Plastic deformation kinetics for glassy polymers and blends

Measurements of the plastic deformation kinetics for several glassy (PS, PC, PI-polyimide, PET, epoxy-amine network), semi crystalline polymers (PBT, PET) and blends (ABS, PC:ABS, PC: PBT) were performed for the unidirectional compression loading conditions by using constant temperature deformation calorimetry. The experiments have permitted us to follow the changes of the mechanical work (A), the heat of deformation (Q) and differences between these quantities, i.e., internal energy (U) stored in samples during their loading and unloading. Experiments have shown that the large portion (45–85%) of the mechanical work of deformation (A) is converted to heat (Q). The rest ofA is converted to internal energy (U) stored in deformed samples. U is quite high as compared with metals [1,2]. After complete unloading of plastically deformed samples, i.e., samples carrying irreversible atT _def plastic deformation ( _irr ), some amount (U) of stored energy disappeared. The amount of (U and (U) are different for different polymers. All data are analyzed in the framework of the model proposed in [3,4]. The experiments support the deformation model where the plasticity of glassy polymers is the process of nucleation and development of so-called PDs-plastic local shear defects of nonconformational and nondilatational nature.Dedicated to Prof. Dr. W. Pechhold on the occasion of his 60th birthday     

Coordination around thorium(IV) in aqueous perchlorate,chloride and nitrate solutions

The coordination around the thorium(IV) ion in aqueous perchlorate, chloride and nitrate solutions has been determined from large angle X-ray scattering measurements. In perchlorate solutions, where inner-sphere complexes are not formed, the first coordination sphere contains 8.0±0.5 water molecules with Th-H₂O bond lengths of 2.48₅ Å. In chloride solutions inner-sphere complexes are formed, which lead to an increase in the coordination number. In nitrate solutions the nitrate ions are bonded as bidentate ligands to the thorium ion. The bond lengths are similar to those found in crystalline hydrates of thorium nitrate. The coordination numbers found for thorium(IV) in solution are compared with previously reported values for lower charged ions of similar size.On leave from Department of Inorganic Chemistry Royal Institute of Technology S-10044 Stockholm Sweden     

Density functional calculations of large systems containing heavy elements by means of the regionalization algorithm

The compounds containing transition metals orother heavy elements play important roles in chemistry.They possess diverse properties which have been util-ized in numerous functional materials. Some of theseproperties are also involved in biological processes.However, it is very difficult to study these compoundsdeeply by means of quantum chemical methods, be-cause in these systems usually there are a large amountof electrons, the distribution of the frontier orbitals isdense, the correlation be…     

高质量AlPO4-5分子筛单晶的螯合剂法合成与表征

考察了几种螯合剂对AlPO4-5分子筛单晶合成的影响，结果表明，用邻苯二酚，乙酰丙酮，水杨醛为螯合剂可以得到高质量的，尺寸较大的分子筛单晶，其作用机理可能与它们加入到分子筛合成体系中，改变了溶胶中铝的配位数或产生了铝的螯合物有关。     

On the deformation mechanisms of oriented PET and PP films under load

Uniaxially orienred semicrystalline poly(ethylene terephthalate) (PET) and poly(propylene) (PP) films were loaded parallel to draw direction at various temperatures. Changes in the submicroscopical structure of the films under load were examined by small and wide-angle x-ray scattering (SAXS; WAXS) and birefringence measurements. WAXS measurements reveal a decrease of the initial high orientation of the chains in the crystallites during deformation. Simultaneously, an increase of the birefringence was detected, indicating an orientation of chains in the amorphous regions. The alteration of the long period reflections in the SAXS patterns give strong evidence that lamellar stacks with different orientation angles according to load direction are present. Depending on the orientation of stacks, the contribution of lamellar separation to sample deformation alters, giving rise to different amounts of density changes in the stacks. Absolute intensity measurements of SAXS using a Kratky apparatus reveal that lamellar separation occurs preferentially below or in the range of the glass-transition temperature at small strain. With increasing strain and temperatures above the glass-transition slip deformation mechanisms become more important. The formation of microvoids was observed at strain near to elongation at break below or in the range of glass-transition temperature.     

