Effect of Controlled Deposition of ZnS Shell on the Photostability of CdTe Quantum Dots as Studied by Conventional Fluorescence and FCS Techniques

The effect of one and two monolayers of ZnS shells on the photostability of CdTe quantum dots (QDs) in aqueous and nonaqueous media has been studied by monitoring the fluorescence behavior of the QDs under ensemble and single‐molecule conditions. ZnS capping of the CdTe QDs leads to significant enhancement of the fluorescence brightness of these QDs. Considerable enhancement of the photostability of the shell‐protected QDs, including the suppression of photoactivation, is also observed. Fluorescence correlation spectroscopy measurements reveal an increase in the number of particles undergoing reversible fluorescent on–off transitions in the volume under observation with increasing excitation power; this effect is found to be more pronounced in the case of core‐only QDs than for core–shell QDs.     

实时直接分析-串联质谱法快速筛查火锅底料、牛肉面汤及调味料中罂粟壳生物碱

建立了采用实时直接分析-串联质谱(DART-MS/MS)对火锅底料、牛肉面汤及调味料中5种非法添加的罂粟壳生物碱进行快速筛查的方法。样品经乙腈提取净化后,在离子化温度为300℃、栅极电压为150 V、进样速率为0.8 m m/s的DART离子源正离子模式条件下进样,以电喷雾离子源正离子多反应监测(MRM)模式进行检测,实现了样品经简单预处理后使用DART-MS/MS进行检测的新方法。该方法简便、快速,能满足大批量非法添加样品的快速筛查分析要求。     

Simultaneous photocatalytic oxidation and adsorption for efficient As(III) removal by magnetic BiOI/γ-Fe2O3 core–shell nanoparticles

Addressing arsenite pollution in groundwater has drawn great attention. It is attractive to pre-oxidize highly mobile As(III) to relatively low-toxic As(V) with a subsequent adsorption separation process. Herein, BiOI anchoring on γ-Fe₂O₃ is performed to synthesize BiOI/γ-Fe₂O₃ core–shell nanoparticles for efficient removal of As(III) via a simultaneous photocatalytic oxidization–adsorption process. The physical and chemical structures of BiOI/γ-Fe₂O₃ are investigated by transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction measurements. The photoluminescence and electron spin resonance (ESR) characterization were employed to ascertain the possible reaction mechanism of visible-light-driven photocatalytic oxidation of As(III). Such BiOI/γ-Fe₂O₃ delivers a superior As(III) removal capability under visible light irradiation with an arsenic removal efficiency of 99.8% within 180 min, higher than those of BiOCl/γ-Fe₂O₃ (81.7%) and BiOBr/γ-Fe₂O₃ (98.9%). The optimal BiOI/γ-Fe₂O₃ (molar ratio of 2:1) is obtained by rationally adjusting the molar ratio of BiOI to γ-Fe₂O₃. The as-synthesized BiOI/γ-Fe₂O₃ performs well in a wide pH range of 2–8. Only coexisting PO₄^3? anions have a significant effect on the As(III) removal. The free radical trapping experiment and ESR results demonstrate that the ?O₂^? and h⁺ are the main active substances for the photocatalytic oxidation of As(III) on BiOI/γ-Fe₂O₃. This work not only gives a novel magnetic core–shell nanoparticle photocatalyst for efficient photocatalytic oxidation and adsorption of As(III) but also offers a new strategy to rationally design BiOX for its related practical applications.     

PC聚合物的再利用研究

聚碳酸酯(PC)是手机外壳常用材料,它是一种综合性能优异的热塑性工程塑料,具有较高的回收价值.采用熔融再生方法分别对同种无涂层手机外壳、浅色混杂带涂层和深色混杂带涂层手机外壳三种PC回收料进行了再生利用,对注塑样品进行了力学性能测试,并对断口进行了分析.研究结果表明,三种PC回收料再生后拉伸强度和弯曲强度值较为接近,其中拉伸强度略低于PC原生料,而弯曲强度高于原生料.无涂层PC回收料延伸率和冲击韧性分别达到了24kJ/m2和65;,而混杂带涂层回收料只有它的一半左右.     

在轴向应力波传播和反射过程中弹性有限长圆柱壳非对称动态屈曲

本文讨论弹性有限长圆柱壳端部受冲击载荷作用，在轴向应力波传播和反射过程中的非对称动态屈曲问题。通过建立和求解扰动方程得到了动态屈曲的分叉条件，临界载荷和屈曲模态。数值结果表明：当壳壁厚不很薄时，轴对称屈曲临界载荷比非轴对称临界载荷高；反之，轴对称临界载荷会比非对称临界载荷低；由于应力波的反射，临界载荷降低，因而更容易发生屈曲，屈曲模态也有其不同特点。     

基于二阶双渐近法的双层圆柱壳在水下爆炸作用下的鞭状运动

针对潜艇在水下爆炸载荷下的鞭状运动,从波动方程出发,推导了二阶双渐近法后期近似,并结合声固耦合法初步解决了双层圆柱壳的内域问题,然后将其与显式有限元耦合形成了圆柱壳结构水下爆炸流固耦合分析方法。通过简单算例验证了本文分析方法的有效性和精度。最后,基于此方法分析了双层圆柱壳结构在水下爆炸载荷下的总体响应特性以及周期比和爆距比对其影响规律。     

双层网格圆底扁球壳的非线性稳定问题

从基于等效夹层壳思想的双层网格扁壳,非线性弯曲理论的变分方程出发,利用坐标变换方法和驻值余能原理,导出双层网格圆底扁球壳,在均布压力作用下的轴对称大挠度方程和边界条件．采用修正迭代法,求得了两类边界条件下双层网格圆底扁球壳的非线性载荷-位移关系式和临界屈曲载荷的解析表达式,并讨论了几何参数对临界屈曲载荷的影响．     

Micellar core-shell-type acrylic-polyurethane hybrid materials with self-polishing property

Abstract

Marine fouling can be a serious problem in the shipping industry, since it increases the surface roughness of the hull and hence its frictional resistance to its movement through water. Antifouling paint can be defined as preventing the attachment of marine organisms onto surfaces. However, the most commonly used antifouling coating which is the tributyltin-based self-polishing copolymer causes the severe pollution of marine environment. Ammonium salt-based paints include tertiary amines as biocides which have effective biocidal and biodegradable properties without accumulation in the sea environment. However, ammonium salt-based coatings were too sensitive to seawater and became swollen. In this study, polyurethane-acrylic copolymers were synthesized by radical polymerization. These hybrid materials were found to form core–shell structures in aqueous media. Synthesis and properties of copolymers were investigated by Fourier transform-infrared spectrometer, proton-nuclear magnetic resonance, transmission electron microscopy, and dynamic light scattering. The polishing rate of self-polishing copolymer was determined from the reduction in dry film thickness after artificial seawater immersion under a dynamic condition.