非对称射流形成的几何理论(二)

将平板非对称正碰撞形成射流满足的定常方程组封闭条件推广到非正碰情况，提出了平面二维条件下非对称射流形成的一般理论，给出了射流形成的临界条件和出流射流的理论公式。对斜碰撞情形下非对称射流的出流方向、厚度随碰撞角和来流初始位形的变化规律进行了理论预测和数值模拟，理论解与二维欧拉程序的仿真结果符合较好。     

Local flows of a deformable damageable medium under impact interaction with a cavitating fluid

Local viscoplastic-flow and damage processes in a deformable medium induced by the collapse of dispersed vapor-gas bubbles in the near-wall layer of a cavitating fluid in the presence of propagating shock waves are investigated. The study is based on a generalized model developed for describing nonlinear deformations and flow of damageable media and on the results obtained earlier for local fluid flows induced by limiting transitions of vapor-gas bubbles.     

Rebounding of a shaped-charge jet

The phenomenon of rebounding of a shaped-charge jet from the armour surface with small angles between the jet axis and the target surface is considered. Rebounding angles as a function of jet velocity are obtained in experiments for a copper shaped-charge jet. An engineering calculation technique is developed. The results calculated with the use of this technique are in reasonable agreement with experimental data. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 5, pp. 17–20, September–October, 2007.     

Interaction of a heavy fluid flow in a channel with a transverse jet barrier

An experimental and numerical analysis of the interaction between a plane horizontal water flow in a rectangular channel (free water current) and a plane thin water jet (water jet curtain) is presented; the jet flows out vertically from either a slot nozzle in the bottom of the channel or the crest of a rigid spillway at a velocity appreciably (several times) greater than the water velocity in the channel. Numerical calculations were carried out using the STAR-CD software package preliminarily tested against the experimental data obtained. The dependence of the water level in the channel at a certain distance ahead of the jet barrier on the main jet parameters and the water flow rate in the horizontal channel is studied. It is found that in the region of the interface between the flows both steady and unsteady (self-oscillatory) flow patterns can be realized. Steady stream/jet interaction patterns of the “ejection” and “ejection-spillway” types are distinguished and a criterion separating these regimes is obtained. The notion of a rigid spillway equivalent to a jet curtain is introduced and an approximate dependence of its height on the relevant parameters of the problem is derived. The possibility of effectively controlling the water level ahead of a rigid spillway with a sharp edge by means of a plane water jet flowing from its crest is investigated. The boundary of transition to self-oscillation interaction patterns in the region of the flow interface is determined. The structure of these flows and a possible mechanism of their generation are described. Within the framework of the inviscid incompressible fluid model in the approximate formulation for a “thin” jet, an analytical dependence of the greatest possible depth of a reservoir filled with a heavy fluid at rest and screened by a vertical jet barrier on the jet parameters is obtained.     

Modeling of dynamics, heat transfer, and combustion in two-phase turbulent flows: 2. Flows with heat transfer and combustion

The objective of this part of the paper is to summarize the information concerning the authors' works in the field of simulation of two-phase gas-particle turbulent flows with heat transfer and combustion. A kinetic equation had been derived for the probability density function (PDF) of the particle velocity, temperature, and mass distributions in turbulent flows. This PDF equation is used for the construction of the governing conservation equations of mass, momentum, and heat transfer in the dispersed particle phase.The numerical scheme incorporates two-phase fluid dynamics, convective and radiative heat transfer, and combustion. The proposed models have been applied to the calculation of various particle-laden turbulent flows in jets, combustion and gasification chambers, and furnaces.     

Model of Nonlinear Evolution of Long-Wave Perturbations on an Ideally Conducting Jet with Current in a Longitudinal Magnetic Field. Collision of Magnetized Jets

Within the framework of the magnetohydrodynamic approach, a system of equations is derived for nonlinear evolution of long-wave axisymmetric perturbations on a conducting fluid jet with surface electric current, located along the axis of a conducting solid cylinder in a longitudinal magnetic field. The fluid is assumed to be inviscid, incompressible, and ideally conducting, like the cylinder walls. It is shown that, if the longitudinal field is uniform and the axial flow is shear-free, this system can be either hyperbolic or elliptic-hyperbolic, depending on problem parameters. The boundaries of hyperbolicity and ellipticity regions in the space of solutions are determined. In the hyperbolicity region, equations of characteristics and conditions on them are obtained. The problem of the decay of velocity discontinuity on the jet is considered. Conditions are found for the existence of a continuous self-similar solution in the hyperbolicity region, corresponding to collision of jets.     

CuSO_4溶液中Cu元素浓度的激光诱导击穿光谱测量研究

利用激光诱导击穿光谱技术对CuSO4溶液中的Cu元素浓度进行实验测量。利用配置的七种浓度的CuSO4溶液,采用统计探索性数据分析方法给出了Cu元素定标曲线,其拟合度系数R2大于0.98,激光诱导击穿光谱的平均相对偏差值为6.9%,Cu元素的平均最小检测限为12ppm。利用去一交互检验方法采用分析谱线CuⅠ324.75nm和CuⅠ327.40nm对应的七种溶液的平均测量相对误差分别为6.52%和5.86%。当Cu元素浓度在10ppm时实验相对误差较大,其值为10.3%,而浓度达到2 000ppm时相对误差值减小,仅为1.1%,说明LIBS技术在溶液较低元素浓度检测方面的准确度有待提高。研究结果表明激光诱导击穿光谱技术在环境水污染重金属元素检测方面具有潜在的应用前景。     

常压高频放电等离子体炬改进制备CO2/CH4重整用Ni/MgO催化剂

比较了常规法、等离子体炬法和等离子体炬辅助焙烧法制得的Ni/MgO催化剂上CO2/CH4重整反应性能差异,并利用X射线衍射、透射电镜、X射线光电子能谱和CO2程序升温表面反应等技术对反应前后催化剂进行了表征,结果表明,采用等离子体炬辅助焙烧法制备的催化剂上Ni晶粒粒径小,分散度较高,低温活性和抗积炭性能较高;在常压,7...     

Patterned hydrogel substrates for cell culture with electrohydrodynamic jet printing

Cells respond to and are directed by physiochemical cues in their microenvironment, including geometry and substrate stiffness. The development of substrates for cell culture with precisely controlled physiochemical characteristics has the potential to advance the understanding of cell biology considerably. In this communication, E-jet printing is introduced as a method for creating high-resolution protein patterns on substrates with controlled elasticity. It is the first application of E-jet printing on a soft surface. Protein spots as small as 5 μm in diameter on polyacrylamide are demonstrated. The patterned hydrogels are shown to support cell attachment and spreading. Polyacrylamide substrates patterned by E-jet printing may be applied to further the study of cellular mechanobiology.     

Tame linear extension operators for smooth Whitney functions

For a compact set K⊆Rd we present a rather easy construction of a linear extension operator E:E(K)→C^∞(Rd) for the space of Whitney jets E(K) which satisfies linear tame continuity estimates , where ‖⋅s_‖ denotes the s-th Whitney norm. The construction turns out to be possible if and only if the local Markov inequality LMI(s) introduced by Bos and Milman holds for every s>r on K. In particular, E(K) admits a tame linear extension operator if and only if the local Markov inequality LMI(s) holds on K for some s?1.