Impact resistance analysis of flexible fabric by 3D shape of impact basin in low-speed impact test

Hopkinson non-penetrating low-speed impact test was carried out on Kevlar flexible fabrics. The impact basin was formed by the clay on the back of the fabric, and the ultimate deformation of the fabric was recorded completely. The 3D shape of the clay impact basin was measured by fringe projection profilometry and converted into the impact basin volume. At the same time, the relationship between the indentation volume and the deformation energy of the clay was calibrated using the clay intrusion test. The clay impact basin volume is then converted into the residual energy of the flexible fabric subjected to the low-speed impact, and a new index of the impact basin volume is established to evaluate the energy absorption efficiency of fabric under the low-speed impact. Finally, combined with the deformation of single-layer fabric, the stress wave propagation in the impact deformation process of fabric is discussed, which is helpful to understand the impact energy absorption mechanism of flexible fabric.     

Enhancing toughness of poly (lactic acid)/Thermoplastic polyurethane blends via increasing interface compatibility by polyurethane elastomer prepolymer and its toughening mechanism

Due to the environmental pollution caused by the petroleum-based polymer, poly (lactic acid) (PLA), a biodegradable and biocompatible polymer that obtained from natural and renewable sources, has attracted widespread attention. However, the brittleness of PLA greatly limits its application. In this study, the super toughened PLA-based blends were obtained by compatibilizing the PLA/thermoplastic polyurethane (TPU) blends with the polyurethane elastomer prepolymer (PUEP) as an active compatibilizer. The mechanical properties, thermal properties and corresponding toughening mechanism of PLA/TPU/PUEP system were studied by tensile test, instrumented impact test, dynamic mechanical analysis (DMA), scanning electronic microscope (SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). All the results demonstrate that the isocyanate (−NCO) group in PUEP is successfully reacted with the –OH groups at both sides of the PLA and the obtained polyurethane (PU)~PLA copolymer (PU ~ cõ PLA) significantly improves the interfacial compatibility of PLA/TPU blends. The gradually refined dispersed phase size and fuzzy phase interface as displayed in SEM images suggest a good interfacial compatibilization in the PLA/TPU/PUEP blends, probably due to the isocyanate reaction between PLA and PUEP. And the interfacial reaction and compatibilization among the components led to the formation of super toughened PLA/TPU/PUEP blends. And the instrumented impact results indicate that most of the impact toughness is provided by the crack propagation rather than the crack initiation during the entire fracture process.     

Performance of high-temperature thermosetting polyimide composites modified with thermoplastic polyimide

The preparation of polyimide (PI) resin with high heat resistance and toughness is a significant challenge. In this study, thermoplastic PI (TPI) was used to toughen thermosetting PIs, and toughened PI (TPI/PI) blends were prepared. The modified PI resin system exhibited good thermal stability, excellent heat resistance, and high toughness. The results indicated that the TPI/PI blends maintained the curing behavior and characteristics of the PI oligomer. The T_g of the cured TPI/PI blend exceeded 395 °C, and the T_5% values were in the range of 533–563 °C, suggesting excellent thermal stability and heat resistance. The maximum impact strength was increased by 46% compared with that of pure PI, indicating the excellent toughening effect of the TPI. Carbon fiber-reinforced PI composites were prepared using the toughening system as a matrix. The compression-after-impact values of the carbon fiber-reinforced PI composites were up to 190 MPa, indicating the excellent toughness of the materials.     

Dynamic fracture testing of polymethyl-methacrylate (PMMA) single-edge notched beam

Dynamic fracture in single-edge notched polymethyl-methacrylate (PMMA) beams have been investigated by three-point-bending impact testing with a drop-weight machine. A high-speed camera combined with the digital image correlation (DIC) method is used to capture the impact-induced crack initiation and propagation, as well as the beam deformation fields and the open mode strain at the original notch tip. The crack propagation length is recorded and the instantaneous crack velocity is calculated. Furthermore, the dynamic fracture toughness K_Id is quantified from the loading-displacement relations at different impact velocities. The effects of the impact velocity and impact energy on dynamic fracture toughness, fracture initiation strain, as well as the corresponding influences on the fracture propagation velocity, are discussed.     

