Identification of defect sites on oxide surfaces by metastable impact electron spectroscopy

In this review, thin films of SiO₂ on Mo(1 1 2) and MgO(1 0 0) on Mo(1 0 0) have been characterized using metastable impact electron and ultraviolet photoelectron spectroscopies (metastable impact electron spectroscopy (MIES) and ultraviolet photoelectron spectroscopy). The electronic and chemical properties of the thin films are identical to those of the corresponding bulk oxides. For different prepared defective SiO₂ surfaces, additional features are observed in the band-gap region. These features arise from vacancies or excess oxygen and are consistent with theoretical predictions of additional occupied states in the band-gap due to point defects. Extended defect sites on SiO₂ and MgO are identified using MIES by a narrowing of the O(2p) features with a reduction in the density of extended defect sites. MIES of adsorbed Xe (MAX) is also used to estimate the density of extended defect sites. Furthermore, it is shown that CO is an appropriate probe molecule for estimating the defect density of MgO surfaces. Upon Ag exposure, the change in the work function of a low defect MgO(1 0 0) versus a high defect surface is markedly different. For a sputter-damaged MgO(1 0 0) surface, an initial decrease of the work function was found, implying that small Ag clusters on this surface are electron deficient. In contrast, for SiO₂ no significant change of the work function upon Ag exposure with increasing defect density was observed. On MgO(1 0 0), the presence of defect sites markedly alter the electronic and chemical properties of supported Ag clusters. Such a strong influence of defect sites was not found for Ag clusters on SiO₂.     

Analytical chemistry and the cone penetrometer: In situ chemical characterization of the subsurface

The development of novel microanalytical techniques forin situ chemical characterization of the terrestrial subsurface environment has grown significantly over the last decade, particularly those instruments that are interfaced to the cone penetrometer. Cone penetrometer testing (CPT) has emerged as an effective means to introduce samplers and probes forin situ analysis of contaminants in soil and groundwater matrices. A variety ofin situ chemical samplers for CPT have been developed that can be driven into the subsurface to collect soil gas, groundwater, or soil samples at depth, thus providing a means of determining the vertical and horizontal extent of contamination. Cone penetrometer testing is also being explored as a means to deliverin situ subsurface sensor probes, including probes based on laser-induced fluorescence, Raman, and infrared spectroscopies for organics; on laser-induced breakdown and X-ray fluorescence spectroscopies for heavy metals; and on passive gamma-ray spectroscopy for radionuclides. The range of analytical technologies used in CPT for the determination of organic and inorganic species in the subsurface is described.     

A new approach in assessing microbiological results in water analysis proficiency testing

Due to the relatively large spread in the results of microbiological proficiency tests, the z-scores are often not able to detect zero or low results as being ‘bad’ results. This paper describes an adapted z-score based on the average or the standard deviation of the 50% ‘highest’ results. The combination of the adapted z-scores of four samples enables a better judgement of the performance of each laboratory. Papers published in this section do not necessarily reflect the opinion of the Editors, the Editorial Board or the Publisher.     

Capillary liquid chromatography as a tool for separation of hydrophobic basic drugs. Relation between tests for column characterization and real analysis

Two capillary columns for reversed phase (RP) capillary liquid chromatography (CLC), viz. Nucleosil 100‐5 C18 and LiChrosorb RP‐select B, were characterized by the Walters test, i.e. the chromatographic test proposed for RP stationary phases. Hydrophobicity indices were determined not only in acetonitrile/water mobile phase, as proposed in the test, but they were also measured in buffered systems. This approach was used to quantify the influence of mobile phase composition on the modification of the surface of the stationary phases. In the next step, small basic compounds differing in their hydrophobicity and basicity were selected and their retention on the stationary phases in mobile phases of the same composition as used for column testing was examined. Furthermore, the retention of newly synthesized drugs, chemotherapeutics derived from thioacridine and pyridoquinoline, differing in their structures, basicity, and hydrophobicity, was also studied. The composition of the mobile phases had to be shifted to higher contents of organic modifiers – acetonitrile or methanol – in order to elute these hydrophobic compounds from the columns. The question we wanted to answer was: How is the method for testing of reversed phases related to retention, separation efficiency, and peak symmetry of various analytes?     

IMPACT MODEL RESOLUTION ON PAINLEVE’S PARADOX

Painlevé‘s paradox is one of the basic difficulties for solving LCP of dynamic systems subjected to unilateral constraints. A bi-nonlinear parameterized impact model, consistent with dynamic principles and experimental results, is established on the localized and quasi-static impact model theory. Numerical simulations are carried out on the dynamic motion of Painlevé‘s example. The results confirm ““““impact without collision““““ in the inconsistent states of the system. A ““““critical normal force““““ which brings an important effect on the future movement of the system in the indeterminate states is found. After the motion pattern for the impact process is obtained from numerical results, a rule of the velocity‘s jump that incorporates the tangential impact process is deduced by using an approximate impulse theory and the coefficient of restitution defined by Stronge. The results of the jump rule are quite precise if the system rigidity is big enough.     

