Spin polarization and temperature dependence of electron effective mass in quantum wires

The electron effective mass in GaAs quantum wires has been estimated by using a full dynamical random-phase approximation to examine its properties versus spin polarization, temperature, and carrier density. A decrease of mass with spin polarization is seen. The minority mass increases with the polarization while the majority mass decreases and this behaviour is seen for all densities. A maximal enhancement of mass at moderate temperature around 25 K is also presented. These calculations show a qualitative consistence with results in two-dimensional systems and help to control the electronic transport in quantum wires.     

Recent advances in liquid chromatographic methods for the determination of selective serotonin reuptake inhibitors and serotonin norepinephrine reuptake inhibitors

Depression is now the second largest public health burden throughout the world. Selective serotonin reuptake inhibitors (SSRIs) and serotonin norepinephrine reuptake inhibitors (SNRIs) have replaced older antidepressants to become first-line medications to treat this disease with increased remission rates and markedly decreased incidence of severe adverse events. Traditional and modern bioanalytical strategies for SSRI and SNRI determination are being continuously improved. There has also been a recent increase in the use of unconventional sample preparation methods. This review critically evaluates the development of SSRI and SNRI liquid chromatographic analytical methods published between 2014 and mid-2019, with special attention to novel sample preparation methods.     

Modified layered bimetallic compound used as a novel adsorbent for the solid-phase extraction of monoaromatic hydrocarbons from water samples prior to gas chromatography–mass spectrometry

This study reports a promising method of solid-phase extraction for determining the toluene, ethylbenzene, p-xylene, m-xylene, o-xylene, 1,3,5-trimethylbenzene, and 1,2,4-trimethylbenzene in water samples by gas chromatography–mass spectrometry (GC–MS). Prior to this procedure, the magnesium–aluminum bimetallic hydroxides modified with sodium dodecylbenzenesulfonate (Mg/Al-SDBS-LDH) were prepared and served as the novel solid-phase extractant. The Mg/Al-SDBS-LDH has advantage of good hydrophobicity and larger spacing which facilitates the monoaromatic hydrocarbons (MAHCs) into the interlayer for adsorption. As a result, the seven MAHCs in 500 mL water samples were enriched greatly, and the theoretical enrichment factor reached to 125 times. Under the optimized conditions of solid-phase extraction (SPE) and GC–MS, the mass concentration of each MAHC (0.005–10, 0.01–10, or 0.05–10 ng/mL) had a fine linear relationship with peak area. The correlation coefficients were more than 0.995. The detection limits were between 0.001 and 0.01 ng/mL, and the RSD were between 3.1% and 6.6%. The method had been applied to determine the seven MAHCs in the Dongfengqu river water and laboratory wastewater of Chengdu University of Technology successfully.     

A design of experiments concept for the minimization of nonspecific peptide adsorption in the mass spectrometric determination of substance P and related hemokinin‐1

Substance P and hemokinin‐1 were predominantly examined by immunoassays with their limitation to differentiate appropriately between both peptides. The use of liquid chromatography coupled with tandem mass spectrometry is a promising, highly selective alternative. Adsorption processes have been identified in preliminary experiments to play a crucial role in the loss of mass spectrometry intensity of both peptides. Therefore, a design of experiments concept was created to minimize nonspecific peptide adsorption. For this purpose, the most critical influencing parameters—(1) the composition of the injection solvent as well as (2) the most suitable container material—were systematically and concordantly investigated. The addition of modifiers, such as formic acid, dimethyl sulfoxide, and organic solvents, to the injection solvent led to a substantial gain of intensity of substance P and hemokinin‐1 compared to the start gradient as an injection solvent. Furthermore, the systematic investigation underlined the high impact of the container material, demonstrating polypropylene as the most favorable material. A conjoint injection solvent optimum was found to determine both peptides simultaneously by the conduction of a sweet‐spot analysis. The experimental design substantially reduced nonspecific peptide adsorption and enabled the simultaneous and selective determination of endogenous substance P and hemokinin‐1 plasma levels.     

Preparing molecularly imprinted nanoparticles of saponins via cooperative imprinting strategy

Saponin is an important class of natural products with various pharmacological activities. The selective separation of saponins is an essential step before further analysis. Molecular imprinting has been an effective strategy for preparing antibody mimics. However, a facile and efficient imprinting strategy for saponins is still lacking owing to their amphiphilic nature. Herein, we have prepared the saponins imprinted nanoparticles via cooperative imprinting strategy. This new strategy relies on the combination of various non‐covalent interactions (hydrophobic and hydrogen bonding) and covalent boronate affinity interactions. The obtained imprinted nanoparticles could rebind specific saponins from complex matrices with good selectivity, superb tolerance to interference, and fast binding equilibrium. This method was verified to be versatile and facile. Thus, this strategy could greatly facilitate the preparation of imprinted nanoparticles for the specific recognition of saponins.     

