A study of methylation of inorganic tin by iodomethane in an aquatic environment with 13C carbon isotope tracer technique

The methylation of tin(II) [Sn(II)] by iodomethane (CH₃I) under environmental conditions has been further demonstrated by a ¹³C carbon isotope tracer method. Methylation products are mainly monomethyltin, and very small amounts of dimethyltin. The reaction of Sn(II) and CH₃I was investigated at pH 2, 4, 6, 8, 10 and salinity (S) 8, 15, 22, 28, 35%; it has been found the reaction was affected by pH and salinity, the tin methylation activity being highest at about pH 6 and S = 28% . The methylation reaction is first-order for both CH₃I and Sn(II), and the rate equation has been obtained as follows: .     

Errors involved in the activation energy calculated by integral methods when the frequency factor depends on the temperature ( A = A 0 T m)

The dependence of the frequency factor on the temperature (A=A ₀ T ^m) has been examined and the errors involved in the activation energy calculated from some integral methods without considering such dependence have been estimated. Investigated integral methods are the Coats-Redfern method, the Gorbachev-Lee-Beck method, the Wanjun-Yuwen method and the Junmeng-Fusheng method. The results have shown that the error in the determination of the activation energy calculated ignoring the dependence of the frequency factor on the temperature can be rather large and it is dependent on x=E/RT and the exponent m.     

Enantioselective synthesis of tarchonanthuslactone via iterative hydrolytic kinetic resolution

A short and practical enantioselective synthesis of tarchonanthuslactone has been achieved in high diastereomeric excess using iterative Jacobsen’s hydrolytic kinetic resolution and ring closing metathesis as the key steps.     

Composting of urban solid residues (USR) by different dispositions

The thermal behavior and non-isothermal kinetics of thermal decomposition of three different kinds of composting of the USR like: stack with drilled PVC tubes (ST), revolved stack (SR) and stack with material of structure (SM), from the usine of composing of Araraquara city, Săo Paulo state, Brazil, within a period of 132 days of composting were studied. Results from TG, DTG and DSC curves obtained on inert atmosphere indicated that the cellulosic fraction present, despite the slow degradation during the composting process, is thermally less stable than other substances originated from that process. Due to that behavior, the cellulosic fraction decomposition could be kinetically evaluated through non-isothermal methods of analysis. The values obtained were: average activation energy, Ea=248, 257 and 259 kJ mol^-1 and pre- exponential factor, logA=21.4, 22.5, 22.7 min^-1, to the ST, SR and SM, respectively. From Ea and logA values and DSC curves, Málek procedure could be applied, suggesting that the SB (Šesták-Berggren) kinetic model is the appropriated one to the first thermal decomposition step. This revised version was published online in July 2006 with corrections to the Cover Date.     

Entropy evaluation using the kinetic method: is it feasible?

The kinetic method is one of the most widely used experimental techniques for the measurement of thermochemical parameters by mass spectrometry. Recently it has been realized that it can also be used to determine reaction entropies, but the validity of this approach has not been established. This Perspective evaluates kinetic method plots in cases where there is a significant entropy difference between the competing fragmentation channels (i.e. between sample and reference compounds in the dissociating cluster ion). The concept underlying this study is to calculate mass spectra theoretically, based on known thermochemical parameters and as a function of experimental conditions. This can be done accurately using the RRKM-based MassKinetics software. The resulting mass spectra are then interpreted by the kinetic method, yielding DeltaH and DeltaS values. These values are, in turn, compared with the true values used to generate the calculated mass spectra. The results show that the reaction entropy difference between sample and reference has a very large influence on kinetic method plots. This should always be considered when studying energy-dependent mass spectra (using metastable ions or low- or high-energy collision-induced dissociation (CID)), even if only DeltaH is to be determined. Kinetic method plots are not strictly linear and this becomes a serious issue in the case of small molecules showing a large entropy effect. In such cases, results obtained at a low degree of excitation are more accurate. Energy and entropy effects can be evaluated in a relatively straightforward manner: first, the apparent Gibbs energy (DeltaG(app)) and effective temperature (T(eff)) are determined from kinetic method plots (intercept and slope, respectively), obtained from experiments using various degrees of excitation. Second, the resulting DeltaG(app) is plotted against T(eff), the slope yielding DeltaS while the intercept (extrapolation to zero temperature) yields DeltaH. This data evaluation yields more accurate results than alternative methods used in the literature. The resulting DeltaH values are fairly accurate, with errors, in most cases, <4 kJ mol(-1). On the other hand, DeltaS is systematically underestimated by 20-40%. Empirically scaling DeltaS values determined by the kinetic method by 1.35 results in a DeltaS value within 20% (or 10 J mol(-1) K(-1)) of the theoretical value.     

