Incorporating ergonomic risks into assembly line balancing

In manufacturing, control of ergonomic risks at manual workplaces is a necessity commanded by legislation, care for health of workers and economic considerations. Methods for estimating ergonomic risks of workplaces are integrated into production routines at most firms that use the assembly-type of production. Assembly line re-balancing, i.e., re-assignment of tasks to workers, is an effective and, in case that no additional workstations are required, inexpensive method to reduce ergonomic risks. In our article, we show that even though most ergonomic risk estimation methods involve nonlinear functions, they can be integrated into assembly line balancing techniques at low additional computational cost. Our computational experiments indicate that re-balancing often leads to a substantial mitigation of ergonomic risks.     

无约束优化的一个充分下降共轭梯度算法

在修正PRP共轭梯度法的基础上,提出了求解无约束优化问题的一个充分下降共轭梯度算法,证明了算法在Wolfe线搜索下全局收敛,并用数值实验表明该算法具有较好的数值结果.     

A study on densities of sets of points and lines

In this paper, firstly, our purpose is to give the relationship among the densities of the sets of collinear points, the relationship among the densities of the sets of noncollinear points, and the relationship among the densities of the sets of the intersecting lines in Euclidean plane, respectively. In addition to that, we define the density formulas for the sets of points and lines under the two‐parameter planar Euclidean motion. By means of these results, we obtain essential properties that explain the connection among the densities of the sets of points and among the densities of the sets of intersecting lines under the two‐parameter planar Euclidean motion.     

光纤传能的移动式激光诱导击穿光谱钢铁快速检测与分类

为了实现工业现场对特种钢材的快速检测与种类识别,采用基于光纤传能的移动式激光诱导击穿光谱（LIBS）样机对14种特种钢材进行光谱数据的采集与分析,采用预选谱线并遍历组合的降维方法与支持向量机(SVM)相结合的算法对特钢材料的光谱进行快速分类。分别将原始光谱数据、归一化处理后的光谱数据、归一化处理+遍历组合优选谱线数据作为SVM分类模型的输入向量,并对比了不同输入向量下模型对特钢识别的准确度。结果表明：在事先选出的51条特征谱线作为输入变量的基础上,归一化光谱数据作为SVM分类模型的输入特征时,识别准确度达到95.71%,明显高于使用原始光谱数据作为输入向量时SVM分类模型的准确度11.43%。进一步地,使用MATLAB程序遍历谱线组合,通过遍历各种谱线组合选出最优的输入谱线组合,当优选6条特定的谱线时,对特钢种类识别的准确度达到100%,且建模速度也有相应提升。可以看出,当预选出大量常见特征数据时,机器自动选取特征与人工挑选谱线相比,具有明显优势,基于此降维方法的SVM算法模型在LIBS快速分类技术中具有很好的工业应用前景。     

Optical microstrip patch antennas design and analysis

This paper has presented transparent conductor oxide materials (TCOMs) based microstrip patch antennas with glass substrate and copper ground plane, which have been deeply analyzed in the visible spectrum region in comparison with the practical patch antenna model of indium tin oxide patch with glass substrate and different TCOMs based ground plane. As well as the study have investigated the effect of transparent oxide materials on patch antenna design instead of perfect conductor materials such as copper that has low cost and weight. The tradeoff between optical transparency and electrical conductivity will be evaluated for a range of visible regions. Microstrip transmission line feed method is used to predict the skin effects on a patch antenna and their impact on antenna efficiency, resonance frequency and optical transmission are also described. This study have discussed assessment of these tradeoffs and effect of TCOMs parameters on antenna design.     

Effect of Opacity on the Solar Spectral Line of C I 165.7 nm by Escape Factor Treatment

In this article, we report that by using the intensity ratio of the (2-2) to (1-2) component of CI emission lines at about 165.7 nm, we determined the optical depth at the line center of the (2-2) component of CI emission lines by escape factor treatment. The optical depth at the line center of the (2-2) component is calculated to be 0.9998, which is a more reasonable value of solar spectral lines than the value that has been reported. The variation of the optical depth at the line center for different positions from the solar limb is discussed. Using the measured abundance of carbon and the results of ionization balance calculations, we estimate the electron density in the CI emitting region. The density of hydrogen is estimated in the CI emitting region by this method, and is testified to be a better value than the value that has been reported. This discussion will be significant in the analysis of opacity on the solar ultraviolet (UV) or extreme-ultraviolet (EUV) spectrum.     

结直肠癌细胞株及细胞核的傅里叶变换红外光谱研究

运用傅里叶变换红外光谱技术研究了正常组织(30例)和细胞株(SW 620),正常细胞核和癌变细胞核的红外光谱特征,为红外光谱诊断结直肠癌奠定了细胞及亚细胞水平的实验基础。将所得光谱图的峰位及峰强比进行统计分析发现:细胞株(SW 620)和癌变细胞核中谱带(2 925,1 240和1 085cm-1)的峰位均向高波数移动(p<0.05),而谱带1 400cm-1的峰位均向低波数移动(p<0.05);细胞株(SW 620)中峰强比(I1 650/I1 460,I1 400/I1 460,I1 240/I1 460,)较正常组织升高(p<0.05),而I1 740/I1 460则降低(p<0.01)。癌变细胞核中(I1 650/I1 460,I1 400/I1 460,I1 240/I1 460)较正常细胞核亦升高(p<0.05).这些差异可作为区别组织良恶性的指标。     

基于电缆-无线耦合的随钻测井信号传输新方法及其数值模拟研究

信号传输是随钻测井的重要组成部分, 也是随钻测井进一步发展的瓶颈.针对这个问题, 研究了由Novatek^TM提出的基于钻杆内有线传输, 钻杆间电磁耦合传输的随钻信号高速传输方法.首先, 针对钻杆间的电磁耦合结构的对称性, 采用了高效的数值模式匹配法对该耦合结构进行了电磁建模; 然后, 为了优化钻杆间耦合结构的耦合性能, 利用上述的电磁建模方法对该耦合结构进行了仿真分析, 分析了该耦合结构各个参数对耦合性能的影响, 并得出了一些有意义的结论, 该结论能够指导随钻测井信号钻杆间耦合传输的优化设计.另外, 钻杆内传输线利用矩形传输线设计, 设计出了50 Ω 特性阻抗的矩形传输线, 并计算了相关损耗.最后, 通过仿真和实验验证了优化设计的钻杆间耦合传输结构具有非常好的传输性能, 并且仿真和实验结果符合良好. 关键词： 随钻信号传输 数值模式匹配 电磁耦合 矩形传输线