗪)、AMP(2-氨基-2-甲基-1-丙醇)、AMPD(2-氨基-2-甲基-1,3-丙二醇)和THAM(2-氨基-2-羟甲基-1,3-丙二醇)等有机胺添加剂吸收CO_2的过程,进行了20℃下的气液传质和反应动力学实验研究。实验结果表明,混入PZ可以最有效地提高氨水的吸收速率。本文还在20℃下分别进行了2.67 mol/L氨水和0.1 mol/L PZ单独吸收CO_2的吸收速率实验,研究发现,氨水和PZ的混合溶液吸收CO_2的速率强于两者单独吸收的简单加合,二者在吸收过程中相互促进。研究还发现,氨水和PZ混合溶液吸收CO_2的相互促进率最大可达近50%。     

Enhanced high temperature cycling performance of LiMn2O4/graphite cells with methylene methanedisulfonate（MMDS） as electrolyte additive and its acting mechanism

The effects of methylene methanedisulfonate(MMDS) on the high-temperature(~50℃) cycle performance of LiMn_2O_4/graphite cells are investigated.By addition of 2 wt%MMDS into a routine electrolyte,the high-temperature cycling performance of LiMn204/graphite cells can be significantly improved.The analysis of differential capacity curves and energy-dispersive X-ray spectrometry(EDX) indicates that MMDS decomposed on both cathode and anode.The three-electrode system of pouch cell is used to reveal the capacity loss mechanism in the cells.It is shown that the capacity fading of cells without MMDS in the electrolytes is due to irreversible lithium consumption during cycling and irreversible damage of LiMn_2O_4 material,while the capacity fading of cell with 2 wt%MMDS in electrolytes mainly originated from irreversible lithium consumption during cycling.     

分析测试新成果(230~237)2种常见燃油添加剂对汽油燃烧烟尘的影响

采用气相色谱-质谱(GC-MS)联用技术,根据汽油原样中的特征成分,对未加入和分别加入汽油燃油精、海龙燃油宝的汽油燃烧烟尘进行对比分析.结果表明,汽油燃油精的加入会使汽油燃烧烟尘中各类特征成分的百分含量有所变化,但对谱图和特征成分的影响较小;而海龙燃油宝的加入对汽油燃烧烟尘的谱图、特征成分及其个数、各类特征成分的百分含量均产生较大影响.结果为火灾物证鉴定提供一定的参考依据.     

六种添加剂对烟丝挥发性与半挥发性成分含量的影响

分别配制1%(质量分数,下同)的柠檬酸、苹果酸、乳酸水溶液以及5%的(NH4)2HPO4、K2CO3、柠檬酸钾水溶液.分别取100.0g烟丝,均匀喷洒10.0mL上述水溶液,经平衡、实验室模拟烘丝、萃取后,进行气相色谱-质谱测定,分析烟丝中挥发性和半挥发性香味成分含量的变化.结果表明,喷洒柠檬酸和K2CO3水溶液可显著改变烟丝的化学成分含量.烟丝经K2CO3水溶液喷洒后,游离态的尼古丁含量大幅增加,醇类组分、巨豆三烯酮含量有所升高,酸类组分和酯类组分含量略有降低;而经柠檬酸水溶液喷洒后的烟丝的酸类、醇类和酯类组分含量升高,尼古丁含量下降.     

Enhanced high temperature cycling performance of LiMn2O4/graphite cells with methylene methanedisulfonate (MMDS) as electrolyte additive and its acting mechanism

The effects of methylene methanedisulfonate(MMDS) on the high-temperature(~50℃) cycle performance of LiMn_2O_4/graphite cells are investigated.By addition of 2 wt%MMDS into a routine electrolyte,the high-temperature cycling performance of LiMn204/graphite cells can be significantly improved.The analysis of differential capacity curves and energy-dispersive X-ray spectrometry(EDX) indicates that MMDS decomposed on both cathode and anode.The three-electrode system of pouch cell is used to reveal the capacity loss mechanism in the cells.It is shown that the capacity fading of cells without MMDS in the electrolytes is due to irreversible lithium consumption during cycling and irreversible damage of LiMn_2O_4 material,while the capacity fading of cell with 2 wt%MMDS in electrolytes mainly originated from irreversible lithium consumption during cycling.     

A Total Solution to Baseline Separation of 20 Brominated Flame Retardant Additives in Electronic Products with Automated Soxhlet Hot Extraction and Gas Chromatography‐Mass Spectrometry

An efficient and reliable separation technique based on automated Soxhlet hot extraction (AHSE) was developed and validated. It can be applied to rapid separations of 20 persistent organic pollutants, including two types of brominated flame retardants (BFRs), polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) contained in nonmetallic component parts of electronic products. The qualitative chromatographic analyses were carried out by using a gas chromatography coupled with a mass spectrometry detector (GC‐MS). The 20 persistent organic pollutants were simultaneously and completely separated by a 15 meter HP‐5MS short capillary column in 25 minutes. Through the tests of extraction performance, effects of solvent and extraction time on selected BFRs were investigated; toluene and 120 min extraction time were chose as the optimum conditions. Besides, this article examines the influence of temperature on the chromatographic analysis, the optimum temperature parameters were 280 °C and 320 °C for injector and column, respectively. The ASHE‐GCMS method was validated for the analysis of the certified reference material of CRM8110‐a and IRMM310. The limits of detection (LOD) for polymer sample was 0.55‐4.50 μg mL^?1; linearity range from 0.11 to 16 μg mL^?1. The proposed methodology can fully meet the requirement of relational directives.     

