Total cross-sections for positron scattering by a series of molecules

The additivity rule is employed to obtain the total (elastic+inelastic) cross-sections for positron scattering from molecules including a number of diatomic, polyatomic molecules (H₂, N₂, HCl, CO₂, NH₃, SF₆, CH₄, C₂H₄ and C₃H₈) over an incident energy range of 10-1000 eV. The total cross-sections (TCS) of the constituent atoms of molecules are obtained by employing a complex optical model potential (composed of static, polarization and absorption potential). The present results are compared with experimental data and other theoretical calculations, good agreement is obtained in intermediate- and high-energy region. Received: 11 November 1997 / Revised: 23 March 1998 / Accepted: 16 June 1998     

Viscoelastic characterization of compacted pharmaceutical excipient materials by analysis of frequency-dependent mechanical relaxation processes

A newly developed method for determining the frequency-dependent complex Young's modulus was employed to analyze the mechanical response of compacted microcrystalline cellulose, sorbitol, ethyl cellulose and starch for frequencies up to 20 kHz. A Debye-like relaxation was observed in all the studied pharmaceutical excipient materials and a comparison with corresponding dielectric spectroscopy data was made. The location in frequency of the relaxation peak was shown to correlate to the measured tensile strength of the tablets, and the relaxation was interpreted as the vibrational response of the interparticle hydrogen and van der Waals bindings in the tablets. Further, the measured relaxation strength, holding information about the energy loss involved in the relaxation processes, showed that the weakest material in terms of tensile strength, starch, is the material among the four tested ones that is able to absorb the most energy within its structure when exposed to external perturbations inducing vibrations in the studied frequency range. The results indicate that mechanical relaxation analysis performed over relatively broad frequency ranges should be useful for predicting material properties of importance for the functionality of a material in applications such as, e.g., drug delivery, drug storage and handling, and also for clarifying the origin of hitherto unexplained molecular processes.     

Deformational Properties of Irradiated Composite Materials Based on PET and PE

Considering the wide applicability of polymeric composite materials, heterogeneous blends of poly(ethylene terephtalate) (PET) and polyethylenes of high and low densities (HDPE and LDPE, respectively) were investigated. Rheological (the flow-behavior index), mechanical (the yield strength and the Charpy impact strength), and morphological (crystallinity and the melting temperature) properties were detected for individual blend components and different blend compositions. A radiation treatment (-rays) was applied to improve certain characteristics of the heterogeneous blends. The results of this investigation show that the radiation modification can be successfully used to improve some physical properties of the PET-based blends and to choose individual blend components, optimum irradiation conditions, and desirable blend compositions, which allows producing materials with a predictable set of mechanical properties.     

A novel electron scattering apparatus combining a laser photoelectron source and a triply differentially pumped supersonic beam target: characterization and results for the resonance

A novel electron scattering apparatus for high resolution studies of angle-differential elastic and inelastic electron scattering from atoms and molecules in the gas phase is described and its performance characterized. It combines a laser photoelectron source, a triply differentially pumped collimated supersonic beam target (half angle 0.015 rad, background to beam density ratio < 0.01), and several electron multipliers for simultaneous detection of elastically scattered electrons and metastable atoms (or molecules) due to inelastic scattering. In detailed test measurements of the yield for the production of metastable He^*(2³S₁) atoms around its threshold, the dependence of the overall energy width on various experimental parameters has been investigated. So far a resolution down to 7 meV (FWHM) has been obtained. Under such conditions we have investigated the profile of the He^- (1 s 2 s ^{2 2} S _1/2 ) resonance at the scattering angles 22 ^° , 45 ^° , and 90 ^° . From a consistent fit of the measured profiles by resonant scattering theory we determine a new value for the resonance energy ( E _r = 19.365(1) eV) and an accurate resonance width ( Γ = 11.2(5) meV). These results are consistent with the previously recommended values. Received 23 July 2002 Published online 29 October 2002 RID="a" ID="a"e-mail: hotop@physik.uni-kl.de RID="b" ID="b"Permanent address: Department of Physics and Astronomy, Drake University, Des Moines, IA 50311, USA.     