Detection of stress whitening in plastics with the help of X-ray dark field imaging

The processing of thermoplastics can induce a wide range of defects such as stress whitening, cavitation and porosity, which can adversely affect the reliability of the final products. Hence, fast and effective non-destructive detection methods for such defects are highly important for quality assurance on production lines. In this paper, X-ray dark field imaging is presented as a new non-destructive testing method that allows the visualization of stress whitening or cavitation efficiently. The performance of the method is demonstrated for the case of an injection-moulded polyvinylidene fluoride part that exhibits stress whitening. Whereas the stress whitening could not be detected by conventional X-ray imaging, it was localized by an X-ray dark field image acquired within a few minutes. Once the precise location of the stress whitening was known, it was possible to verify the result by local micro X-ray computed tomography and by a micro section image.     

Experimental and numerical investigation of aramid fibre reinforced laminates subjected to low velocity impact

The low velocity impact performance of domestic aramid fibre reinforced laminates is investigated experimentally and numerically. Laminates with different thicknesses are impacted by drop-weight test machine under different impact energies. The time histories of impact force are recorded and ultrasonic C-scan technology is used to inspect the internal damage of the laminates. Numerical simulation is conducted using finite element method (FEM), taking into account both intralaminar and interlaminar damage. The intralaminar damage model is based on the continuum damage mechanics (CDM) approach, which consists of the strain-based Hashin failure criteria and the exponential damage evolution law, and considers the nonlinear shear behaviour of the material. The interlaminar damage is simulated by interface elements with cohesive zone model. The numerical results show good agreements with the experiments, thus verifying the validity of the presented numerical model.     

痰涂片阳性肺结核患者分枝杆菌培养及药敏结果743例分析

目的研究衢州地区痰涂片阳性肺结核患者对常用抗结核药物的耐药情况,为结核病控制和临床用药提供对策.方法对衢州地区的743例痰涂片阳性肺结核患者痰标本进行酸性改良罗氏培养基痰培养,将培养阳性菌株以硝基苯甲酸(PNB)培养基和噻吩-2-2羧酸肼(TCH)培养基进行菌种鉴定,采用绝对浓度间接法对异烟肼(INH)、利福平(RFP)、链霉素(SM)、氧氟沙星(OFLX)、乙胺丁醇(EMB)、卡那霉素(KM)6种抗结核药物进行敏感性试验.结果743例获得菌种鉴定和药物敏感试验结果者中有结核分枝杆菌复合群728例(97.98%),非结核分枝杆菌15例(2.02%).728例结核分枝杆菌复合群中总耐药率为26.63%,初治耐药率为19.35%,复治耐药率为57.32%;总耐多药率为5.36%,初治耐多药率1.39%,复治耐多药率36.59%.6种抗结核药物的耐药顺序依次为INH 8.20%、SM 7.74%、OFLX 4.80%、RFP 1.86%、KM 1.24%、EMB 1.08%.结论衢州地区肺结核患者中耐药情况较为严重,应开展分枝杆菌培养和药敏试验并根据药敏结果组成个体化化疗方案,同时进一步落实和提高非住院肺结核患者全面监督化学治疗(DOTS)质量,提高各类患者的治愈率,减少各种耐药的发生概率.     

Enhanced chemical reworkability of DGEBA thermosets cured with rare earth triflates using aromatic hyperbranched polyesters (HBP) and multiarm star HBP‐b‐poly(ε‐caprolactone) as modifiers

A hyperbranched aromatic polyester (HBPOH) has been synthesized, and poly(ε‐caprolactone) arms have been grown on some of its end hydroxyl groups (HBPCL). These modifiers have been used in cationic diglycidyl ether of bisphenol A formulations cured with ytterbium triflate as cationic initiator. The effect of HBPOH and HBPCL on the curing kinetics has been studied using differential scanning calorimetry (DSC). The obtained materials have been characterized by dynamomechanical analysis, DSC, thermogravimetric analysis and mechanical tests. The modifiers are incorporated into the thermosetting network because of the participation of the end hydroxyl groups in the cationic curing of epoxides by the activated monomer mechanism. Homogeneous thermosets have been obtained with a remarkable increase in impact strength without sacrificing elastic modulus or hardness. A compromise between the rigid structure of the aromatic hyperbranched core and the flexibilizing effect of the poly(ε‐caprolactone) arms is believed to be responsible for the overall thermal and mechanical properties of the materials. The use of these polymeric modifiers increases the thermal stability of the resulting materials because of the low degradability of the aromatic ester groups in the hyperbranched core and the incorporation of the modifier into the network structure. However, the presence of such ester groups makes them reworkable by hydrolysis or alcoholysis in an alkaline medium, thus opening a way for recovery of valuable substrates. Copyright © 2013 John Wiley & Sons, Ltd.     

Ranking Oxidant Sensitiveness: A Guide for Synthetic Utility

Common oxidants used in chemical synthesis, including newly developed perruthenates, were evaluated in the context of understanding (and better appreciating) the sensitiveness and associated potential hazards of these reagents. Analysis using sealed cell differential scanning calorimetry (scDSC) facilitated Yoshida correlations, which were compared to impact sensitiveness and electrostatic discharge experiments (ESD), that enabled sensitiveness ranking. Methyltriphenylphoshonium perruthenate (MTP3, 8 ), isoamyltriphenylphosphonium perruthenate (ATP3, 7 ) and tetraphenylphosphonium perruthenate (TP3, 9 ) were found to be the most sensitive followed by 2-iodoxybenzoic acid (IBX, 2 ) and benzoyl peroxide (BPO, 10 ), whereas the most benign were observed to be Oxone ( 12 ), manganese dioxide (MnO₂, 13 ), and N-bromosuccinimide (NBS, 17 ).