High temperature corrosion behaviour of M(Co,Ni)CrAIY-coatings on high temperature materials-microanalytical investigations

In our former investigations, the phenomenon high temperature corrosion (HTC) was described exemplarily on selected materialcoating combinations for blades of stationary gas turbines, mainly in the temperature region of up to 750° C. To answer the question, in which manner higher gas inlet and/or higher material surface temperature would influence the HTC behaviour, a special analytical technique—the integral layer profile analysis—was introduced to ameliorate concentration profile methods. By examining IN 738 LC specimens with CoCrAlY plasma spray coating, stressed by hot gas at 900° C, the limits of this system are shown by explaining the corrosion mechanism; the method is also used for other systems, e.g. U 520 with NiCrAlY coating at 750° C.     

The chemiluminescence of dispiro(1,2-dioxetane-diadamantane) sorbed on silipore activated by a phenanthroline complex of Eu(iii)

The thermal decomposition of dispiro(1,2-dioxetane-diadamantane) (1) sorbed on silipore containing EuCl₃ ando-phenanthroline was investigated. The observed chemiluminescence is caused by radiative deactivation of EU^*(iii) formed according to an energy transfer mechanism. Chemiluminescence decay in the course of the decomposition of1 is exponential with the rate constantk. The activation parameters of the decomposition of1 sorbed on silipore were determined from the temperature dependence ofk. These parameters are independent of the Eu(iii) content. A kinetic compensating effect was found: the dependence of logA onE _a as a function of the content of1. The mechanism of the compensating effect is discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 447–451, March, 1995.     

Mass spectrometric study of thermal stability of copper(II) bis(dipivaloylmethanate) vapour

The processes of thermal destruction of copper(II) bis(dipivaloylmethanate) (Cu(dpm)₂) in the temperature range 150°–550°C were studied by using a two-temperature variant of a double chamber Knudsen cell, with mass spectrometric recording of the gas-phase composition. The temperature range of stability of the vapour of the complex in vacuum was determined, as were those of its mixtures with oxygen in different proportions. The temperature dependence of the rate constant of the thermolysis of (Cu(dpm)₂) vapour was obtained. The thermal stability of Hdpm vapour and the influence of oxygen on the thermolysis of the ligand were studied.

---

Zusammenfassung Unter Verwendung einer Zweitemperaturenvariante der Knudsenschen Doppelkammerzelle wurde mittels MS-Untersuchung der Gasphasenzusammensetzung im Temperaturbereich 150°–550°C der thermische Abbau von Kupfer(II)-bis(dipivaloylmethanat) (Cu(dpm)₂) untersucht. Es wurde der Temperaturbereich für die Stabilität der gasförmigen Komplexe in Vakuum sowie in Gemischen mit Sauerstoff in verschiedenen Verhältnissen bestimmt. Dabei wurde die Temperaturabhängigkeit der Geschwindigkeitskonstante für die Thermolyse von Cu(dpm)₂ ermittelt. Weiterhin wurde die thermische Stabilität von Hdpm-Dampf sowie der Einfluß von Sauerstoff auf die Thermolyse der Liganden bestimmt.

     

About compensation effect by thermal decomposition of some catalyst precursors

Summary In order to obtain catalysts, the thermal decomposition of the precursors is a compulsory step. However, kinetic analysis of the decomposition data obtained under non-isothermal conditions lead very seldom to the intimate reaction mechanism. There is also a lack of information because in non-isothermal kinetics, the compensation effect, is rather a rule and unfortunately a source of debate. In order to discriminate between these processes, and the influence of conversion, respectively temperature on the reaction rate, the NPK (non-parametric kinetic - Sempere and Nomen) method was used. This method is based on the singular value decomposition algorithm (SVD) applied on the matrix of reaction rate at corresponding conversion and temperature. This method allows a less speculative determination of the conversion functions and of the kinetic parameters.     

A kinetic stability study of MN (MBe,Mg, Ca,Sr, and Ba)

This work describes a structure and kinetic stability study of some complexes with the general formula MN, where M are the alkaline earth metal atoms, Be, Mg, Ca, Sr, and Ba. A complex (A) with two points of attachment to the N₅ ring is the most energetically favored for all metals considered here. Except for Be, structure (B) containing a mono‐coordinated metal atom is a transition state corresponding to the metal atom transfer around the N₅ ring. Pyramidal structure (C) is kinetically unstable with the low isomerization barrier height, ranging from 0.9 to 6.7 kcal/mol. The dissociation barrier heights for the lowest energy isomers (A) are predicted to be 1.2–18.7 kcal/mol (Be to Ba), indicating that kinetic stability increases from lighter to heavier metal atoms. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

Kinetic spectrophotometric determination of trace manganese (II) with dahlia violet in nonionic microemulsion medium

A new catalytic kinetic spectrophotometric method has been developed for the determination of trace amount of manganese (II) in nonionic microemulsion medium. The method is based on the catalytic effect of manganese (II) on the oxidation of dahlia violet by potassium periodate with nitrilotriacetic acid as an activitor in the presence of nonionic microemulsion. Under the optimum conditions, the calibration graph is linear in the range of 0.0004-0.0056 μg ml⁻¹ of manganese (II) at 580 nm. The detection limit achieved is 3.75×10⁻⁵ μg ml⁻¹. Manganese (II) in foodstuff samples was determined with satisfactory results.     

