超音速冲击射流离散频率噪声的屏蔽抑制方法

根据导致超音速冲击射流离散频率噪声的反馈机理，提出了一种能够有效地破坏反馈环的形成，从而抑制超音速冲击射流离散频率噪声的喷嘴屏蔽方法。这种方法是通过阻隔反馈波使其不能到达喷嘴唇口从而破坏反馈环、同时屏蔽罩不与射流接触来实现降噪的目的的。本文介绍了这种方法的基本思想并提出了屏蔽罩的设计要点。实验结果表明，对于合适的屏蔽罩的参数，降噪效果达5分贝以上。应用LDV方法对超声速射流轴线速度进行了测量和比较，发现应用屏蔽降噪方法以后射流轴线速度显著增加，核心区长度增加50%左右。分析表明这种降噪方法对射流冲击障碍物的推力和除尘除水效率的提高有帮助。     

Wall pressure and shear stress measurements beneath an impinging jet

This paper presents comprehensive measurements of wall pressure and surface shear stress beneath a plane, two-dimensional, turbulent jet impinging normally onto a flat surface. The results cover a wider range of Reynolds number and ratio of impingement height (H) to nozzle gap (D) than do previous studies. The pressure distributions are nearly Gaussian, independent of Reynolds number, and closely balance the momentum flux from the jet nozzle as H/D varies. Particular attention was paid to probe size in measuring the wall shear stress because this has a significant effect on the results. A range of Preston tubes and Stanton probes were tested from which it was found that a 0.05-mm-high Stanton probe—the smallest that we could make—appeared to give accurate results. As expected, the shape of the wall shear stress distributions depended both on H/D and on Reynolds number. Furthermore, the relation between wall pressure and shear stress from Hiemenz's theoretical solution for stagnation flow is not in agreement with the results. It is postulated that the discrepancy is due to the relatively high free-stream turbulence level in the jet. Future papers will document the mean flow field and turbulence and the time dependence of the surface pressure.     

Impingement heat transfer at a circular cylinder due to a submerged slot jet of water

An experimental investigation was carried out on the heat transfer due to a submerged slot jet of water impinging on a circular cylinder in crossflow. The cylinder diameter and the slot width are of the same order of magnitude, specifically D_s = 2.0 and 3.0 mm and D_c = 2.5 and 3.0 mm. The experimental apparatus allowed variation of the slot width, the cylinder diameter, and the distance from nozxle exit to heater. Conditions of impingement from the bottom (ascending flow) were taken into consideration as well as impingement from above (descending flow). The Nusselt number was determined as a function of Reynolds and Prandtl numbers in the range 1.5 × 10³ < Re < 2.0 × 10⁴, 2.7 < Pr < 7.0, and 1.5 ≤ z/D_s ≤ 10. The experimental data were correlated with a simple equation that fits 90% of the data with a precision of 20%.     

Variational boundary integral approach for asymmetric impinging jets of arbitrary two‐dimensional nozzle

We consider asymmetric impinging jets issuing from an arbitrary nozzle. The flow is assumed to be two‐dimensional, inviscid, incompressible, and irrotational. The impinging jet from an arbitrary nozzle has a couple of separated infinite free boundaries, which makes the problem hard to solve. We formulate this problem using the stream function represented with a specific single layer potential. This potential can be extended to the surrounding region of the jet flow, and this extension can be proved to be a bounded function. Using this fact, the formulation yields the boundary integral equations on the entire nozzle and free boundary. In addition, a boundary perturbation produces an extraordinary boundary integral equation for the boundary variation. Based on these variational boundary integral equations, we can provide an efficient algorithm that can treat with the asymmetric impinging jets having arbitrarily shaped nozzles. Particularly, the proposed algorithm uses the infinite computational domain instead of a truncated one. To show the convergence and accuracy of the numerical solution, we compare our solutions with the exact solutions of free jets. Numerical results on diverse impinging jets with nozzles of various shapes are also presented to demonstrate the applicability and reliability of the algorithm.     

PIV MEASUREMENT OF CLOSE IMPINGING JET ON FLAT PLATE 1)

运用时间分辨粒子成像测速系统(time-resolved particle image velocimetry, TR-PIV)对近距离下射流冲击平板时的流场进行了直接测量, 通过对两个正交的平面流场开展测量, 揭示了冲击距离和雷诺数对射流间隙内三维流动特征及涡系结构演化规律的影响. 结果表明: 射流间隙存在三种典型的涡系结构, 分别为双涡环模式、单涡环模式和卷吸模式, 但在大流量湍流状态下, 射流可能会冲破涡环, 形成随机的高速出流, 各流动模式的出现主要与射流流态及壁面约束作用有关. 运用涡量分析对三种典型涡系结构的能量传递和损失特性进行了比较. 结果表明: 近距离冲击时, 射流的能量通过涡环模式向外传递. 在双涡环模式下, 两个涡环的旋向相反, 端面的约束作用使得两个涡环都被严格约束在射流棒端面之内, 且一次涡环强度显著大于二次涡环强度. 最后, 运用本征正交分解方法对射流间隙内的流动模态及其能量分布进行了分析. 单涡和双涡模式前十阶模态分析结果表明: 能量脉动在较低阶时即以配对的模式出现, 这表明一次涡环与二次涡环均具有良好的对称性, 同时在双涡模式中, 一次涡环是占主导作用的大尺度流动结构. 卷吸模式的前三阶模态分析表明: 射流的能量集中在射流上游, 能量随紊动扩散急剧衰减.     

