Investigation of the Li1+xV3O8 electrode–organic electrolyte interface by scanning photoelectron microscopy

To investigate the formation of a solid electrolyte interface (SEI) on the Li_1+xV₃O₈ electrode surface in the thermodynamic stability range of the organic electrolyte, we applied scanning photoelectron microscopy (SPEM) to a pristine electrode and to an electrode after ten cycles. The F K-edge absorption spectrum of the cycled electrode showed that LiF forms on the electrode surface during the lithium insertion–extraction process in the Li_1+xV₃O₈/Li cell. The photoelectron spectrum for the cycled electrode showed intense spectral features corresponding to Li 1s, F 2s, F 2p, and P 2p electron signals, whereas these spectral features were of negligible intensity for the pristine electrode. The above results give strong support for the formation of an SEI that consists of LiF and compounds containing phosphorus during operation of the battery. The SPEM images also revealed that the fluorine distribution on the surface of the cycled electrode was inhomogeneous.     

Theoretical Studies on the Si（001）-SiO2 Interface Structure

1 INTRODUCTION Silicon and its alloy have been widely applied in such fields as electronic industry, high-temperature structural ceramics, etc. In addition, the researches on silicon and its relevant materials greatly promote the rapid development of modern optics and infor- mation technology. Therefore, more and more at- tention is focused on the structure of silicon, oxide of silicon and the interfaces between silicon and metal or nonmetal. As an ideal passive film on the Si surface, S…     

Statistical Analysis of the Effect of Mineral Admixtures on the Strength of the Interfacial Transition Zone

Microscopic evidence indicates that the thickness of the interfacial transition zone (ITZ) between the aggregate and the cement paste is modified when mineral admixtures partially replace portland cement. Unfortunately, there is limited information on the significance of these microscopic modifications to the mechanical properties of the ITZ. This research reports experimental results on the shear and tensile strength of the ITZ as affected by the addition of the following mineral admixtures: silica fume, fly ash, and natural pozzolan. Statistical analysis was used to identify the significant parameters affecting the tensile and shear strength of the ITZ. Experimental results indicate that not only does the incorporation of silica fume and fly ash increase the strength of the ITZ, these mineral admixtures have a greater influence on the strength increase of the ITZ than in the strength increase of the cement paste.     

Formulation for XPS spectral change of oxides by ion bombardment as a function of sputtering time

XPS measurement revealed that the original state of TiO₂ was changed to Ti₂O₃ and TiO by ion bombardment. TiO₂ decreased and Ti₂O₃ increased at the initial stage. TiO increased at a later stage than Ti₂O₃. Each of them saturated after enough sputtering time.A formulation was proposed in order to explain the change of XPS spectra for oxides as a function of ion sputtering time. This formulation was based on reaction equations that contain two reduction processes (from TiO₂ to Ti₂O₃ and from Ti₂O₃ to TiO), and sputtering effects. Using four fitting parameters (two reduction coefficients, sputtering yield and information depth), the present formula was fitted to the experimental results. The fitting results agree satisfactorily with the experimental results. The calculation shows that the reduction coefficient from TiO₂ to Ti₂O₃ is about ten times larger than that from Ti₂O₃ to TiO. This calculation predicts that surface composition of an oxide that is changed by ion bombardment will reach a different value depending on its bulk composition. Moreover, the present formulation can determine the chemical states of compounds changed by ion bombardment.     

Macrodefect-Free Materials: Modification of Interfaces in Cement Composites by Polymer Grafting

MDF materials are chemically bonded ceramic materials free of the macrodefects typical of hydraulic cement-based materials. MDF materials arising through reactions of sulfo-aluminate-ferrite belitic (SAFB) clinkers and/or Portland cements (PC) with two types of water-soluble polymer (hydroxy-propylmethyl cellulose {HPMC}, polyphosphate glass {poly-P}) are discussed. Mixes of low energy SAFB clinkers with Portland cement, HPMC and, especially poly-P comprise promising cross-linked compositions additional to the better known MDF materials formed from high alumina cement with polyvinylalcohol/acetate. The principles of co-ordination of P and C atoms (of the polymer) with Al and Fe atoms (originating from the cement) are highlighted from spectroscopic information on next-nearest-neighbour interactions, along with the effects of second co-ordination spheres. Polymers modify the interface through functional bonding/grafting of polymer chains onto the surfaces of cement grains. Both the cross-linked atomic structure and the interface coincide well with the model of functional polymers and represent a new type of atomic-level structure in polymer-modified cements. Interpretation is based on previous magnetic resonance and thermal analysis studies. The compactness of Al(Fe)-O-P cross-links reduces transport through the interfaces, increasing the interfacial interactions and resisting the unfavourable uptake of moisture and carbonation.     