Theoretical total ionization cross-sections of CH x,CF x,SiH x,SiF x ( ) and CCl 4 targets by electron impact

Total ionization cross-sections of electron impact are calculated for the molecular targets CH_x, CF_x, SiH_x, SiF_x (x = 1-4) and CCl₄ at incident energies 20-3 000 eV. The calculation is based on Complex Scattering Potential approach, as developed by us recently. This leads to total inelastic cross-sections, from which the total ionization cross-sections are extracted by reasonable physical arguments. Extensive comparisons are made here with the previous theoretical and experimental data. The present results are satisfactory except for the CF_x and SiF_x (x = 1-3) radicals, for which the experimental data are lower than most of the theories by more than 50%. Received 23 May 2002 / Received in final form 24 October 2002 Published online 21 January 2003 RID="a" ID="a"e-mail: knjoshipura@yahoo.com     

Study of the conditions for the effective energy transfer in a process of acceleration and collision of the thin metal disks with the massive target

Efficiency studies of laser driven thin metal disks acceleration using the first harmonic (λ₁=1.315 μm) of the Prague Asterix Laser System (PALS) and subsequent craters creation produced by collisions of these disks with massive targets are presented. Several different disks made of aluminium and copper foils with diameters of 300 μm and 600 μm and thicknesses of 11 μm (Al) and 3.6 μ m (Cu) were employed. Disks were placed at the distance of either 100 μ m or 300 μm in front of aluminium massive targets. The following irradiation conditions were used: the laser beam energy of 120 J, the focal spot diameter of 200 μm, and the pulse duration of 0.4 ns (FWHM). A three-frame interferometric system was employed to determine electron density distributions in plasma corona. Shape and volume of craters were obtained by crater replica technology and microscopy measurements. The aim of these investigations was to analyse conditions leading to the most effective energy transfer in the process of collision of the accelerated disks with solid targets. The overall efficiency of these processes was characterized by the volume of craters produced in such targets.     

Electron-impact dissociation and transient properties of a stored LiH2 - beam

The fragmentation of LiH₂ ^- anions after electron impact was investigated at the heavy-ion storage ring TSR. The main reaction channel was found to be electron detachment followed by a breakup into LiH + H. In the first ms after production of the molecular ions in a cesium sputtering ion source, additional contributions were observed in the Li + H₂ and Li^- + H₂ channels, hinting at an initial population of a short-lived state of the anion. To gain a better understanding of the mechanisms underlying the observed behavior of the system, ab initio calculations of relevant potential energy surfaces were performed at selected geometries. The experimental findings are discussed in the light of these calculations.     

Experimental and FEM study of windshield subjected to high speed bird impact

Both experimental and finite element model (FEM) results are presented for the dynamic strength behavior of windshield subjected to bird impact. The experimental data taken from a series of high speed photographs are compared with the numerical results predicted by using FEM in which the windshield was modeled entirely with solid elements and the bird body was approximately simulated by an elastic-plastic material with failure element behavior. Effective plastic strain and element pressure were adopted as the failure criteria and once the pressure or the effective plastic strain of an element reached the critical value, the element would lose the tensile resistance capability completely. The deflection and stress distribution in the windshield were obtained. It is shown that the result from the finite element analysis agrees with those from the full-scale bird impact test. The project supported by the National Natural Science Foundation of China (10272011)     

Synthesis and Structure Control of A New Kind of Inelastomer Impact Modifier with Core-shell Structure and Impact Modification to PVC/CPE

Introduction　　 As a structure material,a polymer has two important mechanical properties,i.e.,strength and toughing.Therefore,plastic toughening isalwaysa fundamental study on poly-mer materials.Traditionally,toughnessmodification isto make rubberasan elastomerimpactmodifier dispersed to plastic matrix which is hence toughened[1 ,2 ] .But as the toughness ofplastic is improved,the elastomerimpactmodifieralso reducesthe othermechanical propertiesof the material.Consequently,whether rigid par…     

两种离子化技术气相色谱-质谱法测定橄榄油中甾醇烯类物质的比较

分别采用电子轰击(EI)和正化学电离(PCI)两种离子源技术建立了气相色谱-质谱联用法(GC-MS)同时测定橄榄油中3,5-菜甾二烯、3,5,22-豆甾三烯和3,5-豆甾二烯3种甾醇烯含量的方法,并对这两种方法进行了比较。样品经石油醚溶解,硅胶柱净化后,分别采用GC-EI/MS和GC-PCI/MS分时段选择离子监测模式进行测定,以3,5-胆甾二烯为内标进行定量。结果表明,两种方法的线性、准确度、精密度、灵敏度均较好。3,5-菜甾二烯、3,5,22-豆甾三烯和3,5-豆甾二烯分别在0.024~0.48、0.02~0.50和0.03~0.75 mg/L浓度范围内线性关系良好(r>0.999)。在3个加标水平下,GC-EI/MS和GC-PCI/MS的平均回收率分别为88.7%~99.5%、87.1%~109.2%,两种检测方法的相对标准偏差(RSD,n=6)均不超过8.3%。定量限(S/N=10)分别为0.03 mg/kg(EI),0.03~0.10 mg/kg(PCI)。通过对两种方法的比较研究发现,EI能提供更多碎片离子和结构信息,而PCI中则主要为准分子离子及反应气加合离子。应用于样品中甾醇烯的测定时,PCI的选择性和抗干扰能力明显优于EI。两种方法可相互补充和替代应用于日常检测中。