Numerical analysis of conservative unstructured discretisations for low Mach flows

Unstructured meshes allow easily representing complex geometries and to refine in regions of interest without adding control volumes in unnecessary regions. However, numerical schemes used on unstructured grids have to be properly defined in order to minimise numerical errors. An assessment of a low Mach algorithm for laminar and turbulent flows on unstructured meshes using collocated and staggered formulations is presented. For staggered formulations using cell‐centred velocity reconstructions, the standard first‐order method is shown to be inaccurate in low Mach flows on unstructured grids. A recently proposed least squares procedure for incompressible flows is extended to the low Mach regime and shown to significantly improve the behaviour of the algorithm. Regarding collocated discretisations, the odd–even pressure decoupling is handled through a kinetic energy conserving flux interpolation scheme. This approach is shown to efficiently handle variable‐density flows. Besides, different face interpolations schemes for unstructured meshes are analysed. A kinetic energy‐preserving scheme is applied to the momentum equations, namely, the symmetry‐preserving scheme. Furthermore, a new approach to define the far‐neighbouring nodes of the quadratic upstream interpolation for convective kinematics scheme is presented and analysed. The method is suitable for both structured and unstructured grids, either uniform or not. The proposed algorithm and the spatial schemes are assessed against a function reconstruction, a differentially heated cavity and a turbulent self‐igniting diffusion flame. It is shown that the proposed algorithm accurately represents unsteady variable‐density flows. Furthermore, the quadratic upstream interpolation for convective kinematics scheme shows close to second‐order behaviour on unstructured meshes, and the symmetry‐preserving is reliably used in all computations. Copyright © 2016 John Wiley & Sons, Ltd.     

Blue-phase liquid crystal display with high dielectric material

A blue-phase liquid crystal display (BPLCD) with low operating voltage and high transmittance is demonstrated by using a high dielectric material, which is used as an insulation layer or protrusion fixed on the pixel and common electrodes in in-plane switching (IPS) mode. The operating voltage is reduced to about 14 V and the transmittance is improved for the BPLCD with high dielectric constant protrusion. Compared with the conventional protrusion electrode structure, the proposed protrusion can make manufacturing process simple and easy because the electrode has no complex shape. The results will be significant in designing optimal BPLCDs.     

Indandione-Terminated Quinoidal Compounds for Low-Bandgap Small Molecules with Strong Near-Infrared Absorption: Effect of Conjugation Length on the Properties

Low-bandgap organic semiconductors have attracted much attention for their multiple applications in optoelectronics. However, the realization of narrow bandgap is challenging particularly for small molecules. Herein, we have synthesized four quinoidal compounds, i. e., QSN3 , QSN4 , QSN5 and QSN6 , with electron rich S,N-heteroacene as the quinoidal core and indandione as the end-groups. The optical bandgap of the quinoidal compounds is systematically decreased with the extension of quinoidal skeleton, while maintaining stable closed-shell ground state. QSN6 absorbs an intense absorption in the first and second near-infrared region in the solid state, and has extremely low optical bandgap of 0.74 eV. Cyclic voltammetry analyses reveal that the lowest unoccupied molecular orbital (LUMO) energy levels of the four quinoidal compounds all lie below −4.1 eV, resulting in good electron-transporting characteristics in organic thin-film transistors. These results demonstrated that the combination of π-extended quinoidal core and end-groups in quinoidal compounds is an effective strategy for the synthesis of low-bandgap small molecules with good stability.     

Development of a multi‐scale ocean model by using particle Laplacian method for anisotropic mass transfer

The direct injection of CO₂ into the deep ocean is one of the feasible ways for the mitigation of the global warming, although there is a concern about its environmental impact near the injection point. To minimize its biological impact, it is necessary to make CO₂ disperse as quickly as possible, and it is said that injection with a pipe towed by a moving ship is effective for this purpose. Because the injection ship moves over a spatial scale of O(10²km), a mesoscale model is necessary to analyse the dispersion of CO₂. At the same time, since it is important to investigate high CO₂ concentration near the injection point, a small‐scale model is also required. Therefore, in this study, a numerical model was developed to analyse CO₂ dispersion in the deep ocean by using a fixed mesoscale and a moving small‐scale grid systems, the latter of which is nested and moves in the former along the trajectory of the moving ship. To overcome the artificial diffusion of mass concentration at the interface of the two different grid systems and to keep its spatial accuracy almost the same as that in the small‐scale, a particle Laplacian method was adopted and newly modified for anisotropic diffusion in the ocean. Copyright © 2010 John Wiley & Sons, Ltd.     

