Viscous potential flow analysis of Kelvin-Helmholtz instability with mass transfer and vaporization

Viscous potential flow analysis of Kelvin-Helmholtz instability with heat and mass transfer has been studied. A dispersion relation has been obtained. Stability criterion is given by a critical value of relative velocity. It has been found that heat and mass transfer has destabilizing effect on relative velocity when lower fluid viscosity is low while it has stabilizing effect when lower fluid viscosity is high. Various graphs have been plotted for relative velocity and growth rate. In statically unstable situation viscosity has stabilizing effect while in statically stable situation it has destabilizing effect.     

Long-memory in an order-driven market

This paper introduces an order-driven market with heterogeneous investors, who submit limit or market orders according to their own trading rules. The trading rules are repeatedly updated via simple learning and adaptation of the investors. We analyze markets with and without learning and adaptation. The simulation results show that our model with learning and adaptation successfully replicates long-memories in trading volume, stock return volatility, and signs of market orders in an informationally efficient market. We also discuss why evolutionary dynamics are important in generating these features.     

Nano liquid-metal fluid as ultimate coolant

We proposed for the first time the concept of the nano liquid-metal fluid, aiming to establish an engineering route to make the highest conductive coolant. Using several widely accepted theoretical models for characterizing the nano fluid, the thermal conductivity enhancement of the liquid-metal fluid due to addition of more conductive nano particles was predicted. Further, the effects of particle size, cluster of nano particle, solid-like layer due to adsorption, volume fraction and particle types were evaluated. Having the highest conductivity, being electromagnetically drivable, the liquid metal with low melting point is expected to be an idealistic base fluid for making super conductive solution which may lead to the ultimate coolant in a wide variety of heat transfer enhancement area.     

管内变密度流体的充分发展流动与换热

本文提出了圆管内变密度流体流动与换热充分发展的概念及其相关假设.在所提出的概念和假设基础上给出了摩擦阻力系数Cf与Nusselt数Nu的定义式和计算式.通过对圆管内密度随温度变化的氩气的流动与换热所进行的数值模拟,验证了在本文的计算条件范围内,圆管内变密度流体充分发展流动与换热的概念是合理的,并且CfRe=16,Nu=4.36.     

膜蒸馏装置热容腔流场数值模拟的可行性分析

本文运用CFD软件,采用水作为工质,在第Ⅲ代膜组件基础上,对旋转切向入流空气隙膜蒸馏热容腔内的流场进行了模拟计算,通过数值模拟结果与实验数据的比较分析,验证了针对膜组件热容腔进行理论模拟所设置的物理模型和边界条件是符合实际的,理论模拟值和实验值的误差在20%范围内,其结果较为理想.     

Speckle interferometry methods for displacement and strain measurements using photorefractive crystal

Photorefractive crystals offer several attractive features such as high resolution and in situ processing. As the images are erasable, these crystals are suitable for read–write applications and hence find potential use in speckle photography, image processing and holography. The barium titanate (BaTiO₃) crystal as recording medium has been extensively used as a novelty filter for real-time in-plane displacement measurements employing two-beam coupling configuration. This paper presents new optical configurations in speckle shear photography to measure in-plan displacement and the strain in real time using BaTiO₃ crystal as recording medium. Speckle photography studies are made using a simple two-beam coupling configuration. In speckle shear photography, a diffused object illuminated with two parallel narrow laser beams is imaged inside the crystal, and a pump beam is added at this plane. The speckle patterns due to each beam and the pump beam produce index gratings. When the object is deformed, the speckle patterns shift consequently. We now have four speckle fields: two generated from the interaction of pump beam with the index gratings and two pertaining to deformed states directly transmitted through the crystal. Thus, the fields from respective points on the object interfere after passage through the crystal and produce the Young's fringe patterns. Due to strain, the fringes in each pattern are of different width and orientation, resulting in the generation of a Moiré pattern. The strain is obtained from the width and orientation of the fringes in the Moiré pattern. The experiments are conducted on a specimen with a notch, which is subjected to tensile loading. The in-plane displacement is measured separately in another experiment. The above studies are carried out at Nd–Yag laser.     

