Interaction of Short Laser Pulses in Wavelength Range from Infrared to X‐ray with Metals,Semiconductors, and Dielectrics

Laser‐matter interaction is defined by an electronic band structure of condensed matter and frequency ω_L of electromagnetic radiation. In the range of moderate fluences, the energy absorbed by electrons from radiation finally thermalizes in the ion thermal energy. The thermalization processes are different for optical as compared with X‐ray quanta and for metals relative to semiconductors and dielectrics, since the light absorption and electron‐electron, electron‐ion dynamics are sensitive to the electron population in a conduction band and the width of a forbidden gap. Although the thermalization processes are different, the final state is simply a heated matter. Laser heating creates powerful stresses in a target if duration of a laser pulse τ_L is short in acoustic time scale. Nucleation and material removal take place under such stresses. Such way of removal is called here the spallative ablation. Thus the spallative ablation is an ablation mechanism universally important for qualitatively different materials and quanta (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A narrow-linewidth continuous wave Ho：YAL03 laser with Fabry-Perot etalons

A narrow linewidth continuous wave Ho：YAP laser with two Fabry-Perot etalons pumped by a Tm：YLF laser is reported. The maximum output power reaches 8.3 W when the incident pump power is 15.8 W, with 52.5% optical-to- optical conversion efficiency and 62.6% slope efficiency. A stable laser output at 2118.1 nm is achieved, with a linewidth less than 0.4 nm （full width at half maximum）. The beam quality factor is M2- 1.25, measured by the traveling knife-edge method.     

Nonstoichiometric laser materials: Designer wavelengths in neodymium-doped garnets

The tunable nature of lasers provides for a wide range of applications. Most applications rely on finding available laser wavelengths to meet the needs of the research. This article presents the concept of compositional tuning, whereby the laser wavelength is designed by exploiting nonstoichiometry. For research where precise wavelengths are required, such as remote sensing, this is highly advantageous. A theoretical basis for the concept is presented and experimental results in spectroscopic measurements support the theoretical basis. Laser operation nicely demonstrates the validity of the concept of designer lasers.     

Study on hydrogen sulfide plasma passivation of 790-nm laser diode cavity surface

In order to improve the optical properties of the Ⅲ-Ⅴ laser diodes(LDs) by means of H2S plasma passivation technology,H2S plasma passivation treatment is performed on the GaAs(110) surface.The optimum passivation conditions obtained are 60-W radio frequency(RF)power and 20-min duration.So the laser cavity surfaces axe treated under the optimum passivation conditions.Consequently,compared with unpassivated lasers with only AR/HR-coatings,the catastrophic optical damage (COD) threshold value of the passivated lasers by H2S plasma treatment is increased by 33%,which is almost the same as that of (NH4)2Sx treatment.And the life-test experiment has demonstrated that this passivation method is more stable than(NH4)2Sx solution wet-passivated treatment.     

Stable anticipation synchronization in mutually coupled vertical-cavity surface-emitting lasers system

Two vertical-cavity surface-emitting lasers(VCSELs) are mutually coupled through a partially transparent mirror (PTM) placed in the pathway. The PTM plays the role of external mirror,which controls the feedback strength and coupling strength.We numerically simulate this system by establishing a visible SIMULINK model.The results demonstrate that the anticipation synchronization is achieved and it can tolerate some extent frequency detuning.Moreover,the system shows similar chaos-pass filtering effect on unidirectionally coupled system even both VCSELs are modulated.This system allows simultaneously bidirectional secure message transmission on public channels.     

Synchronization and coherent combining of two pulsed fiber lasers

We demonstrate a scalable architecture for coherent combining of pulsed fiber lasers.A new method for generating synchronous pulsed fiber lasers by direct phase modulation is proposed and investigated.It is shown that phase modulated mutually coupled laser array can be a steady synchronous pulsed fiber laser source.The synchronous pulsed fiber lasers are coherently combined with an invariable phase difference of π in adjacent lasers.Neither active phase control nor polarization control is taken in our experiment.     

III–V based-semiconductor photonic crystals

Three-dimensional (3D) and two-dimensional (2D) photonic crystals based on III–V semiconductors are described. On the 3D photonic crystals, the development of complete photonic crystals at optical wavelengths and their applications to ultrasmall optical integrated circuits including 3D sharp bend waveguide are described. On the 2D photonic crystals, two-unique device and/or phenomena are demonstrated.     

InGaAsSb/AlGaAsSb长波长多量子阱激光器有源区的优化设计

系统地研究了波长为2.7μm的InGaAsSb/AlGaAsSb多量子阱激光器中有源区的优化设计.分别用含应变势的6带KP模型和抛物带模型计算价带和导带的能带结构，并得到薛定谔方程和泊松方程的自洽解，由此计算量子阱在载流子注入时的增益谱.研究表明制约量子阱增益的主要因素不是跃迁矩阵元，而是粒子数反转程度，尤其是空穴填充HH1子带的概率.增加压应变或减小阱宽都会提高量子阱增益.前者降低了价带HH1子带空穴的平面内有效质量；后者拉大了价带子带间距，尽管它同时略微增加了空穴有效质量.这两种因素都导致价带顶空穴态     

Continuous wave laser wavelength measurement using the travelling Michelson interferometer

The general design, operating principles, and accuracy limitations of cw laser wavemeters based on the Michelson interferometer are discussed. Device construction and operating practicalities are illustrated by reference to an automatic system built to monitor the wavelength of a Coherent 599-21 single-mode dye laser.