The optical nonreciprocal response based on a four-mode optomechanical system

We propose a scheme for realizing the optical nonreciprocal response based a four-mode optomechanical system,consisting of two charged mechanical modes and two linearly coupled optical modes. Two charged mechanical modes are coupled by Coulomb interaction, and two optical modes are coupled to one of mechanical modes by radiation pressure. We numerically evaluate the transmission probability of the probe field to obtain the optimum optical nonreciprocal response parameters. Also, we show that the optical nonreciprocal response is caused by the quantum interference between the optomechanical couplings and the linearly coupled interaction that breaks the time-reversal symmetry.     

Enhancing optomechanical force sensing via precooling and quantum noise cancellation

We theoretically investigate optomechanical force sensing via precooling and quantum noise cancellation in two coupled cavity optomechanical systems.We show that force sensing based on the reduction of noise can be used to dramatically enhance the force sensing and that the precooling process can eifectively improve the quantum noise cancellation.Specifically,we examine the effect of optomechanical cooling and noise reduction on the spectral density of the noise of the force measurement;these processes can significantly enhance the performance of optomechanical force sensing,and setting up the system in the resolved sideband regime can lead to an optimization of the cooling processes in a hybrid system.Such a scheme serves as a promising platform for quantum back-action-evading measurements of the motion and a framework for an optomechanical force sensor.     

增材制造金属反射镜的发展综述

随着光学测量与遥感领域的不断发展,折反式光学系统对重量、体积和环境适应性等需求不断提高。基于增材制造技术的金属反射镜以其便于实现优化设计、快速制造和加工工艺性好等优点,逐渐获得国内外学者的关注与研究。与传统金属反射镜相比,增材制造金属反射镜可以提高反射镜的结构刚度,同时可实现更高程度的轻量化。增材制造反射镜可以满足光学系统对环境适应性和快速性的需求。本文首先讨论了金属反射镜的评价指标;其次,综述了国内外在基于增材制造技术制备金属反射镜领域的发展现状和技术参数,从增材制造金属反射镜的基体设计与制备和基体的后处理2个方面展开论述;然后,通过分析,总结了增材制造金属反射镜的技术路线和关键技术;最后,对增材制造反射镜的应用前景提出了展望。     

基于自由曲面反射镜的低投射比超短焦投影物镜的光学设计

为了设计低投射比的超短焦投影物镜,本文采用自由曲面和折反式的光路结构设计了一种具有低投射比的超短焦投影物镜系统。该物镜由一个旋转对称的折射透镜组和一个自由曲面反射镜组成。采用11.938 mm的数字微镜器件(DMD)作为空间光调制器产生图像源。采用法线加权迭代优化的方法计算自由曲面。最后,分析了系统的性能。仿真结果表明:超短焦投影物镜可在580 mm的投影距离处实现3048 mm尺寸的大屏幕投影,系统的投射比低至0.19,系统的最大畸变小于0.72%。能够满足低投射比超短焦投影物镜的设计要求。该投影系统具有低投射比、低畸变、投影效果好等优点,可为超短焦投影系统的进一步发展提供有益参考。     

一种限制周期气固两相流直接数值模拟中整体质量流率的新方法

全周期边界条件的气固两相流系统是研究气固相互作用的一个常用计算模型。为平衡周期气固系统在流向上的受力,常对系统施加平衡系统总重力的固定压力梯度,但由于数值误差的影响,这种固定压力梯度的方法会使得气固系统整体不断加速进而导致模拟失真。为了降低系统质心加速度的影响,本文先后采用了前人提出的固定整体质量流率方法和本文提出的压力梯度后验修正方法,并对两种方法的模拟结果进行了对比。     

Experimental and numerical study of the propagation of focused wave groups in the nearshore zone

The propagation of focused wave groups in intermediate water depth and the shoaling zone is experimentally and numerically considered in this paper. The experiments are carried out in a two-dimensional wave flume and wave trains derived from Pierson-Moskowitz and JONSWAP spectrum are generated. The peak frequency does not change during the wave train propagation for Pierson-Moskowitz waves; however, a downshift of this peak is observed for JONSWAP waves. An energy partitioning is performed in order to track the spatial evolution of energy. Four energy regions are defined for each spectrum type. A nonlinear energy transfer between different spectral regions as the wave train propagates is demonstrated and quantified. Numerical simulations are conducted using a modified Boussinesq model for long waves in shallow waters of varying depth. Experimental results are in satisfactory agreement with numerical predictions, especially in the case of wave trains derived from JONSWAP spectrum.     

