A puzzle of the radio-quiet quasar PG 1407+265: Are optical and X-ray emissions produced from a relativistic jet?

PG 1407+265 is a radio quiet quasar that has a relativistic jet.In this report,we show some peculiar properties of its optical and X-ray emissions,which indicate possible non-thermal origins produced from the jet.We use a simple synchrotron + synchrotron self Compton (SSC) model to fit the emissions with different ratios of energy densities between the magnetic field and electrons (η≡U B/U e),which predicts a different γ-ray luminosity.The First LAT AGN Catalog (1LAC) did not include PG 1407+265,which indic...     

Reinvestigation of the ν2 + 2ν3 subband in the overtone icosad of 12CH4 using cavity ring-down (CRD) spectroscopy of a supersonic jet expansion

We report a detailed reinvestigation of the ν₂?+?2ν₃ combination band of methane ¹²CH₄ centred at (7510.3378?±?0.003)?cm^?1 ((225.154263?±?0.0001)?THz) within the icosad of the overtone absorption. A new experimental setup is described, allowing us to carry out cw-laser cavity ring-down spectroscopy (cw-CRDS) at instrumental resolution in the MHz range in seeded supersonic jet expansions down to rotational temperature of 7?K compared to previous cw-CRDS measurements in our group achieving about 50?K in expansions of neat CH₄. We provide a careful re-analysis on the basis of our new experimental results for the Q and R branch transitions including data obtained between about 7 and 300?K under various conditions. We resolve previously observed discrepancies of assignments and are able to present a definitive assignment for lines involving angular momentum quantum numbers up to J?=?4. The analysis of relative intensities in spectra taken at rotational and effective translational temperatures between about 50?K and less than 10?K indicate conservation of nuclear spin symmetry upon supersonic jet expansion, in agreement with previous results using other techniques and covering other spectral ranges.     

Dynamics of plasma channel in a parallel-plate plasma gun

Lumped parameter models for describing dynamics of the plasma channel in a parallel-plate plasma gun are compared with the experimental results obtained from two plasma guns with different rail geometries. Comparison between the experiments and the numerical calculations reveals that the lumped parameter models can be utilized to describe the dynamic motion of the plasma channel quite well. Parametric study shows that minimizing the line inductance and increasing the charging voltage on a capacitor as well as minimizing the gas injection time for reducing the mass of the plasma channel are the key factors to increase the flow velocity of the plasma jet ejected from the plasma gun.     

Experimental investigation of fully developed falling film flow in the presence of conduction pumps

Conduction pumping is appropriate way for liquid pumping due to its benefits like being noise free and easy controlling. In the present work fully developed falling film flow in the presence of conduction pumps has been experimentally investigated. Two different arrangements were selected and Transformer oil was used. Results indicated that, applying electric field would decrease thickness of falling film in wide range of Re number. The variation of wave's frequency and velocity regarding to Re number is also presented and compared for arrangements. Conduction pumps increased wave's frequency at low Re numbers conversely decreased it at high Re numbers.     

Pulsed microwave-driven argon plasma jet with distinctive plume patterns resonantly excited by surface plasmon polaritons

Atmospheric lower-power pulsed microwave argon cold plasma jets are obtained by using coaxial transmission line resonators in ambient air.The plasma jet plumes are generated at the end of a metal wire placed in the middle of the dielectric tubes.The electromagnetic model analyses and simulation results suggest that the discharges are excited resonantly by the enhanced electric field of surface plasmon polaritons.Moreover,for conquering the defect of atmospheric argon filamentation discharges excited by 2.45-GHz of continued microwave,the distinctive patterns of the plasma jet plumes can be maintained by applying different gas flow rates of argon gas,frequencies of pulsed modulator,duty cycles of pulsed microwave,peak values of input microwave power,and even by using different materials of dielectric tubes.In addition,the emission spectrum,the plume temperature,and other plasma parameters are measured,which shows that the proposed pulsed microwave plasma jets can be adjusted for plasma biomedical applications.     