Comprehensive separation of iridoid glycosides and triterpenoid saponins from Dipsacus asper with salt‐containing solvent by high‐speed countercurrent chromatography coupled with recycling mode

The roots of Dipsacus asper Wall as a commonly used traditional Chinese medicine are used for tonifying liver and kidney and strengthening bones and muscles. However, an effective separation strategy for comprehensive and rapid separation of the main active compounds from the roots of D. asper is nonexistent. This investigation provided an effective separation method based on AB‐8 macroporous resin column chromatography using different ratios of ethanol in water and two different modes of high‐speed countercurrent chromatography with salt‐containing solvent system for rapid enrichment and separation from the roots of D. asper. The macroporous resin column chromatography was performed on AB‐8 resin using ethanol in water ratios of 10, 30, 40, 50, and 80% as the optimized enrichment conditions for iridoid glycosides and triterpenoid saponins with different polarities. For high‐speed countercurrent chromatography separation, the conventional and recycling modes were combined together to develop a strategy for 12 compounds ( 1 – 12 ) from the enriched parts of 30, 40, and 80% ethanol, including six high‐polarity iridoid glycosides ( 1 – 6 ) using inorganic salt‐containing solvent system and six triterpenoid saponins ( 7 – 12 ). Recycling high‐speed countercurrent chromatography separation was successfully applied to separate two isomers ( 9 and 10 ) after 11 cycles.     

碳纤维复合材料冲击模型率相关修正方法与试验研究

目前先进航空发动机的风扇叶片均采用复合材料结构,为了研究其在工作过程中可能受到的冲击损伤,即碳纤维增强树脂基复合材料受到高速冲击后的损伤与破坏过程,对其准静态下的正交各向异性本构模型和失效准则进行修正,建立了应变率相关的三维动态本构及损伤模型．该模型考虑了材料模量、强度和断裂韧性与应变率的相关性,并采用基于断裂韧性的渐进损伤模式对刚度进行折减来控制破坏过程．开展了不同应变率下的动态试验,得到基体方向拉伸与剪切的动态响应数据,拟合得到相应的动态修正因子．将该模型结合修正因子植入数值软件进行仿真计算,分析结果表明,所建立的率相关本构及损伤模型能够更准确地模拟层合板受冲击过程的损伤和破坏,与试验吻合较好．     

基于光滑粒子流体动力学的滑油泵数值仿真

基于光滑粒子流体动力学方法,构建齿轮泵壳体及内部流体的粒子模型,对内啮合齿轮泵在不同工况下的流量特性进行数值模拟。首先设置了均匀分布的油泵出入口压强,计算得到的流量结果与试验结果吻合,且在中低转速下流量与转速呈线性关系;针对高转速下油泵流量降低的问题,通过适当减小周期模型内部的流体粒子数反映流量降低,获得了与试验值相吻合的连续转速流量的模拟结果;针对影响齿轮泵性能的间隙和空化现象,结合模型特点给出了相应的近似处理方法。通过以上研究,将SPH方法成功地应用于滑油泵问题的分析计算。     

滑坡冲击铲刮变量的计算方法研究

高速远程滑坡运动过程中,冲击铲刮效应不仅增加滑坡的体积与规模,而且会增大滑坡成灾范围,风险预测与判断出现明显误差,导致灾难性事件的发生。目前对于高速滑坡的铲刮深度、铲刮范围和铲刮体积等变量计算往往是采用基于经验的铲刮率算法,其是通过体积增量来反算铲刮变量的数学方法,而实际情况中高速滑坡的冲击铲刮是滑体冲击力和地表可铲刮材料之间的力学屈服破坏作用的结果。本文基于接触力学、弹塑性力学和岩土力学,提出了地表可铲刮层在附加冲击荷载作用下铲刮变量的理论计算方法,认为竖向冲击和切向剪切是滑体冲击铲刮过程的两种主要作用方式。结合实际岩土体材料参数,发现不考虑切向荷载时,铲刮层塑性区主要以竖向破裂区为主,考虑切向荷载时,铲刮层塑性区沿切向迁移,直至塑性边界贯通至地表,符合实际情况,实现了对铲刮变量的定量化计算。     

基于FDM-DEM耦合的冲击损伤大理岩静态断裂力学特征研究

为探究循环冲击损伤后大理岩的静态断裂力学特征,基于有限差分（finite difference method,FDM）-离散元（discrete element method,DEM）耦合的建模技术构建了三维分离式霍普金森压杆（split Hopkinson pressure bar,SHPB）数值模型,其中杆件系统和岩石试件分别采用FLAC3D和PFC3D程序建模。利用该模型对中心直切槽半圆盘（NSCB）试样进行了恒定子弹速度下的循环冲击,随后对受损试样进行静态三点弯曲断裂实验。通过编写Fish程序,提取试样断裂面数据,对断裂面进行重构并定量计算表面粗糙度。通过与相关室内实验结果的对比分析,验证了本文数值分析的合理性与可靠性。模拟结果表明,随着循环冲击次数的增加,试样内部微裂纹、破碎颗粒均增加。连接力场分布混乱,部分力链发生断裂。力链的变化是试样力学性能劣化的根本原因。在静态三点弯曲断裂实验中,冲击5次后试样的静态断裂韧度较天然试样产生一定程度的降低。试样在静载过程中产生的微裂纹和碎块的数量随循环冲击次数的增加而增加,断裂面粗糙度随循环冲击次数的增加而增加。