硅氧烷乳液聚合过程中大颗粒形成机理的研究：Ⅱ.聚硅氧烷乳液的耐酸碱…

研究了阴离子型与阳离子型聚硅氧烷乳液的耐酸碱稳定性，发现阴离子型乳液对酸碱都相当稳定，在乳液制备过程中，酸性催化剂不会引起乳液颗粒的凝聚；而阳离子型乳液的耐酸三稳定性性差，尤其是引起乳液颗粒慢速凝聚的碱浓度下限值很低，碱是制备阳离子型乳液的化剂，碱引起乳液颗粒的慢速凝聚是阳离子型乳液中大颗粒形成的主要原因，在乳液聚合过程中所发生的相当部分的乳化剂从水相向有机硅相的转移也是影响阳离子型乳液稳定性的一     

MEASUREMENTS OF CHAIN INTERPENETRATION OF POLYMER GLASSES

The concept of entanglement provides the basis of our current understanding of the flow behavior of polymer melts, Current techniques developed to investigate the degree of interpenetration of polymer chains only provide indirectly the information of the degree of entanglement in a relatively large scale （several to tens of nanometer）. In this article, we report ^1H-NMR spectroscopy with dipolar filters under fast magic angle spinning for probing chain interpenetration of polymer glasses at the molecular level.     

Optimization of the electrophoretic deposition of YBa2Cu3O7−x superconducting large area coatings

Large area coatings (>10cm²) of the high temperature superconductor YBa₂Cu₃O_7–x (x = 0.1 – 0.2) (YBCO) have been prepared by scale up an electrophoretic deposition technique using silver sheets and Si-wafers coated with Ag or Au as substrates. Several parameters, like the kind of the solvent, the applied voltage, the distance between the electrodes, the initial concentration of the suspension and the temperature during the electrophoresis were investigated in order to attain high deposition rates, as well as uniform YBCO coatings with the proper stoichiometry. To obtain a strongly adherent and dense coating a subsequent appropriate sintering and annealing procedure has been developed. The coatings obtained were characterized for their stoichiometry and superconducting properties by X-ray diffraction (XRD), Raman spectroscopy and magnetic measurements. The homogeneity and thickness of the films and the average grain size of the deposited particles have been investigated by optical and scanning electron microscopy (SEM).     

NLO‐active maleimide copolymers with ­high glass transition temperatures

We synthesized some novel rigid NLO‐active maleimide copolymers bearing DR‐1 moieties ( PMPD , PHSD and PHND ). All copolymers exhibited high T_g's (190～197 °C), good solubilities for common solvents and excellent film‐forming properties. Dependence of film thickness on the d₃₃ value for the poled copolymer films induced by corona poling was investigated and it was demonstrated that in less than thickness of 0.3 µm decrease of the thickness gives rise to remarkable increase in the d₃₃ value. The poled copolymer films exhibited large d₃₃ values (270 × 10^?9 esu (film thickness 0.13 µm) for PMPD , 290 × 10^?9 esu (0.12 µm) for PHSD and 350 × 10^?9 esu (0.08 µm) for PHND ) as well as large r₃₃ values (51.0 pmV^?1 for PMPD and 60.4 pmV^?1 for PHND ) which are significantly large compared to the value of LiNbO₃ (31 pmV^?1) as a typical EO material. The d₃₃ values of the poled copolymers were kept constant even after standing 1000h at 80 °C, although a small decrease was observed at an initial stage. Further, the d₃₃ values did not change up to ca. 123 °C upon heating at the rate of 10 °C/min in all cases. Copyright © 2002 John Wiley & Sons, Ltd.     

Determination of various deformation processes in impact-modified PMMA at strain rates up to 105%/min

The deformation processes in impact-modified PMMA, which deforms homogeneously, were determined by means of the stress/strain experiment (, ) with simultaneous lateral strain measurement (_lat) in a wide range of strain rates () up to 10⁵%/min (impact stress). The elastic, plastic cavitation and plastic shear processes were determined as a function of strain. Therefore we calculated the elastic strain ( _el), the elastic volume expansion ( _{vol el}), the cavitation strain ( _cav), which is identical with the plastic volume expansion ( _{vol pl}), the shear strain ( _sh) and the energy densities (W_el, W_cav, W_sh) related to these three processes.For strains of 3 % onward it was found that plastic shear processes and plastic cavitation processes are responsible for a partial loss of elastically stored energy. Both plastic processes turn out to be mostly anelastic deformations, their amount depending strongly on the strain rate. The contributions of the processes to the total deformation of the unmodified PMMA in its strain range are similar to those of the impact-modified PMMA, and the high impact strength is caused by a shift of the catastrophic rupture to very high strains.