Conformation‐Specific Circular Dichroism Spectroscopy of Cold,Isolated Chiral Molecules

The CD spectroscopy of a chiral compound in solution yields an average CD value derived from all of the conformations of a chiral molecule. By contrast, CD spectroscopy of cold chiral molecules in the gas phase distinguishes specific conformers of a chiral molecule, but the weak CD effect has limited the practical application of this technique. Reported herein is the first resonant two‐photon ionization CD spectra of ephedrines in a supersonic jet using circularly polarized laser pulses, which were generated by synchronizing the oscillation of the photoelastic modulator with the laser firing. The spectra exhibited well‐resolved CD bands which were specific for the conformations and vibrational modes of each enantiomer. The CD signs and magnitudes of the jet‐cooled chiral molecules were very sensitive to their conformations and thus offered crucial information for determining the three‐dimensional structures of chiral species, as conducted in combination with quantum chemical calculations.     

Metal–Organic Framework Membrane Nanopores as Biomimetic Photoresponsive Ion Channels and Photodriven Ion Pumps

Biological ion channels and ion pumps with sub-nanometer sizes modulate ion transport in response to external stimuli. Realizing such functions with sub-nanometer solid-state nanopores has been an important topic with wide practical applications. Herein, we demonstrate a biomimetic photoresponsive ion channel and photodriven ion pump using a porphyrin-based metal–organic framework membrane with pore sizes comparable to hydrated ions. We show that the molecular-size pores enable precise and robust optoelectronic ion transport modulation in a broad range of concentrations, unparalleled with conventional solid-state nanopores. Upon decoration with platinum nanoparticles to form a Schottky barrier photodiode, photovoltage across the membrane is generated with “uphill” ion transport from low concentration to high concentration. These results may spark applications in energy conversion, ion sieving, and artificial photosynthesis.     

层流与湍流等离子体冲击射流特性比较

本文采用数值模拟方法,对层流与湍流氩等离子体射流在空气环境中冲击平板时的流动与传热特性进行了对比研究.结果表明,在平板和射流进口间的距离较大时,平板的存在只对其附近的射流参数分布有较大影响,层流等离子体冲击射流的温度与轴向速度的轴向梯度明显小于湍流等离子体冲击射流情形;由于在平板表面形成的径向壁面射流对引射的附加贡献,层流和湍流等离子体冲击射流对环境空气的引射量明显增加.     

探针移动速度对等离子体射流热流密度测量结果的影响

采用自行研制的中心嵌有铜柱感应件的小尺寸杆状热流探针,在低扰动条件下,对射入大气环境的纯氩层流等热离子体射流传向铜探头表面的热流密度进行了动态测量.结果表明,在射流最高温度16500 K、最大轴向速度850 m/s、探针垂直于射流流动方向的移动速度130～260 mm/s的实验参数范围内,随着探针移动速度的提高,测得的热流密度值减小;射流温度和速度越高,探针移动速度对热流密度测量值的影响越大.     

A Concise Method to Predict the Mean Dynamic Pressure on a Plunge Pool Slab

Hydrodynamic pressure exerted on a plunge pool slab by jet impingement is of high interest in high dam projects. The present study experimentally investigated the characteristics of pressure induced by a jet through a constant width flip bucket (CFB) and a slit flip bucket (SFB). A pressurized plane pipe was employed in the flume experiments to control the inlet velocities in the flip buckets. A concise method is proposed to predict the mean dynamic pressure field. Its implementation is summarized as follows: First, the position of the pressure field is determined by the trajectories of free jets, and to calculate its trajectories, an equation based on parabolic trajectory theory is used; second, the maximum mean dynamic pressure is obtained through dimensional analysis, and then the pressure field is established by applying the law of Gaussian distribution. Those steps are integrated into a concise computing procedure by using some easy-to-obtain parameters. Some key parameters, such as takeoff velocity coefficient, takeoff angle coefficient, and the parameter k2, are also investigated in this paper. The formulas of these coefficients are obtained by fitting the experimental data. Using the proposed method, the easy-to-obtain geometric parameters and initial hydraulic conditions can be used to calculate the maximum mean dynamic pressure on the slab. A comparison between experimental data and calculated results confirmed the practicability of this model. These research results provide a reference for hydraulic applications.