Chromatic dispersion monitoring technique based on chirped pilot tones

We report on a chromatic dispersion monitoring technique using a direct detection of high-speed chirped pilot tones. Unlike the previously proposed monitoring technique using amplitude-modulated (AM) and phase-modulated (PM) pilot tones, the proposed technique can discriminate the sign of accumulated dispersion. The results show that the performance of this technique could not be seriously deteriorated by polarization-mode dispersion (PMD) and self-phase modulation (SPM) since the tone frequency was small (∼2 GHz).     

Heat transfer from an obliquely impinging circular, air jet to a flat plate

A series of experiments was conducted for the measurement of local convective heat transfer coefficients for an obliquely impinging circular air jet to a flat plate. In the experiments, the oblique angles selected were 90°, 75°, 60° and 45°, with 90° being a vertical jet. Two different Reynolds numbers of 10,000 and 23,000 were considered for the purpose of comparison with previous data available in the literature. Another parameter varied in the measurements was the dimensionless jet-to-plate distance, L/D. Four values of L/D(2, 4, 7, and 10) were considered in the experiments. The experiments were conducted using the preheated wall transient liquid-crystal technique. Liquid-crystal color changes were recorded with a video system. Local convective heat transfer coefficients were obtained through the surface transient temperatures that were related to the recorded color information. Detailed local heat transfer coefficients were presented and discussed in relation to the asymmetric wall jet upon impingement of the jet flow. Results of experiments show that, for a given flow situation, the point of maximum heat transfer shifts away from the geometrical impingement point toward the compression side of the wall jet on the axis of symmetry. The shift is more pronounced with a smaller oblique angle (larger jet inclination) and a smaller jet-to-plate distance. Comparisons of experimental results with existing heat transfer data for both obliquely impinging jets and vertical impinging jets are made. The effect of oblique angles on heat transfer was assessed.     

基于文本信息的上市中小企业财务困境预测研究

本文通过网络爬虫获取上市中小企业相关的文本信息,包括以年报为代表的信息披露报告和互联网新闻媒体报道的文本内容,采用词袋方法基于不同特征词词表对这些文本内容进行了量化分析,并以财务变量模型为基础对文本信息量化指标在财务困境预测中的作用进行了实证检验,结果表明由信息披露报告构建的管理层语调变量以及由新闻媒体报道构建的报道倾向变量、负面报道比例变量确实可以提高财务困境模型的拟合度和预测能力,而且在对不同类型文本信息的分析应有不同的侧重点。尽管本文针对的是上市中小企业,但并未考虑市场交易信息,因而可以推广到未上市交易的中小企业。     

Computation of aeolian tone from a circular cylinder using source models

The generation of aeolian tones from a two-dimensional circular cylinder situated in a uniform cross-flow is investigated. The major emphasis here is placed on identifying the important noise generation mechanisms. Acoustic-viscous splitting techniques are utilized to compute modelled acoustic source terms and their corresponding acoustic fields. The incompressible Reynolds averaged Navier-Stokes equation is used to compute the near-field viscous flow solution, from which modelled acoustic source terms are extracted based on an approximation to the Lighthill’s stress tensor. Acoustic fields are then computed with an acoustic solver to solve the linearized Euler equations forced by the modelled source terms. Computations of the acoustic field based on the approximated Lighthill’s stress tensor are shown to be in good agreement with those computed from the surface dipole sources obtained using Curle’s solution to the acoustic analogy. It is shown in this paper that the stress tensor source term in the streamwise direction makes a comparable, but slightly larger contribution to the overall radiated field, compared with that due to the stress tensor in the direction normal to the mean flow. In addition, it is shown that shear sources, which arise due to the interaction between the fluctuating velocity and the background steady mean velocity, make the greatest contribution to the acoustic field, while the self-noise sources, which represents the interaction between the fluctuating velocities, is shown to be comparably negligible.     

基于引导滤波的iCAM06色调映射算法

高动态范围图像原始数据在获取和合成过程中会出现异常值,进而影响色调映射后的低动态范围图像显示效果。为了解决此问题,提出了一种基于图像引导滤波的图像色貌模型(iCAM06)色调映射算法。该算法使用具有较强平滑作用的引导滤波代替双边滤波,将输入数据分成细节层和基本层,分别对细节层和基本层进行处理。为了使映射后的图像更加符合人眼感知效果,对色适应矩阵CAT02进行了调整。实验结果表明,与相关算法相比较,该算法减少了由于数据异常造成的显著噪声点,避免了伪影和偏色现象,使细节得到了较好的保持。信息熵、方差和清晰度等客观指标也证明了该算法的有效性。