Multiplexed therapeutic drug monitoring of antipsychotics in dried plasma spots by LC‐MS/MS

In this work, a convenient method for the therapeutic monitoring of seven common antipsychotic drugs in “dried plasma spot” samples has been developed. It is based on the liquid chromatography tandem mass spectrometry technique, operating in multiple reaction monitoring mode, and a straightforward procedure for the simultaneous extraction of all antipsychotics in a single step, with high extraction yield. The method was fully validated with proper accuracy, precision, selectivity and sensitivity, for all the drugs. Limits of quantification were 0.12, 1.09, 1.46, 1.47, 5.70, 1.32, 1.33 µg/L for haloperidol, aripiprazole, olanzapine, quetiapine, clozapine, risperidone, and paliperidone, respectively. Accuracy, intra‐ and interday precision values were <10% for all drugs at all concentration levels examined. The method was tested in the analysis of 30 plasma samples from real patients for each drug. The proposed analytical approach, by combining practical and logistical advantages of microsampling with liquid chromatography tandem mass spectrometry analytical performance, could offer an ideal strategy for accurate and timely therapeutic drug monitoring of antipsychotic drugs in most clinical settings, even in remote centers and/or in out‐patient settings, bringing so many potential improvements in psychiatric patient care.     

The formation of an oscillating system during the sputtering of sapphire single crystal with pulsed glow discharge

Sapphire (α-Al₂O₃, transparent corundum) single crystals were analyzed with pulsed direct current glow discharge mass spectrometry. Combined hollow cathode was used as a discharge cell. To obtain stable sputtering of dielectric material, a formation of initial surface conductivity via preliminary vacuum deposition of thin metallic layer was proposed. Al and Ta film of different thickness (30–200 nm) were considered for this purpose. The approach was found to provide the effective sputtering of dielectrics. The formation of an oscillating system was shown during the sputtering of sapphire samples in a tantalum combined hollow cathode cell. For oriented sapphire single crystals, periodic oscillations of ²⁷Al⁺ intensity were acquired. This phenomenon was observed only for dielectric single crystals and not for other dielectric samples, e.g. alumina ceramic or fused quartz. The linear dependence of oscillation period on the duration of discharge pulse was found. The origin of these oscillations seems to be attributed to periodic fluctuations of surface conductivity. Oscillation periods calculated for two different orientations of sapphire single crystals (001 and 012) were found to be proportional to the main period of sapphire lattice. Therefore, an assumption that the crystal internal structure of the sample might be the cause of the oscillations is discussed.     

Simultaneous determination of residues of metalaxyl,cyazofamid and a cyazofamid metabolite in tobacco leaves and soil by liquid chromatography with tandem mass spectrometry

A simple method was developed and validated for the simultaneous determination of metalaxyl, cyazofamid and the cyazofamid metabolite 4‐chloro‐5‐p‐tolylimidazole‐2‐carbonitrile (CCIM) by liquid chromatography with tandem mass spectrometry. The three target compounds were extracted from tobacco and soil with acetonitrile containing 0.1% acetic acid, and the extracts were purified using octadecylsilane. The proposed method showed satisfactory linearity (R² ≥ 0.9985) for the target compounds. The limits of detection for metalaxyl, cyazofamid and CCIM were 0.006, 0.06 and 0.06 mg/kg in soil and green tobacco leaves and 0.03, 0.3 and 0.3 mg/kg in cured tobacco leaves, respectively. The limits of quantification for metalaxyl, cyazofamid and CCIM were 0.02, 0.2 and 0.2 mg/kg in soil and green tobacco leaves and 0.1, 1 and 1 mg/kg in cured tobacco leaves, respectively. The average recoveries from soil and tobacco were 72.91–98.40% for metalaxyl, 76.73–105.80% for cyazofamid and 74.48–106.45% for CCIM. The relative standard deviation range was 1.23–6.99%. The developed method was successfully applied to analysis of residues of metalaxyl, cyazofamid and CCIM in real soil and tobacco samples. The results indicated that the established method could meet the requirement for the analysis of trace amounts of all three analytes in soil and tobacco.     

Density and velocity statistics in variable density turbulent mixing

We experimentally study variable–density mixing of miscible gases in an open-circuit wind tunnel using simultaneous particle image velocimetry and planar laser-induced fluorescence. Experiments of a high Atwood number (0.6) and low Atwood number (0.1) are performed to compare non-Boussinesq cases with the Boussinesq limit. The higher density gas is injected into the wind tunnel co-flow using a round jet configuration, and near-field and far-field measurements are performed to examine mixing in both momentum and buoyancy-dominated regimes. The effects of buoyancy are measurable and important in both large-scale mixing features and in turbulence quantities. The low Atwood number PDFs (probability density functions) show fast and uniform mixing. The high Atwood number PDFs of density have skewness towards the larger densities, indicating less mixing of the heavy fluid due to its inertia. The skewness in the density gradient PDFs at high Atwood number displays strong density local variations that can enhance mixing at molecular scales. Turbulent kinetic energy decreases with streamwise distance from the jet for low Atwood number but increases for high Atwood number due to larger buoyancy and density-driven shear. Over 3000 experimental realisations are used to calculate statistical characteristics of the mixing, including valuable and rarely given data such as Favre-averaged turbulent quantities: mass flux velocity, Reynolds stress, turbulent kinetic energy, and density-specific volume correlation. Buoyancy effects are observed in these quantities and the trends are compared qualitatively with direct numerical simulations.