用液压测功的研究

本文介绍了一种测定发动机输出功率的方法。     

关于颗粒悬浮机理和悬浮动的讨论

从分析气体分子的悬浮和静水中Ｂｒｏｗｎ微粒的悬浮之机理出发,论述了重力场中粒子（分子、微粒等）的悬浮不一定需要其它外力,粒子本身的任何形式的无规则运动,达到一定强度后都能使粒子弥散悬浮．河流中的泥沙颗粒和气（水）力输送管道中的颗粒的悬浮也主要靠颗粒物的无规则运动．作用于颗粒的升力和其它力可改变颗粒悬浮沿高度的分布,但仅用这些力（若无任何无规则运动）无法解释颗粒的弥散悬浮状态．讨论了颗粒对流动阻力的双重作用：支持颗粒悬浮的湍流脉动因引入颗粒而削弱,这是颗粒的减阻作用;颗粒增阻的一个主要机制是,流体给予颗粒的水平动量在颗粒一壁面碰撞中不断地损失．用悬浮动概念解释颗粒引起的增阻是不正确的．     

A Continuum Approach to Two-Phase Porous Media

An axiomatic method is used to derive governing equations of isothermal mechanics of two-phase porous media. The first and second axioms of continuum are formulated in order to define the continuum approach to the problem. A dimensionless number is introduced to simplify the general equations and to obtain the equations of Darcian mechanics. Several aspects of the method and the results are discussed.     

Elastic behavior of uniformly loaded circular corrugated plate with sine-shaped shallow waves in large deflection

By means of modified iteration method, this paper gives approximate solution of the large deflection equations of circular corrugated plate with sine-shaped shallow waves having a central platform under uniform lateral load. A formula of initial modification coefficient is given, and an integral is obtained for the simplification of modified iteration calculations. The results of present paper show better agreement with experimental data and larger applicable range than all other existing solutions of corrugated plates.     

几种水机常用金属材料的冲蚀磨损性能研究

研究了在水力机械中普遍应用的铸铁(HT200)、中碳结构铸钢(40#)、不锈钢(1Cr18Ni9Ti)和高铬铸铁(KmTBCr26)4种材料的冲蚀磨损规律,得出了材料的冲蚀磨损率随磨损时间、冲蚀速度、磨粒浓度和粒径变化的规律,同时根据观察材料冲蚀磨损表面形貌探讨了其冲蚀磨损机理.结果表明:材料的冲蚀磨损性能受到材料基本机械性能的控制,其中高硬度材料的抗冲蚀性能较好,在相同试验条件下其磨损率由大到小排列顺序为HT200＞40#＞1Cr18Ni9Ti＞KmTBCr26;4种材料的冲蚀磨损率随磨粒粒径、浆料浓度和磨粒冲击速度的变化规律基本一致,当磨粒粒径小于425 μm时,磨粒粒径对KmTBCr26和1Cr18Ni9Ti的磨损率影响很小;金属材料的组织结构对材料的冲蚀磨损性能和机理影响较大,其中KmTBCr26和1Cr18Ni9Ti的冲蚀磨损机理以脆性断裂、破裂及颗粒脱落为主,而HT200和40#的冲蚀磨损机理以选择性切削式冲蚀磨损为主.     

Analysis of flow in the plate‐spiral of a reaction turbine using a streamline upwind Petrov–Galerkin method

The prediction of the flow field in a novel spiral casing has been accomplished. Hydraulic turbine manufacturers are considering the potential of using a special type of spiral casing because of the easier manufacturing process involved in its fabrication. These special spiral casings are known as plate‐spirals. Numerical simulation of complex three‐dimensional flow through such spiral casings has been accomplished using a finite element method (FEM). An explicit Eulerian velocity correction scheme has been deployed to solve the Reynolds‐average Navier–Stokes equations. The simulation has been performed to describe the flow in high Reynolds number (10⁶) regimes. For spatial discretization, a streamline upwind Petrov–Galerkin (SUPG) technique has been used. The velocity field and the pressure distribution inside the spiral casing reveal meaningful results. Copyright © 2000 John Wiley & Sons, Ltd.     