气力提升系统气液两相流数值模拟分析

污水处理、油田采油、液态金属冷却反应堆和磁流体动力转换器等领域采用气力提升系统有其显著优势.由于不同液体介质与气体介质密度对气力提升系统性能影响较大,因此本文基于Fluent仿真软件,采用欧拉模型、k-ω剪切应力输运湍流模型数值模拟了氮气-水、氮气-煤油、氮气-水银及空气-水、氩气-水、氮气-水下气力提升系统内气液两相流动行为,分析了系统稳定时提升立管内气相体积分数、提升液体流量、提升效率、提升管出口处液体径向速度的变化规律.研究结果表明:1)氮气-水、氮气-煤油、氮气-水银系统中,提升管内液体介质密度越大,提升管内气相体积分数越小、提升液体流量越大、提升效率越高;2)空气-水、氩气-水、氮气-水系统中,提升管内气体介质密度越大,提升管内气相体积分数越小、提升液体流量越大、提升效率峰值越小;3)提升管出口处提升液体径向速度随气体充入量的不断增加而整体波动升高,最终管轴中心附近液体速度较大,管壁附近液体速度较小.本文研究成果为污水处理、气举采油、液态重金属冷却核反应堆和磁流体动力转换器等应用领域的气力提升技术的优化提供科学的理论基础.     

玻色化方法在超对称可积系统的应用

利用玻色化方法可以避免超对称可积系统中反对易费米场带来的计算困难. 本文以N=1超对称mKdVB系统为例, 利用玻色化方法, 将其转化为只有玻色场的耦合系统. 应用标准的WTC方法, 证明了该耦合系统具有Painlevé性质. 运用Painlevé截断方法, 可以得到玻色化后超对称mKdVB系统的非局域对称. 为了求解与非局域对称相关的Lie第一性原理, 引入新的场将玻色化后系统拓展为更大的系统. 通过引入新的场, 该非局域对称局域化为Lie点对称. 因此, 可以利用Lie点对称约化方法研究拓展后的系统, 得到超对称mKdVB系统的孤子与其他孤波相互作用解.     

基于像差特征分析的变焦光学系统装调

提出了一种基于像差特征分析的变焦系统共轴性装调方法。针对某型20倍变焦光学系统的装调,在分析变焦光学系统装调要求的基础上,通过采用光学定心加工技术,提高变焦系统各镜组内光学元件的同轴度;采用Zygo干涉仪,检测变焦系统在长短焦位置的像差特性分布;借助CodeV软件仿真计算各光学元件在系统中的公差灵敏度分布,并确定产生像差影响的敏感光学元件;在中心偏测量仪上,完成最终光学系统像质的调整。此外,还设计了一种变焦光学系统各动组间同轴度调试装置,对变焦相机主镜筒机械内孔轴线与直线导轨的平行性进行了精确测量,保证了动组组元光轴的同轴精度。装调结果表明:变焦系统成像质量有明显改善,像面一致性得到保证,长短焦轴上传递函数值分别优于技术要求值0.45和0.55,长短焦轴外0.7视场传递函数值优于0.25和0.35,实现了高精度装调,验证了该方法的可靠性。     

氨基酸-BrO-3-Mn2+-H2SO4-丙酮体系的振荡反应

This paper, Using potentiometric method, first reports the oscillating behavior of five amino acids (L-methionine, L-cystine, L-tryptophan, L-serine, L-tyrosine) in a new oscillating system of amino acid-BrO_3~--Mn~(2+)-H_2SO_4-acetone. The effect of many factors on oscillation have been investigated. According to Arrhenius equation, the apparent activation energy of the oscillatary induction period and oscillation period of five oscillating systems are obtained within temperature range of 20～37 ℃.