Kinetic resolution of heterocyclic amines by reaction with optically active acid chlorides. The effect of reaction conditions on the diastereoselectivity of acylation of (±)-3-methyl-2,3-dihydro-4H-1,4-benzoxazine

The influence of the reaction conditions (solvent, base) on the diastereoselectivity of acylation of (±)-3-methyl-2,3-dihydro-4H-1,4-benzoxazine with (S)-naproxen and N-tosyl-(S)-proline chlorides was studied. The highest diastereoselectivity was observed for the reaction carried out in benzene in the presence of aliphatic tertiary amines.     

Determination of trace rhodium by supramolecular catalytic kinetic spectrofluorimetry of β-CD-rhodium-KBrO3-vanillin salicylhydrazone

A sensitive catalytic kinetic spectrofluorimetric approach for determining ng mL⁻¹ levels of rhodium is presented, and the possible mechanism of the catalytic reaction was investigated. The determination is based on the catalytic property of rhodium to enhance the reaction of o-vanillin salicylhydrazone (OVSH) with potassium bromate in a water-ethanol medium at pH 4.80 and 45 °C. The presence of β-cyclodextrin (β-CD) obviously sensitized the assay due to its high inclusion ability towards OVSH. Under optimized experimental conditions, fluorescence measurements of the β-CD-rhodium-KBrO₃-OVSH catalytic kinetic reaction system were carried out in its fluorescent band centered at λ_ex = 333 nm and λ_em = 476 nm, respectively. The calibration graph was linear over the concentration range of 0.47–100 ng mL⁻¹ with a detection limit of 0.14 ng mL⁻¹. The effect of interferences was discussed, and the results show that the extraction method can be used to separate rhodium from interference species such as iridium. The proposed method, applied to several synthetic mixtures containing rhodium mixed with varying amounts of metal salts, produced satisfactory results.     

Optically clear simulataneous interpenetrating polymer networks based on poly(ethylene glycol) diacrylate and epoxy. II. Kinetic study

Simultaneous interpenetrating polymer networks (SINs) based on diglycidyl ether of bis-phenol A (DGEBA) and poly(ethylene glycol) diacrylate (PEGDA) in weight ratios of 100/0, 50/50, and 0/100 were blended and cured simultaneously by using benzoyl peroxide (BPO) and m-xylenediamine (MXDA) as curing agents. A kinetic study during SIN formation was carried out at 45, 55, 63, and 70°C. Concentration changes for both the epoxide and C?C bond were monitored with FTIR. A rate expression for DGEBA cure kinetics was established with a model reaction of phenyl glycidyl ether (PGE) and benzylamine. Experimental results revealed that lower rate constants and higher activation energy for the SIN were found, compared with those for the constituent DGEBA and PEGDA network formation. A model of network interlock was proposed to account for this phenomenon. During simultaneous cure of DGEBA and PEGDA, the interlock (mutual entanglement) between DGEBA and PEGDA networks provided a sterically hindered environment, which subsequently increased the activation energy and reduced cure rates for both DGEBA and PEGDA. © 1993 John Wiley & Sons, Inc.     

A simplified integral equation for adsorption of gas mixtures on heterogeneous surfaces

Summary The multiple integral representing the overall isotherm for adsorption of gas mixtures on heterogeneous surfaces is transformed to a single integral, which is promising for predicting the mixed-gas adsorption by means of single-gas adsorption parameters. This transformation is possible when the adsorption energies of components for various adsorption sites show a certain type of correlation.

---

Eine vereinfachte Integralgleichung für die Adsorption von Gasmischungen auf heterogenen Oberflächen

Zusammenfassung Das multiple Integral, das die Adsorption von Gasmischungen auf heterogenen Oberflächen darstellt, wurde zu einem einfachen Integral transformiert, das zur Voraussage der Adsorption von Gasgemischen mittels der Einzelgas-Adsorptionsparameter geeignet sein sollte. Diese Transformation ist dann möglich, wenn die Adsorptionsenergien der Komponenten einem bestimmten Korrelationstyp angehören.