A bore-capturing finite volume method for open-channel flows

A high-resolution finite volume hydrodynamic solver is presented for open-channel flows based on the 2D shallow water equations. This Godunov-type upwind scheme uses an efficient Harten–Lax–van Leer (HLL) approximate Riemann solver capable of capturing bore waves and simulating supercritical flows. Second-order accuracy is achieved by means of MUSCL reconstruction in conjunction with a Hancock two-stage scheme for the time integration. By using a finite volume approach, the computational grid can be irregular which allows for easy boundary fitting. The method can be applied directly to model 1D flows in an open channel with a rectangular cross-section without the need to modify the scheme. Such a modification is normally required for solving the 1D St Venant equations to take account of the variation of channel width. The numerical scheme and results of three test problems are presented in this paper. © 1998 John Wiley & Sons, Ltd.     

Arsenic Compounds in Terrestrial Organisms I: Collybia maculata,Collybia butyracea and Amanita muscaria from Arsenic Smelter Sites in Austria

Three mushroom species from two old arsenic smelter sites in Austria were analyzed for arsenic compounds. The total arsenic concentrations were determined by ICP–MS. Collybia maculata contained 30.0 mg, Collybia butyracea 10.9 mg and Amanita muscaria 21.9 mg As kg⁻¹ dry mass. The arsenic compounds extracted with methanol/water (9:1) from the dried mushroom powders were separated by HPLC on anion-exchange and reversed-phase columns and detected by ICP-MS using a hydraulic high-pressure nebulizer. In Collybia maculata almost all arsenic is present as arsenobetaine. Collybia butyracea contained mainly arsenobetaine (8.8 mg As kg⁻¹ dry mass) and dimethylarsinic acid (1.9 mg As kg⁻¹). Amanita muscaria contained arsenobetaine (15.1 mg As kg⁻¹), traces of arsenite, dimethylarsinic acid and arsenate, and surprisingly arsenocholine (2.6 mg As kg⁻¹) and a tetramethylarsonium salt (0.8 mg As kg⁻¹). © 1997 by John Wiley & Sons, Ltd.     

AN ADAPTIVE FINITE ELEMENT SCHEME FOR HYDRAULIC FRACTURING WITH PROPPANT TRANSPORT

A mathematical model and adaptive finite element scheme are developed for describing the distribution of proppant in a propagating hydraulic fracture. The governing equation for proppant concentration is derived by applying the conservation law of mass to the proppant and to the proppant-laden fluid. Shah's empirical equation, which relates the proppant concentration and the indices of the non-Newtonian fluid, is used to describe the proppant-laden fluid. The proppant distribution inside a hydraulic fracture can then be obtained by solving the proppant concentration equation together with the governing equations of fluid and elasticity for a hydraulic fracturing. A novel moving grid scheme is developed that combines grid point insertion with redistribution. Four examples corresponding to different in situ stress distributions are computed to demonstrate the scheme. © 1997 by John Wiley & Sons, Ltd.     

Initialization of phase-field fracture propagation in porous media using probability maps of fracture networks.

It is well known in the geophysical community that surface deflection information/micro-seismic data are considered to be one of the best diagnostics for revealing the volume of rock fracture. However, the in-exactness of the data representing the deformation induced to calibrate and represent complex fracture networks created and connected during hydraulic fracturing presents a challenge. In this paper, we propose a technique that implements a phase-field approach to propagate fractures and their interaction with existing fracture networks using surface deflection data. The latter one provides a probability map of fractures in a heterogeneous reservoir. These data are used to initialize both the location of the fractures and the phase-field function. In addition, this approach has the potential for optimizing well placement/spacing for fluid-filled fracture propagation for oil and gas production and or carbon sequestration and utilization. Using prototype models based on realistic field data, we demonstrate the effects of interactions between existing and propagating fractures in terms of several numerical simulations with different probability thresholds, locations, and numbers of fractures. Our results indicate that propagating fractures interact in a complex manner with the existing fracture network. The modeled propagation of hydraulic fractures is sensitive to the threshold employed within the phase-field approach for delineating fractures.