K2O对Pt—Sn／Al2O3催化剂表面酸性及MCH脱氢稳定性的影响

利用吡啶吸附－ＩＲ，ＮＨ３吸附－脱附，原位热重积炭，ＤＳＣ等技术并结合甲基环己烷（ＭＣＨ）脱氢活性试验，研究了Ｋ２Ｏ对工业Ｐｔ－Ｓｎ／Ａｌ２Ｏ３催化剂的表面酸性及ＭＣＨ脱氢稳定性的影响，结果表明，Ｋ２Ｏ能有效地调变催化剂的表面酸性，降低其表面酸中心特别是强酸中心的数目；ＭＣＨ脱氢反应的积炭量随Ｋ２Ｏ含量的增加而减少，但催化剂的高温脱氢稳定性与Ｋ２Ｏ含量并不完全呈顺变关系，Ｋ２Ｏ含量应严格控制，当Ｋ     

Simultaneous determination of copper and lead in ethanol fuel by anodic stripping voltammetry

The presence of trace metals in car fuels plays an important role in the engine maintenance. In addition, these metals contribute for the environmental contamination in big cities and their control is necessary. Square Wave Stripping Voltammetry (SWSV) is a very sensitive technique for elemental trace determination and was applied for ethanol fuel analysis. The first studies were done searching for the best conditions for copper determination in alcoholic medium, utilizing gold electrodes. During these studies, the possibility of the simultaneous determination of copper and lead in the same experiment was observed. Two procedures for the analysis of these metals were adopted: The direct quantification of metals in alcohol–water mixtures and a second way that involves the evaporation of the organic solvent and re-suspension of the ions with water+electrolyte. Good recovery values were obtained for synthetic samples spiked with known amounts of metals. The results obtained for the two methods were in good agreement. The detection limits for copper and lead in 75% ethanol–water ratio solution were calculated as 120 and 235 ng l⁻¹, respectively, for 15-min deposition time.     

Reactivity and characterisation of various rank turkish bituminous coal chars

A set of seven bituminous coal chars has been characterised by IR spectroscopy (FTIR), thermogravimetry (TG) and elemental analysis. FTIR study provided suitable information to establish differences between coal samples according to their chemical compositions. The reactivity of these samples was also studied and correlated with the coal parameters of mean vitrinite reflectance, fuel ratio and H/C ratio. The data suggest that reactivity as determined can be correlated with the mean vitrinite reflectance, fuel ratio and H/C ratio (0.90). The order of reactivity of samples were; Amasra (S1) (R _m= 0.65)>Azdavay (S4) (R _m=0.99)»Armutcuk (S2) (R _m=0.81)»Acenta (S3) (R _m=0.92)>Ac2l2k (S6) (R _m=1.11) Cay (S5) (R _m=1.03)>Sogutozu (S7) (R _m=2.14).     

Study of transition metal oxide doped LaGaO3 as electrode materials for LSGM-based solid oxide fuel cells

Transition metal oxide doped lanthanum gallates, La_0.9Sr_0.1Ga_0.8M_0.2O₃ (where M=Co, Mn, Cr, Fe, or V), are studied as mixed ionic-electronic conductors (MIECs) for electrode applications. The electrochemical properties of these materials in air and in H₂ are characterized using impedance spectroscopy, open cell voltage measurement, and gas permeation measurement. Three single cells based on La_0.9Sr_0.1Ga_0.8 Mg_0.2O₃ (LSGM) electrolyte (1.13 to 1.65 mm thick) but with different electrode materials are studied under identical conditions to characterize the effectiveness of the lanthanum gallate-based MIECs for electrode applications. At 800 °C, a single cell using La_0.9Sr_0.1- Ga_0.8Co_0.2O₃ as the cathode and La_0.9Sr_0.1Ga_0.8Mn_0.2O₃ as the anode shows a maximum power density of 88 mW/cm², which is better than that of a cell using Pt as both electrodes (20 mW/cm²) and that of a cell using La_0.6Sr_0.4CoO₃ (LSC) as the cathode and CeO₂-Ni as the anode (61 mW/cm²) under identical conditions. The performance of LSGM-based fuel cells with MIEC electrodes may be further improved by reducing the electrolyte thickness and by optimizing the microstructures of the electrodes through processing. Received: 9 January 1998 / Accepted: 1 May 1998     

The use of 1H NMR microscopy to study proton-exchange membrane fuel cells.

