MOS器件辐照过程和辐照后效应模拟

模拟MOS器件脉冲电离辐射响应和长时间恢复效应.假设隧道电子从硅进入氧化层和界面态的建立是辐射效应的恢复机理.在整个退火恢复期,采用卷积模型并考虑了栅偏置压的效应.模拟结果表明:退火过程所加栅偏压的大小以及隧道电子效应与建立的界面态所占比例的不同影响器件的恢复率.     

Effect of Coconut Protein and Xanthan Gum,Soybean Polysaccharide and Gelatin Interactions in Oil-Water Interface

We report on our study of the interactions between coconut protein extracted from coconut meat and three hydrocolloids (gelatin, xanthan gum, and soybean polysaccharide) and their interfacial adsorption and emulsification properties. We used Zeta potential, fluorescence spectroscopy scanning and ITC to investigate the interactions between a fixed concentration (1%) of coconut protein and varying concentrations of hydrocolloid. Through the interfacial tension and interfacial viscoelasticity, the interfacial properties of the hydrocolloid and coconut protein composite solution were explored. The physical stability of the corresponding emulsion is predicted through microstructure and stability analysis. Xanthan gum forms a flocculent complex with coconut protein under acidic conditions. Soy polysaccharides specifically bind to coconut protein. Under acidic conditions, this complex is stabilized through the steric hindrance of soy polysaccharides. Due to gelatin-coconut protein interactions, the isoelectric point of this complex changes. The interfacial tension results show that as time increases, the interfacial tensions of the three composite solutions decrease. The increase in the concentration of xanthan gum makes the interfacial tension decrease first and then increase. The addition of soybean polysaccharides reduces the interfacial tension of coconut protein. The addition of xanthan gum forms a stronger elastic interface film. Emulsion characterization showed that the gelatin-added system showed better stability. However, the addition of xanthan gum caused stratification quickly, and the addition of soybean polysaccharides also led to instability because the addition of polysaccharides led to a decrease in thermodynamic compatibility. This research lays the foundation for future research into coconut milk production technology.     

Gap states at organic-metal interfaces: A combined spectroscopic and theoretical study

A systematic understanding and controlling of gap states formed at the organic-metal interfaces is a key factor for fabricating functional organic-metal systems, as in case of heterojunctions in semiconductor devices. We report here the characterization of gap states near the Fermi level of metal substrate by metastable atom electron spectroscopy and first-principles density functional calculations. The gap states in organic-metal systems are classified into two types, i.e., chemisorption-induced gap states (CIGSs) and complex-based gap states (CBGSs). CIGSs can be further classified whether the metal wave function tails a short distance into the chemisorbed species with the exponential decay (damping type) or is exposed sufficiently to the chemisorbed species by mixing with the organic orbitals (propagating type). CIGSs observed in alkanethiolate and C₆₀ on Pt(1 1 1) are their typical examples, respectively. As a consequence, alkanethiolate serves as a poor mediator of metal wave function, whereas C₆₀ acts as a good mediator, which is responsible for tunneling mechanism and eventually electric conductivity in the relevant metal-organic-metal junctions. CBGSs are identified in bathocuproine films deposited on K-covered Au, where the K atoms migrate into the film to form an organic-metal complex. The CBGSs are distributed over the multilayer film, in contrast to the case of CIGS. With increasing film thickness, the CBGSs exhibit incommensurate energy shifts with the valence band top of the film, indicating that the Schottky-Mott model breaks down as evaluating charge transport in organic-metal systems.     

光阴极注入器型能量回收射频加速器

光阴极注入器型能量回收射频加速器（PERL）是新一代加速器,在高平均功率自由电子激光和下一代高亮度光源等研究中有很好的应用前景。分析了PERL的强流与高平均功率特性,对注入器输出束流品质的要求及光阴极注入器、超导加速腔等关键技术进行了研究,设计分析了一种特殊结构的高压DC Gun光阴极注入器,能有效地提高DC加速腔中的加速场强,当高压为1MV和加速场达到10MV/m时,产生的电子束流能够基本满足PERL应用要求。同一超导加速段中的束流加速和能量回收的数值模拟计算结果表明,能获得高效率电子束流能量回收效果。     

