硅锗合金Seebeck系数影响因素的研究

作为一种洁净能源,硅锗合金的热电转换性能的研究越来越受到人们的重视.本文重点研究了不同Ge浓度的硅锗合金以及Si、Ge单晶在300～1100K温度范围内,Seebeck系数随温度的变化.并对组分相同导电类型不同、晶向不同以及结晶状态不同的样品的Seebeck系数进行了比较.在研究温度区间,Seebeck系数的绝对值大小一般在200～600μV/K之间,随温度不同连续变化.通过对比发现SiGe合金的Seebeck系数大小不仅与Ge的浓度和温度有关,其他因素对其绝对值也有影响,其中晶向最为明显,表现出了明显的各向异性.此外,材料本身的电阻率除了作为一个热电参数影响最优值外,其大小还对Seebeck系数的绝对值有影响,即掺杂济浓度对Seebeck系数的影响.     

VOCs催化燃烧整体式催化剂及涂层材料研究进展

催化燃烧法是当前处理VOCs最具有发展前景的技术之一,其技术的关键在于催化剂。整体式催化剂具有优异的传质、良好的热稳定性、高比表面积、床层压降低、催化效率高、机械性能好、易于装卸和维修等特点,是目前实现工业VOCs治理最佳的催化剂。本文概述了用于VOCs催化燃烧反应的整体式催化剂及其涂层材料的研究现状,并展望了未来的发展趋势。     

Improvement of Biological Effects of Root-Filling Materials for Primary Teeth by Incorporating Sodium Iodide

Therapeutic iodoform (CHI₃) is commonly used as a root-filling material for primary teeth; however, the side effects of iodoform-containing materials, including early root resorption, have been reported. To overcome this problem, a water-soluble iodide (NaI)-incorporated root-filling material was developed. Calcium hydroxide, silicone oil, and NaI were incorporated in different weight proportions (30:30:X), and the resulting material was denoted DX (D5~D30), indicating the NaI content. As a control, iodoform instead of NaI was incorporated at a ratio of 30:30:30, and the material was denoted I30. The physicochemical (flow, film thickness, radiopacity, viscosity, water absorption, solubility, and ion releases) and biological (cytotoxicity, TRAP, ARS, and analysis of osteoclastic markers) properties were determined. The amount of iodine, sodium, and calcium ion releases and the pH were higher in D30 than I30, and the highest level of unknown extracted molecules was detected in I30. In the cell viability test, all groups except 100% D30 showed no cytotoxicity. In the 50% nontoxic extract, D30 showed decreased osteoclast formation compared with I30. In summary, NaI-incorporated materials showed adequate physicochemical properties and low osteoclast formation compared to their iodoform-counterpart. Thus, NaI-incorporated materials may be used as a substitute for iodoform-counterparts in root-filling materials after further (pre)clinical investigation.     

磁致伸缩材料弱磁场响应特性的实验研究

针对磁致伸缩材料在弱磁场传感器领域的应用需要,采用迈克耳逊干涉原理实验测量了零应力条件下Tb-Dy-Fe材料和Fe-Ga合金的磁场响应灵敏度,以及不同应力下Fe-Ga合金的磁场响应特性和温度响应特性.实验结果表明：在零应力,外加磁场16 mT条件下,Fe-Ga合金的磁场响应灵敏度远高于Tb-Dy-Fe材料,更合适作为弱磁场传感器敏感材料;同时,在1.2 MPa预应力和26 mT偏置磁场下,Fe-Ga合金材料具有较好的磁场响应灵敏度和较大的饱和磁致伸缩系数,因而处在最佳工作状态.所得到的材料的磁场和温度响应曲线可作为弱磁场传感器参量设计的参考依据.     

一种蓝色聚合物激光材料

聚合物作为一种有机发光材料,由于在平板显示和光电子器件中的良好应用前景而受到广泛研究［１～２］．近年来,一个重要进展是在聚合物中观测到了受激发射（简称Ｐｏｌｙ－ｍｅｒ激光）现象［３～６］．Ｐｏｌｙｍｅｒ激光最早是在溶液中实现的［３～４］．作为一种新型...     

自悬浮定向流法制备纳米铜微粒及其结构表征

采用自悬浮定向流法制备金属铜纳米微粒,并用TEM,XRD和AES等分析手段研究了铜纳米微粒的形貌、粒度、结构及其表面氧化层特性。结果表明,在一定的参数条件下采用自悬浮定向流法可制备出单晶纳米铜微粒,并且通过工艺参数的调控可达到对微粒粒度的控制。     

含氧空位的氟掺杂二氧化锰助力稳定锌离子电池

将无机盐NH₄F加入到MnO₂的前驱体溶液中,通过高效、简单的一步水热法制备了具有氧缺陷的F掺杂α-MnO₂纳米棒(记为F-MnO₂)。氧空位和F掺杂对提高F-MnO₂的导电性、促进离子扩散、提高倍率性能起着至关重要的作用。另外,由于F掺杂,形成了F—Mn键,这可以有效地抑制放电产物中Mn³⁺的Jahn-Teller畸变,从而提高结构的稳定性。得益于这些协同效应,组装的Zn||F-MnO₂全电池在0.5 A·g^-1下,首圈放电比容量高达274 mAh·g^-1,且具有较长的循环寿命和优异的倍率性能。同时,通过循环伏安(CV)和恒流充放电(GCD)曲线证明了F-MnO₂的储能机制为H⁺和Zn²⁺的共嵌入/脱出过程。     

Synthesis and Properties of Novel Luminescent Compounds Containing Triphenylamine and Bipyridine Units

Blue luminescent compounds T1-T4 containing triphenylamine donors,bipyridine acceptors and olefinic linkers were synthesized and characterized by 1H NMR,13C NMR and high resolution mass spectrometry(HR...     

Domain sensitivity for singular elliptic problems: Harmonic transformation approach

A method for computing the sensitivities of functionals depending on the solutions of elliptic equations defined over variable domains is presented. It is based on the material derivative approach and allows the uniform treatment of both singular and nonsingular cases. The novelty consists in defining the vector field connected with the domain transformation as the solution of an auxiliary elliptic equation. Such a choice does not restrict the range of admissible goal functionals and has many advantages from the numerical point of view. It allows one also to consider singular domain variations.