Effects of fine fuel droplets on a laminar flame stabilized in a partially prevaporized spray stream

A partially prevaporized spray burner was developed to investigate the interaction between fuel droplets and a flame. Monodispersed partially prevaporized ethanol sprays with narrow diameter distribution were generated by the condensation method using rapid pressure reduction of a saturated ethanol vapor–air mixture. A tilted flat flame was stabilized at the nozzle exit using a hot wire. Particle tracking velocimetry (PTV) was applied to measurements of the droplet velocity; the laminar burning velocity was obtained from gas velocity derived from the droplet velocity. Observations were made of flames in partially prevaporized spray streams with mean droplet diameters of 7 μm and the liquid equivalence ratios of 0.2; the total equivalence ratio was varied. In all cases, a sharp vaporization plane was observed in front of the blue flame. Flame oscillation was observed on the fuel-rich side. At strain rates under 50 s⁻¹, the change in the burning velocity with the strain rate is small in fuel-lean spray streams. In spray streams of 0.7 and 0.8 in the total equivalence ratio, burning velocity increases with strain rates of greater than 50 s⁻¹. However, in spray streams with 0.9 and 1.0 in the total equivalence ratio, burning velocity decreases as the strain rate increases. At strain rates greater than 80 s⁻¹, burning velocity decreases with an increased gas equivalence ratio. The effect of mean droplet diameter, and the entry length of droplets into a flame on the laminar burning velocity, were also investigated to interpret the effect of the strain rate on the laminar burning velocity of partially prevaporized sprays.     

Visualization of flameholding mechanisms in a supersonic combustor using PLIF

Laser-induced fluorescence of OH and CH₂O was imaged to investigate the flame stabilization mechanism in a flameholder with a Mach 2.4 free stream. Ethylene was burned in a rectangular cavity with two points of injection: the aft wall and the cavity floor. When injected from the aft wall, the fuel came into immediate contact with hot combustion products from the reaction zone under the shear layer. Primary combustion occurred under the shear layer and in the aft region of the cavity volume. In contrast, when fuel was injected from the floor, a jet-driven recirculation zone of hot products near the upstream wall of the cavity served as a flameholder. The reaction then occurred on the underside of the shear layer. In conditions near lean blowout, significant changes in the flameholding mechanisms were observed. Improved CH₂O fluorescence signal was obtained by taking advantage of the long fluorescence lifetime at low pressures and delaying the camera gate to reduce the background signal.     

Combustion of bimodal nano/micron-sized aluminum particle dust in air

The combustion of bimodal nano/micron-sized aluminum particles with air is studied both analytically and experimentally in a well-characterized laminar particle-laden flow. Experimentally, an apparatus capable of producing Bunsen-type premixed flames was constructed to investigate the flame characteristics of bimodal-particle/air mixtures. The flame speed is positively affected by increasing the mass fraction of nano particles in the fuel formulation despite the lower flame luminosity and thicker flame zone. Theoretically, the flames are assumed to consist of several different regimes for fuel-lean mixture, including the preheat, flame, and post flame zones. The flame speed and temperature distribution are derived by solving the energy equation in each regime and matching the temperature and heat flux at the interfacial boundaries. The analysis allows for the investigation of the effects of particle composition and equivalence ratio on the burning characteristics of aluminum-particle/air mixtures. Reasonable agreement between theoretical results and experimental data was obtained in terms of flame speed. The flame structure of a bimodal particle dust cloud may display either an overlapping or a separated configuration, depending on the combustion properties of aluminum particles at different scales. At low percentages of nano particles in the fuel formulation, the flame exhibits a separated spatial structure with a wider flame regime. At higher nano-particle loadings, overlapping flame configurations are observed.     

200GeV AuAu碰撞中前快度区的微分椭圆流

Identified particle elliptic flow results are presented for the Au+Au reaction at s_NN=200GeV as a function of transverse momentum and pseudorapidity. Data at pseudorapidities η≈0,1, and 3.4 were obtained using the two BRAHMS spectrometers. Differential v₂ (η,p_t) values for a given particle type are found to be essentially constant over the covered pseudorapidity range, in contrast to the integral v₂ values which have previously been observed to decrease at forward rapidities. A softening of the particle spectra at forward angles is found to account for at least part of the integral v₂ falloff. The data are found to be consistent with existing constituent quark scaling systematics.