Zhiber-Shabat方程的多辛几何和多辛隐式格式研究

Zhiber-Shabat方程,描述许多重要的物理现象,是一类重要的非线性方程,有着许多广泛的应用前景.本文给出Zhiber-Shabat方程的多辛几何结构和多辛Fourier拟谱方法.数值算例结果表明多辛离散格式具有较好的长时间的数值稳定性.     

可加稳定过程的自相交局部时

本文研究了可加稳定过程的自相交局部时的问题.利用Borel–Canteil引理等方法,得到可加稳定过程的自相交局部时的Hlder上界,推广了文献[5]中的结果.     

Switching adaptive controllers to control fractional‐order complex systems with unknown structure and input nonlinearities

This article investigates the chaos control problem for the fractional‐order chaotic systems containing unknown structure and input nonlinearities. Two types of nonlinearity in the control input are considered. In the first case, a general continuous nonlinearity input is supposed in the controller, and in the second case, the unknown dead‐zone input is included. In each case, a proper switching adaptive controller is introduced to stabilize the fractional‐order chaotic system in the presence of unknown parameters and uncertainties. The control methods are designed based on the boundedness property of the chaotic system's states, where, in the proposed methods the nonlinear/linear dynamic terms of the fractional‐order chaotic systems are assumed to be fully unknown. The analytical results of the mentioned techniques are proved by the stability analysis theorem of fractional‐order systems and the adaptive control method. In addition, as an application of the proposed methods, single input adaptive controllers are adopted for control of a class of three‐dimensional nonlinear fractional‐order chaotic systems. And finally, some numerical examples illustrate the correctness of the analytical results. © 2014 Wiley Periodicals, Inc. Complexity 21: 211–223, 2015     

爆轰波对碰驱动平面锡飞层的动力学及动载行为特征研究

强冲击下的物质变形、破坏及诱发的轻重介质混合问题,是内爆压缩科学和工程应用领域的研究重点.本文针对爆轰波对碰条件下的复杂加载动力学过程及其动载破坏形态特征,开展数值模拟研究与极曲线理论分析.设计了爆轰波对碰驱动平面锡飞层的计算模型,获得了爆轰加载动力学过程及波系相互作用物理图像,分析了锡飞层对碰区自由表面速度历史的典型特征.给出了锡飞层中折射激波对碰发生马赫反射的临界条件,解读了三波结构的传播行为,阐明了对碰区内存在"一维正冲击"区域,一维区外存在单次斜冲击向两次斜冲击过渡的复杂加载动力学过程,提出了对碰区冲击动力学模型,揭示了影响对碰区动载行为特征的机理.数值模拟结果与极曲线理论分析结果相互印证,符合较好.本文的研究成果,将为深入理解和解读对碰区特殊的物质破坏及混合现象提供重要的理论支撑.     

Ultrasound-assisted crystallization (sonocrystallization)

The positive influence of ultrasound (US) on crystallization processes is shown by the dramatic reduction of the induction period, supersaturation conditions and metastable zone width. Manipulation of this influence can be achieved by changing US-related variables such as frequency, intensity, power and even geometrical characteristics of the ultrasonic device (e.g. horn type size). The volume of the sonicated solution and irradiation time are also variables to be optimized in a case-by-case basis as the mechanisms of US action on crystallization remain to be established. Nevertheless, the results obtained so far make foreseeable that crystal size distribution, and even crystal shape, can be ‘tailored’ by appropriate selection of the sonication conditions.     

A local parallel superconvergence method for the incompressible flow by coarsening projection

In this article, we investigate a local parallel superconvergence method by coarsening projection for the incompressible Stokes flow. The method is a combination of the local superconvergence technique and the given framework of local parallel method. For the smooth subdomains, the local superconvergence method is applied in a higher order finite dimensional space corresponding to an appropriate coarse mesh on interior domain. Moreover, a useful and flexible local parallel method is designed to obtain the local parallel superconvergence results of presented method, which offset theoretical limitation of the model without the smoothness of the exact solution and a priori regularity of the underlying problem over the whole domain. © 2014 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 31: 1209–1223, 2015     

AN EXPLICIT FINITE VOLUME SPATIAL MARCHING METHOD FOR REDUCED NAVIER–STOKES EQUATIONS

This paper develops a spatial marching method for high-speed flows based on a finite volume approach. The method employs the reduced Navier– Stokes equations and a pressure splitting in the streamwise direction based on the Vigneron strategy. For marching from an upstream station to one downstream the modified five-level Runge–Kutta integration scheme due to Jameson and Schmidt is used. In addition, for shock handling and for good convergence properties the method employs a matrix form of the artificial dissipation terms, which has been shown to improve the accuracy of predictions. To achieve a fast rate of convergence, a local time-stepping concept is used. The method retains the time derivative in the governing equations and the solution at every spatial station is obtained in an iterative manner. The developed method is validated against two test cases: (a) supersonic flow past a flat plate; and (b) hypersonic flow past a compression corner involving a strong viscous–inviscid interaction. The computed wall pressure and wall heat transfer coefficients exhibit good general agreement with previous computations by other investigators and with experiments.     

NESTED GRID METHODS FOR AN OCEAN MODEL: A COMPARATIVE STUDY

In this paper a comparison is carried out between three correction methods for multigrid local mesh refinement in oceanic applications: FIC, LDC and the direct method (DM) proposed by Spall and Holland. This study is based on a nested primitive equation model developed by Laugier on the basis of the code OPA (LODYC). The external barotropic problem is solved using any of the three local grid correction algorithms yielding an interactive nested grid model. The non-linear elliptic equation for the barotropic streamfunction tendency is solved on two nested grids, called the global and the zoom grid, that interact between themselves. The zoom grid is entirely embedded within the global domain with a horizontal grid step ratio of 3:1. The computation on the global grid supplies the boundary conditions for the zoom grid region and the fine grid fields are used to correct the global coarse solution. The three local correction methods are tested on two problems relevant to oceanic circulation phenomena proposed by Spall and Holland: a barotropic modon and an anticyclonic vortex. The results show that the nesting technique is a very efficient way to solve these problems in terms of a gain in precision compared with the required CPU time. The two-domain model with local mesh refinement allows one both to manage effectively the open boundary conditions for the local grid and to correct the global solution thanks to the zoom solution. In the case of the modon propagation the three local correction methods provide approximately the same results. For the baroclinic vortex it appears that the two iterative methods are more efficient than the direct one.     

Capillary zone electrophoresis with UV-scanning detection for the analysis of metal species and their organic binding partners in biological systems

A capillary zone electrophoretic method with UV-scanning detection for the separation and identification of both free ligands and metal species is presented. The electrophoretic behavior of naturally occurring binding partners such as organic acids and amino acids was studied and compared with their metal-complexes. Copper(II) complexes of citrate and amino acids showed decreased electrophoretic mobilities and altered UV spectra. The optimized method was validated on ultrafiltered cow's milk and human milk samples. In cow's milk six low molecular weight substances, including citrate, orotate, and hippurate, could be separated. Metal supplementation with Cu(II), Ni(II), or Zn(II) decreased not only the citrate peak but also the orotate signal and in the case of copper(II) supplementation a new signal for the copper(II)-citrate complex appeared. In human milk samples various amino acids such as glutamate, phenylalanine, tyrosine, and tryptophan could be identified besides citrate. The electrophoretic mobilites and peak areas of the amino acids were also influenced by the metal supplementation.