基于CDIO导向的微项目驱动交叉混合教学模式——以“日化用品制造技术”教学为例

分析了传统教学模式的优缺点,运用CDIO理念导向的工程教育模式构建了融合教学目标和教学内容的微项目,教师的“教”和学生的“学”与“做”交叉混合进行,形成了一种新的积极高效的教学模式,并在“日化用品制造技术”的教学中尝试开展了这种新的教学模式。实践表明在这种新的教学模式下,学生的学习积极性得以充分调动,学习效果有一定程度的提高,该教学模式有积极的现实意义。     

Irregular 1-sets on the graphs of continuous functions

One can define in a natural way irregular 1-sets on the graphs of several fractal functions, like Takagi’s function, Weierstrass-Cellerier type functions and the typical continuous function. These irregular 1-sets can be useful during the investigation of level-sets and occupation measures of these functions. For example, we see that for Takagi’s function and for certain Weierstrass-Cellerier functions the occupation measure is singular with respect to the Lebesgue measure and for almost every level the level set is finite.     

Rapid analysis of six trace trichlorophenols in seawater by magnetic micro‐solid‐phase extraction and liquid chromatography with tandem mass spectrometry

A new facile, rapid, inexpensive, and sensitive method for the analysis of six trace trichlorophenols in seawater samples was developed by magnetic micro‐solid‐phase extraction coupled to liquid chromatography with tandem mass spectrometry. Core–shell covalently functionalized ferroferric oxide coated with aminated silicon dioxide and decorated with multiwalled carbon nanotubes was applied as an adsorbent to perform the extraction process. The effect of factors including solution pH, contact time, adsorbent amount, and ionic strength were investigated in detail. The obtained results revealed that the proposed adsorbent was a highly effective and low‐cost magnetic micro‐solid‐phase extraction material for the enrichment of 2,3,4‐trichlorophenol, 2,3,5‐trichlorophenol, 2,3,6‐trichlorophenol, 2,4,5‐trichlorophenol, 2,4,6‐trichlorophenol, and 3,4,5‐trichlorophenol from seawater. Under the optimized conditions, the recoveries ranged from 88.0 to 99.5% at the three spiking levels, the limits of detection and the limits of quantification were 0.002 and 0.007 μg/L for the six trichlorophenols, respectively. The intra‐ and interday relative standard deviations were 2.0–6.7 and 4.5–8.9%, respectively. The calibration curves showed a good linearity in the range of 0.02–5.0 μg/L. The routine run analyses showed that the developed method was fast, simple, accurate, solvent‐saving and high resolution, and it was suitable for the determination of trace trichlorophenols in seawater.     

Computational design and fabrication of core–shell magnetic molecularly imprinted polymer for dispersive micro‐solid‐phase extraction coupled with high‐performance liquid chromatography for the determination of rhodamine 6G

A novel core–shell magnetic nano‐adsorbent with surface molecularly imprinted polymer coating was fabricated and then applied to dispersive micro‐solid‐phase extraction followed by determination of rhodamine 6G using high‐performance liquid chromatography. The molecularly imprinted polymer coating was prepared by copolymerization of dopamine and m‐aminophenylboronic acid (functional monomers), in the presence of rhodamine 6G (template). The selection of the suitable functional monomers was based on the interaction between different monomers and the template using the density functional theory. The ratios of the monomers to template were further optimized by an OA₉ (3⁴) orthogonal array design. The binding performances of the adsorbent were evaluated by static, kinetic, and selective adsorption experiments. The results reveal that the adsorbent possesses remarkable affinity and binding specificity for rhodamine 6G because of the enhanced Lewis acid‐base interaction between the B(Ш) embedded in the imprinted cavities and the template. The nano‐adsorbent was successfully applied to dispersive micro‐solid‐phase extraction coupled to high‐performance liquid chromatography for the trace determination of rhodamine 6G in samples with a detection limit of 2.7 nmol/L. Spiked recoveries ranged from 93.0–99.1, 89.5–92.7, and 86.9–105% in river water, matrimony vine and paprika samples, respectively, with relative standard deviations of less than 4.3%.     

Dispersion of hydrophobic magnetic nanoparticles using ultarsonic-assisted in combination with coacervative microextraction for the simultaneous preconcentration and determination of tricyclic antidepressant drugs in biological fluids

A two-step sample preparation technique based on dispersive micro solid-phase extraction combined with coacervative microextraction is presented for preconcentration and determination of tricyclic antidepressant drugs in biological samples. An important feature of the method is the application of hydrophobic magnetic nanoparticles, which in combination with coacervative microextraction method enables development of rapid and efficient extraction procedure in order to achievement of a high extraction efficiency. Simultaneous optimization by experimental design lead to improvement of method with low cost which supply useful information about interaction among variables. Under the optimized conditions, a linear range of 5–1000 ng mL⁻¹ with detection limits from 0.51 to 1.4 ng mL⁻¹ were obtained for target analytes. The method was successfully used for the determination of analytes in biological fluids (plasma and urine) with relative recoveries in the range of 89–105% (RSDs < 3.5%).     

