Architectures for ultrasonic planetary sample retrieval tools

Traditional rotary corers and sample retrieval mechanisms for planetary drilling suffer from a variety of technical difficulties. A heavy and rigid drillstring must be assembled on-site and deployed with considerable applied preload and torque, and these mechanical loadings are difficult to react in a low gravity environment. Furthermore the entire drillstring must often be removed to retrieve samples, unless an augering approach is taken, in which case stratigraphic sequencing is lost. Ultrasonic tools which operate by converting an ultrasonic frequency to a low impacting frequency at the tool end can resolve the mechanical problems because they require very low applied preload and no torque to operate. In developing such a tool, however, several fundamental design decisions must be taken regarding the architecture of the transducer, horn and stack. These include the choice of solid or hollow transducers and the employment of single or multiple free-masses at the ultrasonic to low frequency conversion location. This paper addresses the layout of such a system by contrasting the pros and cons of these architectural choices and concludes that a solid system with a single free-mass provides the best performance in the parameter range here discussed.     

脉冲序列控制CCM Buck变换器低频波动现象分析

报道了脉冲序列(pulse train, PT)控制电感电流连续导电模式(continuous conduction mode,CCM) Buck变换器中存在的低频波动现象,研究了其产生机理和抑制方法.时域仿真结果和输出电压与电感电流的相空间轨迹图表明,输出滤波电容等效串联电阻(equivalent series resistance,ESR)是影响PT控制CCM Buck变换器控制性能的重要因素.当ESR值为零或很小时,PT控制CCM Buck变换器将出现由于输出电压调整不及时而呈现的低频波动现象;随着 关键词： 低频波动 脉冲序列控制 Buck变换器 连续导电模式     

A low-frequency wideband metamaterial absorber based on a cave-disk resonator and resistive film

A low-frequency wideband, polarization-insensitive and wide-angle metamaterial absorber (MA) is designed, simulated and analyzed. This MA consists of a periodic arrangement of a cave-disk resonator (CDR), square resistive film (RF), and metal ground plane (GP) (a 0.8 mm-thick FR-4 dielectric spacer is sandwiched in between the CDR and RF, and another 1.2-mm thick FR-4 dielectric spacer is inserted in between the RF and GP). The simulated results based on finite integration technology (FIT) indicate that the absorption of the MA is greater than 90% and almost perfectly impedance- matched to the free space in the whole frequency range of 1 GHz-7 GHz. The simulated absorptions under the conditions of different polarization and incident angles indicate that this composite structure absorber is polarization-insensitive and wide-angled. Furthermore, the distribution of the power loss density indicates that the wideband absorptivity is mainly from the composite electromagnetic loss of the CDR and RF. This design provides an effective and feasible way to construct a low-frequency wideband absorber.     

非晶铟锌氧化物薄膜晶体管的低频噪声特性与分析

本文针对底栅结构非晶铟锌氧化物薄膜晶体管的低频噪声特性开展实验与理论研究.由实验结果可知:受铟锌氧化物与二氧化硅界面处缺陷态俘获与释放载流子效应的影响,器件沟道电流噪声功率谱密度随频率的变化遵循1/fγ(γ≈0.75)的变化规律;此外,器件沟道电流归一化噪声功率谱密度随沟道长度与沟道宽度的增加而减小,证明器件低频噪声来源于沟道的闪烁噪声,可忽略源漏结接触及寄生电阻对器件低频噪声的影响.最后,基于载流子数涨落及迁移率涨落模型,提取γ因子与平均Hooge因子,为评价材料及器件特性奠定基础.     

代理模型在机翼油箱晃动适航审定中的应用

飞机飞行过程中,机翼油箱易受扰动或激励作用而产生低频晃动,引起机翼油箱壁面变形失效.本文将响应面代理模型引入飞机复合材料燃油箱晃动适航审定工作,以晃动频率、晃动幅值和油箱载液比为自变量,以油箱外壁面最大主应变峰值为响应,建立了油箱上下蒙皮响应面统计模型,给出油箱上下蒙皮最大主应变峰值与激励频率、幅值和油箱载液比等因素的显式响应函数.开展物理全尺寸试验和流固耦合数值模拟验证代理模型的有效性.结果 表明,上下蒙皮最大主应变峰值呈非线性趋势,存在最危险载液比使得主应变峰值最大化,且油箱破坏多发生在下蒙皮.     