Beam dynamics and RF design of trapezoidal IH-RFQ with low energy spread

Beam dynamics and RF design have been performed of a new type trapezoidal IH-RFQ operating at 104 MHz for acceleration of 14C+ in the framework of RFQ based 14C AMS facility at Peking University. Low energy spread RFQ beam dynamics design was approached by the method of internal discrete bunching. 14C+ will be accelerated from 40 keV to 500 keV with the length of about 1.1 m. The designed transmission efficiency is better than 95% and the energy spread is as low as 0.6%. Combining the beam dynamics design, a trapezoidal IH-RFQ structure was proposed, which can be cooled more easily and has better mechanical performance than traditional RFQ. Electromagnetic field distribution was simulated by using CST Microwave Studio (MWS). The specific shunt impedance and the quality factor were optimized primarily.     

小型家用空调器除霜方式的探讨

提高低温制热量是小型家用空调器技术的一个难点,除霜带来的热量损失是低温制热量损失的一个重要方面。对小型家用空调器的除霜技术的发展进行了分析和总结,对小型家用空调器提出了一些新的除霜方式,对提高空调器的低温制热量、使用性能有重要意义。     

Thermal behaviour,surface properties and vibrational spectroscopic studies of the synthesized Co3xNi3−3x(PO4)2·8H2O (0 ≤ x ≤ 1)

Co_3xNi_3−3x(PO₄)₂·8H₂O (x = 1, 0.8, 0.6, 0.4, 0.2, and 0) were synthesized via simple wet chemical reaction and energy saving route method. The final decomposition products of hydrates are corresponding anhydrous tri(cobalt nickel) diphosphates. The metal and water contents of the synthesized hydrates were confirmed by AAS and TG/DTG/DTA techniques, respectively. The observed metal and water contents agree well with the formula of the title compounds. The crystal structures and lattice parameters as well as crystallite sizes of the studied compounds were determined using XRD data. The results from XRD and TG/DTG/DTA techniques confirmed that Co_3xNi_3−3x(PO₄)₂·8H₂O at all ratios were the single phase. The FTIR spectra of studied compounds were recorded and assigned. The thermal behaviours of single and binary tri(cobalt nickel) diphosphate octahydrates were studied for the first time. The morphologies of the studied compounds were investigated by using the SEM technique. The micrographs of all studied compounds exhibited the thin plated morphology. The surface area and the pore size data of anhydrous forms were measured by N₂ adsorption at −190 °C according to the BET method. The anhydrous forms of binary metal phosphate at x = 0.8, Co_2.4Ni_0.6(PO₄)₂, exhibits the highest surface area and expects to improve the catalytic activity.     

Synthesis and characteristics of photopolymerized benzophenone

Photopolymerization is extensively used in today's industrial field due to its advantages of rapid reaction, environmental friendly, energy saving and economical. Benzophenone is a most common photoinitiator (PI) using in photopolymerization because of its superior ability to initiate acrylate monomers. However, the intrinsic nature of initiator molecules is that they migrate out of polymer network, which limits its application, especially in the domain of food packaging materials. A polymerizable PI 4‐methylbenzophenone acrylate (MBPAc) was synthesized by a facile procedure and characterized by ¹H NMR, ¹³C NMR, and MS analyses. A systematic study of the photopolymerization kinetics of MBPAc was explored by the Real‐Time Fourier Transform Infrared Spectrometer. The results show that the final conversion and photopolymerization rate of acrylate monomers are closely related to the factors of their chemical structure, viscosity, functionality and light intensity, which means MBPAc is an efficient PI. Ultraviolet‐visible Spectrophotometer and vitro cytotoxicity measurement results indicate that the noncytotoxic MBPAc shows significantly lower migration than its analogue. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 313–320     

Analysis of visual perception of light emitting diode brightness in dense fog with various droplet sizes

Road signs must provide a conspicuous signal to a wide variety of drivers over a broad range of environmental and geometric conditions. Recently, there are an increasing number of applications in which light emitting diodes (LEDs) are used as the light source, including critical transportation signaling. In the presence of fog, the resulting visual signal is disturbed due to light scattering by airborne water droplets. By measuring LED brightness with human spectral sensitivity in various densities and various droplet sizes (10, 30, 50, and 100 μm), it is understood that the particle size distribution (fog droplet size) and density of fog does affect visibility in fog. The colored LEDs that contain a yellow component had high brightness evaluation, blue component had low brightness evaluation in all densities and different droplet sizes. The result in this paper can contribute to air and land traffic safety and the prevention of accidents.