To understand proton-exchange membrane fuel cells (PEMFCs) better, researchers have used several techniques to visualize their internal operation. This Concept outlines the advantages of using 1H NMR microscopy, that is, magnetic resonance imaging, to monitor the distribution of water in a working PEMFC. We describe what a PEMFC is, how it operates, and why monitoring water distribution in a fuel cell is important. We will focus on our experience in constructing PEMFCs, and demonstrate how 1H NMR microscopy is used to observe the water distribution throughout an operating hydrogen PEMFC. Research in this area is briefly reviewed, followed by some comments regarding challenges and anticipated future developments.     

cotpp-pt/c作直接甲醇燃料电池阴极催化剂

四苯基钴卟啉;pt催化剂;直接甲醇燃料电池;氧还原     

An NMR study of methanol diffusion in polymer electrolyte fuel cell membranes

Methanol diffusion in two polymer electrolyte membranes, Nafion 117 and BPSH 40 (a 40% disulfonated wholly aromatic polyarylene ether sulfone), was measured using a modified pulsed field gradient NMR method. This method allowed for the diffusion coefficient of methanol within the membrane to be determined while immersed in a methanol solution of known concentration. A second set of gradient pulses suppressed the signal from the solvent in solution, thus allowing the methanol within the membrane to be monitored unambiguously. Over a methanol concentration range of 0.5–8 M, methanol diffusion coefficients in Nafion 117 were found to increase from 2.9 × 10⁻⁶ to 4.0 × 10⁻⁶ cm² s⁻¹. For BPSH 40, the diffusion coefficient dropped significantly over the same concentration range, from 7.7 × 10⁻⁶ to 2.5 × 10⁻⁶cm² s⁻¹. The difference in diffusion behavior is largely related to the amount of solvent sorbed by the membranes. Increasing the methanol concentration results in an increase in solvent uptake for Nafion 117, while BPSH 40 actually excludes the solvent at higher concentrations. In contrast, diffusion of methanol measured via permeability measurements (assuming a partition coefficient of 1) was lower (1.3 × 10⁻⁶ and 6.4 × 10⁻⁷ cm² s⁻¹ for Nafion 117 and BPSH 40 respectively) and showed no concentration dependence. The differences observed between the two techniques are related to the length scale over which diffusion is monitored and the partition coefficient, or solubility, of methanol in the membranes as a function of concentration. For the permeability measurements, this length is equal to the thickness of the membrane (178 and 132 μm for Nafion 117 and BPSH 40 respectively) whereas the NMR method observes diffusion over a length of approximately 4–8 μm. Regardless of the measurement technique, BPSH 40 is a greater barrier to methanol permeability at high methanol concentrations.     

吸热型碳氢燃料在银、镧改性混合分子筛上的裂解研究

为进一步提高吸热型碳氢燃料的吸热能效，考察了吸热型碳氢燃料NNJ－150在USHY和HZSM－5混合分子筛以及银、镧改性混合分子筛催化剂上的催化裂解。结果表明，在Ag-LaUSY Ag-LaZSM-5(75:25)混合分子筛催化NNJ－150裂解反应中，低碳烯烃选择性较高，催化剂寿命较长。采用此催化剂，能较好满足吸热型碳氢燃料裂解的需要。     

高密度燃料HDF-1与橡胶的相容性研究

报道了在室温和70 ℃下橡胶材料G402氟硅胶、丁腈胶5171、丁腈胶4170、贮囊橡胶用合成的高密度燃料HDF-1浸泡后性能如伸长率、邵尔硬度、重量、面积体积的变化，并与采用3号喷气燃料（RP-3）实验结果进行对照。用红外光谱测定了燃料浸泡前后橡胶组成的变化。实验结果表明，G402氟硅胶和贮囊对于HDF-1和RP-3有相近的相容性，丁腈胶5171对HDF-1的相容性比对RP-3的相容性稍差，丁腈胶4170对HDF-1的相容性比对RP-3的相容性更差的结果。因此，丁腈胶5171和丁腈胶4170不能用于HDF-1储存和输送，原使用RP-3系统的橡胶密封件不能直接使用HDF-1。     

高分散直接甲醇燃料电池Pt／C阴极电催化剂的制备过程机理与表征

 通过调变的多元醇法制备了40％Pt／C直接甲醇燃料电池阴极电催化剂，应用透射电镜（TEM）及X射线衍射（XRD）方法表征催化剂．结果表明，由该制备方法可得到高分散，金属粒子粒径分布窄的高载量贵金属催化剂．TEM统计结果表明，调变多元醇法制备的40％Pt／C催化剂的金属粒子平均粒径约为2．9nm．直接甲醇燃料电池单池性能测试表明，该方法制得的40％Pt／C的电催化氧还原能力比同型商品催化剂更好．另外，利用UV－Vis光谱研究了催化剂的制备过程．结果表明，在调变的多元醇法中，Pt4＋的还原是一步完成的．