新型局域共振声子晶体结构的低频带隙特性研究

本文提出了一种新型四角连接局域共振声子晶体结构,并结合有限元方法对该结构的能带及其产生机理进行了分析.与全连接结构相比,该结构在200 Hz以下的低频范围内打开了超过41.7;的带隙,而且降低了结构质量.将该结构等效为“弹簧+质量块”模型,并推导出带隙估算公式.结果表明,采用comsol计算得到的带隙与估算得到的带隙具有较好的一致性.同时研究了结构参数对带隙的影响,通过选择适当的结构参数,可以实现对带隙频率的调控.研究结果为声子晶体结构的工程实际应用提供了有益的支撑.     

Intermittency and bifurcation in SEPICs under voltage-mode control

A stroboscopic map for voltage-controlled single ended primary inductor converter (SEPIC) with pulse width modulation (PWM) is presented, where low-frequency oscillating phenomena such as quasi-periodic and intermittent quasi-periodic bifurcations occurring in the system are captured by numerical and experimental methods. According to bifurcation diagrams and nonlinear dynamical theory, the characteristics of the low-frequency oscillation and the mechanism for the appearance of the low-frequency oscillation are investigated. It is shown that as the controller parameter varies, the change in the conduction mode takes place from the continuous conduction mode (CCM) under the originally stable period one and high periodic orbits to the intermittent changes between CCM and discontinuous conduction mode (DCM), which may be related to the losing stability of the system and brought the system to exhibiting low-frequency oscillating behaviour in the time domain. Moreover, the occurrence of the intermittent quasi-periodic oscillation reflects that the system undergoes a Neimark--Sacker bifurcation.     

新型负模量声学超结构的低频宽带机理研究

提出了一种具有负模量特性的新型声学超结构,并揭示了其低频带隙的形成及拓宽机理.通过理论推导给出了该新型结构的归一化有效模量表达式,由于有效模量的零值点与系统参数密切相关,可以调节合适的参数使得零值点降低或带隙下界降低,进一步实现低频带隙.理论结果表明,在一定的频率范围内,系统的弹性模量为负且负模量区域进一步拓宽,从而通过负模量区域的放大而拓宽带隙.这种新的实现低频带隙的方法克服了传统局域共振附加质量过大及惯性放大结构带隙较窄的缺点.同时,通过有限元法得到的周期结构的传输率随着结构参数的变化趋势与理论分析的变化趋势基本一致,并得到了约40—180 Hz的低频宽带.这种实现低频带隙的新思路对低频声波的控制具有很重要的理论指导意义.     

基于低频压缩光的声频信号测量

低频信号测量在引力波探测、生物成像及磁场测量等方面具有重要的应用价值.本文利用非简并光学参量放大器获得了低频压缩态光场,在频率19 kHz处直接测到的压缩度为(7.1±0.1)dB;将产生的正交位相压缩态光场注入到马赫-曾德尔干涉仪中,实现了超越散粒噪声极限(3.0±0.4)dB的声频相位信号的测量.本实验的开展为低频压缩光的产生及基于低频压缩光的声频信号测量提供了一定技术支撑,并且此技术有望扩展到磁场、空间小位移等其他物理量的量子精密测量方案中.     

基于量子增强型光纤马赫-曾德尔干涉仪的低频信号测量

利用低频光通信波段真空压缩态光场可实现基于光纤的量子精密测量.本文利用简并光学参量振荡器实验制备出1550 nm低频真空压缩态光场.在分析频段10—500 kHz范围内压缩态光场的压缩度均达3 dB.用实验制备的1550 nm真空压缩态光场填补光纤马赫-曾德尔干涉仪的真空通道,实现了量子增强型光纤马赫-曾德尔干涉仪,完成了突破标准量子极限的相位调制频率为500 kHz的低频信号测量.与光纤马赫-曾德尔干涉仪相比,测量信噪比提高了2 dB.