Trace determination of safranin O dye using ultrasound assisted dispersive solid-phase micro extraction: Artificial neural network-genetic algorithm and response surface methodology

In this study, ultrasound assisted dispersive solid-phase micro extraction combined with spectrophotometry (USA-DSPME-UV) method based on activated carbon modified with Fe₂O₃ nanoparticles (Fe₂O₃-NPs-AC) was developed for pre-concentration and determination of safranin O (SO). It is known that the efficiency of USA-DSPME-UV method may be affected by pH, amount of adsorbent, ultrasound time and eluent volume and the extent and magnitude of their contribution on response (in term of main and interaction part) was studied by using central composite design (CCD) and artificial neural network-genetic algorithms (ANN-GA). Accordingly by adjustment of experimental conditions suggested by ANN-GA at pH 6.5, 1.1 mg of adsorbent, 10 min ultrasound and 150 μL of eluent volume led to achievement of best operation performance like low LOD (6.3 ng mL⁻¹) and LOQ (17.5 ng mL⁻¹) in the range of 25–3500 ng mL⁻¹. In following stage, the SO content in real water and wastewater samples with recoveries between 93.27–99.41% with RSD lower than 3% was successfully determined.     

Method of fast trace microanalysis of the chiral pesticides epoxiconazole and novaluron in soil samples using off-line flow-through extraction and on-column direct large volume injection in reversed-phase high performance liquid chromatography

An analytical method combining off-line flow-through extraction of a soil micro-sample (mass around 100 mg, packed into a short HPLC glass column) and direct on-column large-volume injection (LVI up to 1.00 mL) of a methanol-water soil extract onto a conventional C18 RP HPLC column enabled fast (within 3.5 minutes) trace micro-analysis of the relatively new chiral pesticides epoxiconazole (E) and novaluron (N), respectively. Linear calibration curves were evaluated from UV detection (230 nm) data in the range from 0.1 to 5 mg/kg in three most abundant Slovak agricultural soils. LOD (confidence band) at the levels 0.08-0.11 mg/kg and LOQ 0.4-0.6 mg/kg and LOD (S/N = 3) at the levels 0.007-0.018 mg/kg and LOQ (S/N = 10) 0.024-0.060 mg/kg, respectively, of dry soil were achieved. Recovery of pesticides in the overall LVI method including flow-through 130-200 mg soil micro-sample extraction was: for epoxiconazole from 74 to 85% and from 56% to 90% for novaluron with reproducibility within +/- 6% RSD. This fast (30 min) and simple method consists of just three steps which are short column filling with a solid micro-sample; flow-through liquid extraction and direct large-volume injection RP HPLC DAD analysis. The method is prepared for automation and further analysis of enantiomers of both investigated pesticides by achiral-chiral column switching techniques.     

In situ micro-sized gel-forming injectable implant using biodegradable amphiphilic graft copolymer

A synthesized graft polymer is used as a biodegradable polymer for an in situ gel-forming injectable implant system. The amphiphilic character of the polymer in the graft structure lowered the viscosity of the polymer solution, which enabled easy injection. A micro-sized gel can be obtained with this system, which has not been found for previous in situ gel-forming systems with poly[(D,L-lactide)-co-glycolide] copolymer. In addition, a protein particle embedded gel exhibits good in vitro drug release performance as a result of the enhanced stability and shorter diffusion length.     

Patterned co-culture of primary hepatocytes and fibroblasts using polyelectrolyte multilayer templates

This paper describes the formation of patterned cell co-cultures using the layer-by-layer deposition of synthetic ionic polymers and without the aid of adhesive proteins/ligands such as collagen or fibronectin. In this study, we used synthetic polymers, namely poly(diallyldimethylammonium chloride) (PDAC) and sulfonated polystyrene (SPS) as the polycation and polyanion, respectively, to build the multilayer films. We formed SPS patterns on polyelectrolyte multilayer (PEM) surfaces either by microcontact printing PDAC onto SPS surfaces or vice-versa. To create patterned co-cultures on PEMs, we capitalize on the preferential attachment and spreading of primary hepatocytes on SPS as opposed to PDAC surfaces. In contrast, fibroblasts readily attached to both PDAC and SPS surfaces, and as a result, we were able to obtain patterned co-cultures of fibroblast and primary hepatocytes on synthetic PEM surfaces. We characterized the morphology and hepatic-specific functions of the patterned cell co-cultures with microscopy and biochemical assays. Our results suggest an alternative approach to fabricating controlled co-cultures with specified cell-cell and cell-surface interactions; this approach provides flexibility in designing cell-specific surfaces for tissue engineering applications.     

矿物流场冲击与极性吸附作用产物的红外光谱研究

 在马赫数M≥3冲击作用下和偶极矩大于或等于2.0极性分子的表面吸附作用条件下,对比了7种重要矿物微粒的红外吸收光谱特征及其变化,分析了7种矿物微粒的力学-结构效应以及表面基团的转化过程。