基于分形维数的液体爆炸分散中界面破碎形态研究

通过对爆炸抛撒图象的处理,得到液体界面的曲线.采用盒维数的计算方式,计算界面曲线的分形维数.通过对各时刻液体界面分形维数的变化研究,分析爆炸抛撒近场阶段的变化过程,同时观察到蘑菇状尖顶的出现与破碎,以及空化区域的形成和消失现象。     

一种新颖的测定和分析羟自由基氧化损伤RNA及其分子机理的化学发光体系

近年来，羟自由基（^.OH)对DNA氧化损伤已受到广泛关注，但是很少研究^.OH对RNA的氧化损伤。其实，RNA与DNA一样，也是核酸的两大组分之一，也有许多重要功能。所以^.OH攻击RNA也会引起重后果，会造成细胞功能衰退甚至细胞死亡等。为此，我们建立了Vit.C-CuSO4-Phen-H2O2-PNA这一产生和测定^.OH氧化损伤RNA的化学发光体系，以便加强^.OH氧化损伤RNA的研究。通过对本体系测定条件的研究，得出了本体系最佳组方是：Vit.C,CuSO4,Phen,H2O2和RNA，浓度分别为350μmol/L,55μmol/L,350μmol/L,0.2mol/L和20μg/mL,体系pH为5．5，体系终体积为1mL。随后，利用本体系检测了槲皮素，咖啡酸，黄芩甙和芦丁抗^.OH氧化损伤RNA的作用，发现这四种抗氧化剂均能有效抑制^.OH氧化损伤RNA的分子机理，结果发现，^.OH清除剂硫脲几乎抑制全部发光，推测是因硫脲清除了引发剂^.OH所致；O^-.2清除剂SOD只能抑制小部分发光；^1O2清除剂叠氮化钠和苯甲酸都能抑制绝大部分发光。这些事实提示，^.OH是RNA氧化损伤的引发剂；O^-.2只是导致RNA氧化损伤的次要因素，^1O2才是导致RNA氧化损伤的最主要因素。     

单脉冲和多脉冲飞秒激光对单层光学薄膜的损伤

 利用掺钛的蓝宝石飞秒激光系统输出的单脉冲和多脉冲飞秒激光(中心波长800 nm，脉宽50 fs，靶面聚焦直径Ф 40 μm)，分别对BK7玻璃基底上厚约500 nm的单层HfO₂和单层ZrO₂薄膜进行辐照，得到了这两种薄膜在1-on-1和1 000-on-1测试方法下的激光损伤阈值。实验发现，两种方法下HfO₂单层膜的阈值均比ZrO₂单层膜的阈值高。从简化的Keldysh多光子离化理论出发，认为HfO₂薄膜材料的带比ZrO₂的宽是导致上述结果的主要原因。同时，同一种薄膜的多脉冲下的阈值比单脉冲下的低，原因是多脉冲下，飞秒激光对光学薄膜的损伤存在累积效应。     

塑料闪烁体的辐照特性

利用⁶⁰Co放射源分别对3种塑料闪烁体(BC-408, EJ-200, BC-404)进行辐照损伤研究, 比较辐照前后的透射谱、发射谱及光产额的变化, 发现3种闪烁体在低剂量具有较好的抗辐照性能; 当照射剂量超过1.44×10⁴Gy时,透射谱明显变坏, 光输出减少很严重, 但发射谱却保持不变.     

Electrochemical Immunoanalysis for Carcinoembryonic Antigen Based on Multilayer Architectures of Gold Nanoparticles and Polycation Biomimetic Interface on Glassy Carbon Electrode

This paper describes a layer‐by‐layer (LBL) self‐assembly process of chitosan (CTS) and gold nanoparticles (Au) on the pretreated negatively charged glassy carbon (GC) electrode to fabricate electrochemistry immunosensor with a nontoxic biomimetic interface, which provided an environment similar to a native system and allowed more freedom in orientation for immobilization of carcinoembryonic antibody (anti‐CEA) to monitor carcinoembryonic antigen (CEA). UV‐vis spectroscope, atomic force microscopy (AFM), and cyclic voltammetric (CV) measurements were used to follow the multilayer film formation. The performance of the biominetic interface and factors influencing the assay system were investigated in detail. The differential pulse voltammetry (DPV) current response is used for the CEA concentration assay. The dynamic range was from 0.50 to 80.00 ng mL^?1 with a detection limit of 0.27 ng mL^?1 at 3σ. In addition, the experiment results indicate that immobilization described in this proposed method exhibits a good sensitivity, selectivity, and stability.