过模慢波结构频率反射特性及谐振腔的影响

利用有限元方法求解:S-参数矩阵,研究了过模慢波结构对圆波导TM01,TM02模的反射特性,分析了在慢波结构末端加入谐振腔后,由于两端口的不对称性而造成的对反射特性影响。结果表明,在TM01的π模频率附近,慢波结构和谐振腔组成的系统对无谐振腔一侧端口入射TM01模的反射增大,而对有谐振腔一侧端口入射TM01模的反射减小。根据计算结果,解释了普通多波切伦柯夫振荡器所用慢波结构周期数较多的原因,说明了在多波切伦柯夫振荡器中引入谐振腔后,不但可以减少所用慢波结构周期数,而且有利于提高微波输出效率。     

The electronic transport properties for a single-wall ZnO nanotube with different coupling interfaces

The transport properties of a single-wall ZnO nanotube contacted with two Au (Al or Cu ) electrodes are investigated by a theoretical approach. Our results suggest the contact resistance for ZnO nanotube connected with Au electrodes is the largest one as compared with Al and Cu acting as electrodes. The local density of states (LDOS) near the ZnO nanotube/Cu(Al) interface shows the strong electronic interaction. Also shown is that for Au–ZnO system, we can observe a best rectifying performance, the next is the Al–ZnO system, and the third is Cu–ZnO system. This rectification is also fully rationalized by the calculated transmission spectra, the spatial distribution of the lowest unoccupied molecular orbital and highest occupied molecular orbital states, and the electrostatic potential distribution.     

Adhesive fracture of heterogeneous interfaces

We have studied the effect of interface heterogeneity on fracture, at both local and global scales. The single cantilever beam adhesion test was used to investigate interfacial fracture between polycarbonate plates and an elastic/fragile epoxy adhesive. Two surface treatments were applied to a (given) polycarbonate plate giving zones of strong and weak adhesion parallel to the crack direction. Calculated fracture energies differed from those expected from a simple rule-of-mixtures. A perturbation method, proposed by Rice, was used and results compared with crack fronts observed in situ. The technique was applied successfully but the difference in values of stress intensity factor between the zones was found substantially different from the experimental value. In an attempt to explain discrepancies, specimens with discontinuous crack fronts (adhesive and/or plates severed along the strong/weak adhesion frontier) were tested. Good agreement was found with the rule-of-mixtures predictions raising questions about the role of crack front continuity in load transfer.     

北京自由电子激光最近进展──实现饱和振荡

北京自由电子激光(BFEL)装置于1993年底在10.68μm处实现了饱和振荡.输出激光能量为3mJ,饱和平顶宽度2μs.对应饱和振荡平均功率为210kW(宏脉冲),峰值功率约为20MW,比自发辐射高8个量级,单程小讯号净增益为24%,转换效率为0.45%,与理论预期结果相符.光束质量接近衍射极限.目前装置可工作于9-11μm.     

有机层界面对双层有机发光二极管复合效率的影响

建立了双层有机发光二极管中载流子在有机层界面复合的无序跳跃理论模型.由于有机分子材料的空间及能带结构的无序性，采用刚体模型处理有机层界面问题是不恰当的，而采用无序跳跃模型比较合理.复合效率及复合电流由载流子跳跃距离、有机层界面的有效势垒高度及该界面处的电场强度分布所决定：在双层器件ITO/α-NPD/Alq₃/Al中，当所加电压小于19.5V时，复合效率随着载流子跳跃距离的增加而增加，而大于19.5V时，复合效率随着其距离的增加而减少；复合效率随着有机层界面有效势垒高度的增加而增加； 关键词： 有机层界面 双层有机发光二极管 复合效率 有效势垒高度 无序跳跃模型     

The Perturbation of the Interface of the Two-dimensional Diffraction Problem and an Approximating Muskat Modal

ln this paper, a new transformation is found out to straighten the interface Γ_2 x = f(y), f ∈ C^{2+a}([0, a]), f_y|_y =0, δ < f < l-δ,δ > 0,δ,l=constants and a perturbation of the interface is considered for a two dimensional diffraction problem. And the existence, uniqueness and regularity of an appeoximating Muskat model are proved.