Synthesis and characterisation of bis(pentafluorophenyl)antimony(V) cations, [(C6F5)2SbL3]

Pentacoordinate complex cations of the general formula [(C₆F₅)₂SbL₃]³⁺ stabilized as solid salts in combination with tetraphenylborate (BPh₄), tetrafluorobroate (BF₄) anions, where L=DMSO, Ph₃AsO, PyO, DMF, α-, β- and γ-picoline have been isolated. The newly formed complexes were characterized by elemental analysis, molar conductance measurements, solid-state IR and and NMR. From these results, a five-fold coordination around antimony was required.     

Fabrication of PbTiO3 Ceramic Fibers by Sol-Gel Processing

The sol-gel processing was applied to the fabrication of PbTiO₃ fibers. Pb(CH₃COO)₂·3H₂O and Ti(OC₃H ₇ ⁱ )₄ were refluxed with stirring in 2-methoxyethanol to form Pb-methoxyethoxide and Ti-methoxyethoxide, respectively, followed by mixing with stirring in 2-methoxyethanol to form Pb−Ti double alkoxide. The hydrolysis and polycondensation reaction of this double alkoxide gave polymerized products, and as a result the viscosity of the solution increased, suggesting that linear polymers were produced through the hydrolysis and polycondensation reaction. Homogeneous PbTiO₃ gel fibers were drawn from the spinnable viscous solutions, which were wellcrystallized into perovskite type PbTiO₃ at 650°C. The heat-treated fibers were a few centimeters long and from 10 to 100 μm in diameter. The fiber was made up of extremely uniform grains. Electron diffraction revealed a preferred growth of (101) planes along the fiber axis, which might be due to the linear molecular characteristics of the alkoxide.     

SiO2包覆纳米CaCO3的透射电镜表征

在透射电子显微镜（TEM）电子衍射模式下，用适当孔径的物镜光阑选择非晶态SiO2的衍射区域，拍摄以溶胶一凝胶法制备的SiO2包覆纳米CaCO3的暗场像。与未经包覆SiO2的纳米CaCO3的暗场像作对比，可以看出经过SiO2包覆的纳米CaCO3粒子周围有一白色亮环，从而得到SiO3包覆层的暗场照片。用高分辨方法观察了包覆层与CaCO3粒子间的界面情况。     

铁矿粉化学热加工中亚铁含量的测定

提出了一种铁矿粉热加工生产工艺中亚铁含量测定的新方法。在氮气保护下，用盐酸溶出样中的亚铁，在硫磷混酸介质中以重铬酸钾标准溶液滴定，并对溶样条件进行了研究。该方法简单、快速、准确，已成功地应用于氧化催化法生产氧化铁中亚铁的控制分析和成品鉴定。     

High modulus polyimide/polyimide molecular composite films that utilize acetylene unit as a crosslink site

Polyimide/polyimide molecular composite (MC) films comprised of a rigid polyimide derived from biphenyltetracarboxylic dianhydride (BPDA) and p-phenylenediamine (PDA) and a flexible polyimide derived from BPDA and bis (3,3'-diaminodiphenyl) acetylene (intA) and/or oxydianiline (ODA) were prepared by blending the polyamic acid solutions in 7 : 3 weight ratio, and then imidizing the blend films. Acetylene content in the flexible polyimide backbone was controlled by the ratio of intA and ODA. Cold-drawing of the blend polyamic acid films, followed by imidization, gives high modulus polyimide/polyimide MC films. The modulus of the MC films increased almost linearly with the draw ratio, reaching 25.5 GPa for the 40% drawn film. Acetylene groups in the flexible polyimide can be thermally cured to crosslink. The onset of exotherm appeared at 340°C on DSC, reaching maximum at 398°C. After the thermal crosslinking, the MC films maintained the high modulus, though elongation became small. Taking advantage of the crosslinkable acetylene units, two MC films were laminated and processed at 400°C for 20 min under 100 kg/cm² to give a good-quality laminate film. The interface of the two films was strongly bonded through the crosslinking of acetylene groups. Laminate films maintained the high modulus afforded by the cold-drawing. © 1994 John Wiley & Sons, Inc.     