Thermochemical Investigations of Calcium Carbonate Phase Transitions I. Thermal activated vaterite—calcite transition

The vaterite—calcite transition above 630 K has been studied by isothermal and non-isothermal differential scanning calorimetry. Vaterite samples prepared under different conditions were investigated. The transition temperature is strongly dependent on the sample preparation. The observed transition enthalpy H_tr is nearly equal for different samples and experimental conditions. From 28 measurements a value of H_tr–(3.12±0.11) kJ mol^–1 was obtained. The activation energy for the polymorphic transition was calculated from the Arrhenius plot and by use of isoconversional methods, as a function of the degree of conversion. The influence of the kinetic model distortion and experimental uncertainties on the obtained data was discussed. The actual value of the activation energy was assessed at E_a=(250±10) kJ mol^–1 for nearly all examined samples. Functions, corresponded to the model mechanism of nuclei formation and growth, provide the unambiguous consideration of the transition kinetic for the investigated vaterite samples. Differences in the dynamic behaviour of several samples at the transition are established.This revised version was published online in November 2005 with corrections to the Cover Date.     

催化动力学光度法测定痕量锆

研究了在弱酸性介质中，锆（Ⅳ）催化过氧化氢氧化铬蓝黑Ｒ这一新的指示反应及其动力学条件，建立了一种高灵敏、高选择性测定痕量锆的新方法，方法检出限为３．７４×１０－１１ｇ／ｍＬ，线性范围０～１．１μｇ／２５ｍＬＺｒ（Ⅳ）．用于合金钢中痕量锆的测定，结果满意．     

Simplistic modeling approach to heterogeneous dilute-acid hydrolysis of cellulose microcrystallites

The classic kinetic model for cellulose hydrolysis is often referred to as pseudo-homogeneous, a term revealing the insight that the process is actually heterogeneous. During the past 10–15 yr, the shortcomings of this model have been demonstrated in various studies and the interest in the heterogeneous aspects has increased. The present work presents a simplistic model in which the intrinsic, heterogeneous hydrolysis and transport rates are coupled by the assumption of a constant glucosidic surface concentration. The mechanisms affecting these two rates are largely unknown, but the model serves as a guideline for further exploration of the process.     

Adsorption of anionic dyes on chitosan beads. 1. The influence of the chemical structures of dyes and temperature on the adsorption kinetics

In this work, chitosan beads were synthesized in acidic medium and cross-linked in 1% glutaraldehyde solution. The characterization of the materials using TG/DTG, XRD, and BET surface areas showed that the beads did not modify their characteristics after the cross-linking reaction. The cross-linked beads were utilized as adsorbents for the removal of the yellow-, blue-, and red-anionic reactive dyes from aqueous solutions at pH 2.0. Adsorption of the yellow-dye increased from 25 to 50 degrees C. However, adsorption of the blue-dye decreased from 25 to 50 degrees C. Interestingly, the adsorption of the red-dye decreased from 25 to 35 degrees C and increased from 45 to 50 degrees C. The kinetic data were evaluated using an Avrami kinetic model, where the parameter n was related to the determination of changes in the adsorption mechanisms. Adsorption data of the dyes in relation to the contact time, the chemical structures of the dyes, and temperature were presented and were discussed.     

Kinetic Determination of Microquantities of Rutin by Perturbation of the Bray-Liebhafsky Oscillatory Reaction in an Open System

A kinetic method is described for the microquantitative (microconcentration/microvolume) determination of rutin based on potentiometric monitoring of the concentration perturbations of the Bray-Liebhafsky (BL) oscillatory reaction being in a non-equilibrium stationary state close to a bifurcation point. The experiments are carried out in an open reactor. The response of the matrix system to perturbations by different concentrations of rutin ethanolic solutions is followed by a Pt-electrode. In the concentration range between 7.8×10^–8moldm^–3 and 9.1×10^–6mol dm^–3, we found a linear dependence of the maximal potential shift, E_m, on the logarithm of the rutin concentrations. The unknown concentrations can be determined from the calibration curve up to an accuracy of ±5%. The detection limit is 3.6×10^–8mol dm^–3. The amount of required sample can be as small as 10µL.