Strategic Approaches to the Dendritic Growth and Interfacial Reaction of Lithium Metal Anode

Utilization of lithium (Li) metal anode is highly desirable for achieving high energy density batteries. Even so, the unavoidable features of Li dendritic growth and inactive Li are still the main factors that hinder its practical application. During plating and stripping, the solid electrolyte interphase (SEI) layer can provide passivation, playing an important role in preventing direct contact between the electrolyte and the electrode in Li metal batteries. Because of complexities of the electrolyte chemical and electrochemical reactions, the various formation mechanisms for the SEI are still not well understood. What we do know is that a strategic artificial SEI achieved through additives electrolyte can suppress the Li dendrites. Otherwise, the dendrites keep generating an abundance of irreversible Li, resulting in severe capacity loss, internal short-circuiting, and cell failure. In this minireview, we focus on the phenomenon of dendritic Li-growth and provide a brief overview of SEI formation. We finally provide some clear insights and perspectives toward practical application of Li metal batteries.     

Damping properties of composites based on interpenetrating polymer networks formed in the presence of compatibilizing additives

From the results of an analysis of the viscoelastic characteristics of semi-interpenetrating polymer networks (semi-IPNs) that are based on a crosslinked polyurethane and a linear polystyrene and are formed in the presence of compatibilizing additives (oligourethane dimethacrylate and ethylene glycol monomethacrylate), their damping ability is est mated. Such parameters as the tangent of mechanical loss (tan δ) at the glass-transition temperature, the temperature interval of effective damping (where tan δ > 0.3), and the loss area under the loss modulus vs. temperature plots are used as the criteria of damping ability. It is shown that the introduction of the compatibilizing additives to the semi-IPNs extends the interval of their effective damping temperature. By varying the composition of the material and the amount of the compatibilizing additives, it is possible to realize a purposeful selection of vibration-damping materials for solving specific technological problems. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 42, No. 4, pp. 545–558, July–August, 2006.     

Life‐cycle toxicity of dibutyltin to the sheepshead minnow (Cyprinodon variegatus) and implications of the ubiquitous tributyltin impurity in test material

Dibutyltin (DBT) is used in the plastics polymerization process as a catalyst in polyvinyl chloride (PVC) products and is the primary degradation product of tributyltin (TBT), an antifoulant in marine paint. DBT and other organotin compounds make their way into the environment through antifoulants, PVC processing plants, and PVC products maintained in water and water‐handling systems. A flow‐through saltwater life‐cycle toxicity test was conducted to determine the chronic effect of DBT to the sheepshead minnow (Cyprinodon variegatus Lacepede), an estuarine species. Embryos were monitored through hatch, maturation, growth, and reproduction in DBT concentrations of 158, 286, 453, 887, and 1510 µg l^?1. Progeny were monitored for survival as embryos and fry/juveniles, and growth for 30 days post‐isolation. Mean length of parental generation fish was significantly reduced on day 30 at DBT concentrations ≥887 µg l^?1, setting the lowest observable effect concentration (LOEC) at 887 µg l^?1 and the no observable effect concentration (NOEC) at 453 µg l^?1. Fecundity, as egg viability, was significantly reduced at the LOEC. Survival of parental and progeny generation embryos and mean length, wet weight and dry weight of progeny generation juveniles were not significantly affected at concentrations ≤LOEC. TBT, a toxic impurity in DBT reversibly produced in DBT by the process of comproportionation, was also monitored throughout this study. Comparing measured levels of TBT in this study with levels exerting toxic effects in an earlier TBT life‐cycle study with C. variegatus suggests biological responses in this study were likely due to the TBT impurity and not to DBT alone. Results indicate that TBT impurity as low as 0.1% may have a significant influence on the perceived toxicity of DBT and that spontaneous production of TBT in DBT may be the major source of biological toxicity of DBT. Copyright © 2003 John Wiley & Sons, Ltd.     

Salt effect on polyaddition of bifunctional cyclic carbonate and diamine

The effect of various additives was examined for polyaddition of bifunctional cyclic carbonate and diamine giving poly(hydroxyurethane). Lithium chloride and lithium fluoride especially proved to be effective for the acceleration that resulted in giving polymers with higher molecular weights without coloration. The IR spectroscopic analysis of the mixtures of the additives and the carbonate monomer suggested that the acceleration with the lithium salts depends on the activation of the carbonyl group to enhance its electrophilicity. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6282–6286, 2005