溴碘化银薄片乳剂颗粒中碘离子分布对潜影分散的影响

碘溴化银乳剂薄片颗粒的潜影分散与碘离子在颗粒中的分布有关。本文用交叉光楔曝光技术测定了由次潜影造成的潜影分散,并根据所测出的潜影分散度和乳剂的表面感光度,对内、表敏的分布作了分析。结果表明,碘离子分布在颗粒边缘的乳剂,其表面潜影分散度要比碘离子均匀分布的颗粒更甚,后者且表现出内、表敏度竞争的现象。     

分析信号处理方法的比较研究

研究了高效液相色谱－火焰原子吸收光谱联用系统分析信号处理方法，比较了各种处理方法的优缺点，用积分与适应平滑法综合处理色谱峰分析信号，不仅能有效地消除噪声，而且能使分析信号得到加强，以测定镍为例，经积分与适应平滑法综合处理后，检出限改善了２．７倍。     

岩石的核磁共振自旋密度微成像

岩，心是油气储层的基本单元，其内部结构和渗流性质反映了油藏的基本特征．岩。心的精细描述是油藏描述、储层动态监测及设计强化采油方案的重要基础．本文利用核磁共振（NMR）自旋密度做成像，快速无损地观测到两类基本储油岩石——砂岩和灰岩的内部结构，提供了岩石渗透性、孔隙性及灰岩沉积环境等重要信息．1实验方法以自旋回波单片NMR成像脉冲序列为基础，设。P平面内样品的目施密度为P（。，v）．演化期t。，在。方向梯度场G。作用下，各处横向磁化矢量获得的相移为式中，7为共振核（在成像中一般为质子）的旋磁比，g为坐标位置·…     

Crystallization Temperature Limit of (Ba,Sr)TiO<Subscript>3</Subscript> Thin Films Prepared by a Non Oxocarbonate Phase Forming CSD Route

A new chemical solution deposition (CSD) route for the fabrication of Ba_0.7Sr_0.3TiO₃ (BST) thin films has been developed which completely prevents the formation of an intermediate oxo-carbonate phase. The latter has been reported previously by several authors to be responsible for increased crystallization temperatures. Barium and strontium diaminoethoxides were synthesized starting from pure barium and strontium metal and aminoethanol. These alkoxides were found to be readily soluble in a wide range of solvents and thus were excellent candidates for the CSD process. To prepare a stable precursor solution the aminoalkoxides were dissolved in 2-butoxyethanol and then used for the deposition of BST thin films. We conclude that the minimum crystallization temperature of 600C to be independent of the formation of the oxo-carbonate phase. DTA-TGA were performed on the precursors and their solutions to study their decomposition behaviour. All films annealed at different temperatures were physically characterized by XRD, IR, and SEM. The films prepared by this route at 650C were found to have high dielectric constant and the leakage currents were comparable to BST films prepared by normal carboxylate based routes at 750C.     

Thermal degradation of vinylidene chloride/vinyl chloride copolymers in the presence of N-substituted maleimides

As a consequence of their excellent barrier properties vinyl chloride/vinylidene chloride copolymers have long been prominent in the flexible packaging market. While these polymers possess a number of superior characteristics, they tend to undergo thermally- induced degradative dehydrochlorination at process temperatures. This degradation must be controlled to permit processing of the polymers. Three series of N-substituted maleimides (N-alkyl-, N-aralkyl, and N-aryl) have been synthesized, characterized spectroscopically, and evaluated as potential stabilizers for a standard vinyl chloride/vinylidene chloride (85 mass%) copolymer. As surface blends with the polymer, these compounds are ineffective as stabilizers. However, significant stabilization may be achieved by pretreatment of the polymer with N-substituted maleimides. The most effective stabilization of the polymer is afforded by N-aralkyl- or N-arylmaleimides, most notably, N-benzylmaleimide and N-p-methoxyphenylmaleimide.